Light/color Sensor
Showing 1–24 of 37 results
-
Sensors
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70˚C (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
SKU: n/a -
Sensors
Adafruit TSL2591 High Dynamic Range Digital Light Sensor – STEMMA QT
- Approximates Human eye Response
- Extremely wide dynamic range 1 to 600,000,000 Counts
- Lux Range: 188u Lux sensitivity, up to 88,000 Lux input measurements
- Voltage range: 3.3-5V into the onboard regulator
- This board/chip uses I2C 7-bit addresses 0x29 and 0x28 (yes BOTH!)
SKU: n/a -
Sensors
Adafruit VCNL4040 Proximity and Lux Sensor – STEMMA QT/Qwiic
- Proximity sensor works from 0mm to 200mm
- The light sensor has a range of 0.0125lux to 6553lux
- 80ms integration time is 6553.5lux
- 640ms integration time is 819.2lux
- I2C interface
- SparkFun qwiic compatible STEMMA QT connectors
SKU: n/a -
-
Sensors
CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino
- Working voltage:2.8-3.8V
- ALS, IR LED and Proximity Detector in an Optical Module;
- Ambient Light Sensing (ALS);
- Approximates Human Eye Response;
- Programmable Interrupt Function with Upper and Lower Threshold;
- Up to 16-Bit Resolution;
- High Sensitivity Operates Behind Darkened Glass;
- Low Lux Performance at 0.01 lux;
SKU: n/a -
Sensors
CJMCU-34725 TCS34725 Color Sensor RGB Module
- Operating Voltage: 3.3V
- Supply Voltage: 3.3V-5V
- The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing
- Color management is more accurate.
- The high sensitivity.
- Wide dynamic range.
- IR shading filters make the TCS3472 ideal.
SKU: n/a -
-
-
-
Sensors
DFRobot Fermion: AS7341 11-Channel Visible Light Sensor (Breakout)
- Power Supply: 3.3V~5V
- Visible Light Detection Range: F1(405-425nm), F2(435-455nm), F3(470-490nm), F4(505-525nm), F5(545-565nm), F6(580-600nm), F7(620-640nm), F8(670-690nm)
- Operating Current(LED Off): <5mA
- LED Driving Current: Class 1-20 (4-42mA)
- I2C Address: 0x39
- Operating Temperature Range: -30℃~85℃
SKU: n/a -
-
-
Sensors
Digital LDR Module
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
SKU: n/a -
