Programmers
Showing all 21 results
-
Development Boards
EZP2019+ High Speed USB SPI Programmer Support 24/25/26/93 Series Chip EEPROM Flash Bios Standard configuration
-19%
Development BoardsEZP2019+ High Speed USB SPI Programmer Support 24/25/26/93 Series Chip EEPROM Flash Bios Standard configuration
- Material: ABS+PCB
- Type: 1-3 (optional)
- USB interface: USB 2.0 interface
- Support 24/25/26/93 series chips
- Programmer size: 71 * 44 * 19mm
- Programmer weight: 37g
- Package size: 150 * 100 * 38mm
- Package weight: Type 1: 113g
SKU: n/a -
Development Boards
ICSP Programmer Socket – UIC-S
-
No external power needed
-
Power Indicator LED on board
-
Fit perfectly with UIC00A and UIC00B
-
Support 18-pin, 28-pin, and 40-pin 8-bit PIC microcontroller.
-
Selector to program 18-pin or 28-pin&40-pin PIC
-
Come with 40-pin ZIF socket for ease of plug and unplug of PIC
SKU: n/a -
-
Development Boards
MICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID
-16%
Development BoardsMICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID
- Model: MICROCHIP Evaluation Kit, ATSAMD10 MCU
- Free Atmel IDE for development of C/C++ and assembler code for Atmel microcontrollers
- Programming and debugging the ATSAMD10 Xplained Mini
- You can programming the ATmega32U4 Using a Bootloader
- Xplained Pro extension headers can easily be strapped in
SKU: n/a -
Development Boards
MICROCHIP Evaluation Kit, SAM C21 Xplained Pro, ATSAMC21J18A MCU, On Board Embedded Debugger
-10%
Development BoardsMICROCHIP Evaluation Kit, SAM C21 Xplained Pro, ATSAMC21J18A MCU, On Board Embedded Debugger
- Model: SAM C21 Xplained Pro, ATSAMC21J18A MCU
- Product: On Board Embedded Debugger
- 3.3 and 5V selectable target voltages
- Level converters between target section and EDBG section
- 32.768kHz Crystal mounted
- 16MHz crystal footprint (not mounted)
SKU: n/a -
Development Boards
PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
-10%
Development BoardsPIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
- Comprehensive information prompts, allowing users to understand the working state.
SKU: n/a -
Development Boards
PICkit3 Debugger Programmer Emulator Controller Development Board
- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Program up to 512K byte flash.
SKU: n/a -
-
Development Boards
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
- 5V power supplied by a USB connector
- USB 2.0 full speed compatible interface
- USB standard A to mini B cable
- 1.65V to 5.5V application voltage supported on SWIM interface
- SWIM low speed and high-speed modes supported
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32F302R8T6 MCU, On Board Debugger, Arduino Uno Compatible
-19%
Development BoardsSTMICROELECTRONICS Development Board, STM32F302R8T6 MCU, On Board Debugger, Arduino Uno Compatible
- Model: STM32F302R8T6 MCU
- Voltage: 3.3V, 5V, 7-12V
- Two push buttons for user and reset
- Three interfaces supported on USB. Virtual Com port, Mass storage and Debug port
- STM32 comprehensive software HAL library
- Supported by Integrated Development Environments (IDEs) including IAR, Keil, GCC based IDEs
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho
-20%
Development BoardsSTMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho
- USB VBUS or external source (3.3V, 5V, 7 to 12V) and power management access point
- USB communication (LD1), user LED (LD2), power LED (LD3)
- Two push buttons – USER and RESET
- USB re-enumeration capability – virtual com port, mass storage, debug port
- Supported by wide choice of IDEs including IAR, Keil, GCC-based IDEs
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32L432KC MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino Connectivity
-19%
Development BoardsSTMICROELECTRONICS Development Board, STM32L432KC MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino Connectivity
- Model: STM32L432KC MCU
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- STM32 microcontroller in 32-pin package
SKU: n/a -
Development Boards
T48 Universal Programmer Kit with 6 IC Adapters
- T48 (TL866-3G) hardware Parameters: 32-bit MCU with 120MHZ, 4-layer PCB Design, USB2.0 HS 480MHZ;
- Volume: 10X6.5X2.8 cm (almost the same as TL866II);
- 16-channel ISP, total 56-channel dedicated IO, 56-channel high-speed high-voltage isolation;
- VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable;
- Power consumption: 5V <500MA.
SKU: n/a -
Development Boards
TL866II Plus Universal Programmer Kit with 6 IC Adapters
- Model: TL866II Plus
- With Multi-functional ICSP interface
- 40pin ZIF socket, fully automatic, support fast mode SPI
- USB interface for both data transfer and power supply
- With over-voltage and over current protection
- Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
- English Language Support
- It can program faster than another programmer 500%~1000%
SKU: n/a -
Development Boards
TW Link V2 Programmer For STM8 and STM32
- Voltage: 5V
- The wiring is very simple because the interface definition is marked directly on the aluminum housing protects
- Internal board of this programmer is with 500MA self-recovery fuse
- It’s convenient and practical, fast speed and stable
- The interface easy to use simple horns seat pitch of 2.54
- Weight: 10g
SKU: n/a -
Development Boards
USB ICSP PIC Programmer – UIC00B
- Program most of the +3.3V or +5V PIC
- Compatible with PICkit2’s UART Tool and Logic Tool
- The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
-
Compatible with Windows XP, Vista, 7, 8 and 8.1.
-
Compatible with Microchip’s PICkit 2.
-
Powered directly from the USB port.
-
NO EXTERNAL POWER REQUIRED for UIC00B to function.
-
Compatible with PICkit2’s Logic Tool and UART Tool.
SKU: n/a
