Gas and Dust Sensor
Showing 1–24 of 162 results
-
-
Sensors
Adafruit SGP40 Air Quality Sensor Breakout – VOC Index – STEMMA QT/Qwiic
- Circuit: SGP40
- Supply voltage: 3 V to 5 V
- Communication interface: I2C
- I2C communication interface address: 0x59
- VOC Measuring range: 0 ppm to 1000 ppm
- VOC index value Measuring range: 0 to 500
- Connectors: STEMMA QT / Qwiic
SKU: n/a -
Sensors
AMPHENOL ADVANCED SENSORS Gas Detection Sensor, Carbon Dioxide, 2000 ppm, 3 %, Non-dispersive Infrared (NDIR)
-19%
SensorsAMPHENOL ADVANCED SENSORS Gas Detection Sensor, Carbon Dioxide, 2000 ppm, 3 %, Non-dispersive Infrared (NDIR)
- Measurement Range: 0 to 5000 ppm
- Dimensions: 30mm x 15.6mm x 8.6mm
- Accuracy: 400-5000 ppm +/- 30 ppm ± 3% of reading
- Temperature Dependence: 5 ppm per °C or 0.5% of the reading per °C,
- Stability: < 2% of FS over life of sensor (15 years typical)
SKU: n/a -
-
Sensors
CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector With LCD Display
- LCD Displayer (optional): 4 digits LCD displayer.
- Audibility: 85dB ( at 1m distance ), Frequency 3 – 0.5KHZ.
- Standby Current: <50μA.
- Alarm Current: <50mA.
- Standby Mode: Green Led flashes once every 30 seconds.
SKU: n/a -
Sensors
DF Robot Gravity PH3 Sensor (Calibrated) – I2C & UART
- Detection Gas: CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, HF(Need to change different probe).
- Working Voltage: 3.3～5.5V DC.
- Working Current: <5mA.
- Output Signal: I2C, UART output (0~3V), analog voltage (see the characteristic parameters of specific probe).
- Working Temperature: -20～50℃.
SKU: n/a -
Sensors
DFRobot Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
- Product: DFRobot Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
- DC Supply Voltage: Typ: 5V Min: 4.5V Max: 5.5V
- Working Current: ≤100mA
- Single Response Time: ＜1s
- Particle Counting Efficiency: 50%@0.3μm, 98%@>=0.5μm
SKU: n/a -
-
Sensors
DFRobot Fermion: MEMS Gas Sensor – MiCS-2714 (Breakout)
- Operating voltage: 4.9～5.1V DC
- Power dissipation: 0.45W
- Output signal: Analog quantity
- Measuring range:1 – 1000ppm(Hydrogen H2) ,0.05 – 10ppm(Nitrogen dioxide NO2 )
- Working temperature: -30～85℃
- Working humidity: 5～95%RH （No condensation）
SKU: n/a -
-
