Boards Compatible with Arduino
Showing 1–24 of 39 results
-
Development Boards
Adafruit ESP32 Feather V2 – 8MB Flash + 2 MB PSRAM – STEMMA QT
- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual-mode Bluetooth (classic and BLE)
- On-board PCB antenna
- Ultra-low noise analog amplifier
SKU: n/a -
-
Development Boards
Adafruit Feather RP2040
- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
SKU: n/a -
-
-
Development Boards
Adafruit Trinket M0 – for use with CircuitPython & Arduino IDE
- Same size, form factor, and pinout as a classic Trinket
- Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
- 256KB Flash – 32x as much as 8 KB on ATtiny85
- 32 KB RAM – 64x as much as 512 bytes on ATtiny85
- 48 MHz 32-bit processor – 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
- Native USB supported by every OS
SKU: n/a -
Development Boards
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: n/a -
Development Boards
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
SKU: n/a -
Development Boards
Cytron Uno Board ATmega328 Microcontroller (Arduino Compatible)
- A better version of Arduino Uno
- SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader
- USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable)
- Input voltage: DC7-15V
- 14 Digital I/O Pins (6 PWM outputs)
SKU: n/a -
Development Boards
DFRduino Mega2560 (Arduino Mega 2560 R3 Compatible)
- Controller Model: ATmega2560
- Operating Voltage: 5V
- Input Voltage(VIN): 3-16V(20V max)
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Inputs: 16 I/O
- FLASH: 256 KB (of which 4 KB is used by the bootloader)
- Frequency: 16MHz
SKU: n/a -
-
-
Development Boards
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: n/a -
Development Boards
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
-5%
Development BoardsMega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
SKU: n/a -
-
Development Boards
Mega 2560 ATmega2560-16AU Board without USB Cable for Arduino
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: n/a -
Development Boards
Mega R3 Android Accessory Development Kit (ADK) + USB Cable
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
SKU: n/a -
Development Boards
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board
- The board is compatible with Mega 2560.
- excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA
SKU: n/a -
Development Boards
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
-56%
Development BoardsNano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a
