PIR / IR and Optical Sensor

1. DC-INPUT： working voltage or input supply voltage (range is DC 3V～12V)
2. VOUT： signal output pin. Output: High-level signal 3V； Standby 0V。
Voutput can be as same as DC-Input by adding some components
3. Delay time adjustment: the default delay time is 10s, which can be adjusted by changing the resistor

1. Working voltage: 5V
2. Uses infrared light detection, anti-jamming capability, using CTRT5000 sensor, adjustable sensitivity, stable performance
3. With lights, a fixed bolt hole for easy installation

1. Working voltage (V): 3.3 ~ 5
2. Working current (A): Above 1A
3. Operating Temperature (℃): -10 ~ +50
4. Mounting hole: M3
5. Detection range: 1mm ~ 60 cm adjustable.

1. Type: PIR Switch
2. Delay timing: 15 Sec, 45 Sec, and 5 Min.
3. Working Voltage/Frequency: AC110-240V, 50/60Hz
4. Sensing Distance: 4-6m
5. Fitting Diameter: 40 mm
6. Angle Coverage: 110 degrees

1. Product: THERMOPILE IR SENSOR
2. Model no: ZTP-135L
3. Operating Temperature: -20°C ~ 100°C
4. Time Constant: 25ms
5. Resistance: 103
6. Small-size sensor (TO-46 package)
7. Included ambient temperature (thermistor) sensor for compensation
8. High sensitivity
9. Fast response time

1. The sensor provides an analog output signal that is proportional to the detected motion, which can be used by the alarm system to trigger an alarm or perform other actions.
2. The sensor consumes very little power, making it ideal for use in battery-powered applications.
3. The sensor has a wide detection range of up to 12 meters, allowing it to detect motion in a large area.
4. The sensor’s sensitivity can be adjusted to suit the specific needs of the application, providing users with greater control and flexibility.

1. Model: AS-10
2. Input Voltage :DC/AC 24V 220V
3. Max Load Current: 10A
4. Frequency: 50-60HZ
5. Dimensions: 10 x 4.2cm

1. Quad Elements
2. Same horizontal and vertical detection angles
3. Slight movement can be detectable
4. Low power Consumption

1. Schmidt REL output
2. Low voltage, low power consumption, instantaneous settling after power-up
3. No. of Pins: 6

1. Operating Voltage: 4.5V – 5.5V
2. Reverse polarity protection.
3. Breadboard friendly
4. Active low output
5. NPN output with internal pull up

1. Large detection angle
2. Custom design is available
3. Higher in cost-performance

1. Low consumption
2. Custom design is available
3. Higher in cost-performance
4. Field of View: XX: 138º & YY: 125º