Vibration/Tilt Sensor and Modules
Showing 1–24 of 26 results
-
Sensors
801S Vibration Shock Sensor Module
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SKU: n/a -
Sensors
COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel
- Product: COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A
- Make Angle: 10° MAX Below Horizontal
- Break Angle: 10° MAX Above Horizontal
- Differential Angle: 15° MAX
- Operating Temperature: -37° to 100°C
- Resistant to Ambient Environmental Conditions
- Case Material Tin Plated
- Hermetically Sealed & Inert Gas Filled
SKU: n/a -
-
-
Sensors
Normally open vibration sensor module
- The working voltage of 3.3V-5V.
- Using the company’s high-sensitivity vibration switch, the default with SW-18015P vibration sensor.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
SKU: n/a -
-
-
Sensors
Reed Switch 2 x 14 mm Magnetic Control Switch -Normally Open Contact-(Pack of 10 Pcs.)
- Small Module.
- Very easy to use.
- Glass Length: 14mm
- Glass Diameter: 2mm
- Total Length: 45mm
- Max. Switching Voltage: 300 VDC
- Min. Breakdown Voltage: 150 VDC
- Max. Contact Rating: 10W
- Max. Switching Current: 0.55 A
- Max. Operate time: 0.45 ms
SKU: n/a -
Sensors
TE CONNECTIVITY DT1-028KPiezo Film Sensor, Vibration, DT Series, Without Leads, 1.38 nF
- Model: DT1-028K
- Product: Piezo Film Sensor
- Min. input impedance: 1 MΩ, recommended: 10 MΩ
- Thin Piezo polymer w/ high piezo activity
- Flexible silver ink metallization
- Easy to use
- Easy to install
- Good quality product
SKU: n/a -
Sensors
Vibration sensor module alarm Motion sensor module vibration switch SW-420
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
SKU: n/a -
Sensors
Vibration Switch Module
- No direction, any angle can trigger the work.
- Sensitivity switches can be selected for the trigger sensitivity according to circuit requirements.
- This switch is suitable for the trigger of the small current circuit.
- Component Type: SW-18015P
- Maximum voltage: 12V
- Rated Heating Current: 20mA
SKU: n/a
