Width: 8 mm
Type: Polyimide Tape.
Heat Resistance: 200℃.
Thickness Tolerance: ±10% .
One-side Self-adhesive.
-18%
Basic Electronic Components, DIY Kits, DIY Learning and Robot Kits
8mm High Temperature Heat Resistant Polyimide Koptan Tape Hot
Availability:
39 in stock
Width: 8 mm
Type: Polyimide Tape.
Heat Resistance: 200℃.
Thickness Tolerance: ±10% .
One-side Self-adhesive.
₹180.00 ₹220.00
39 in stock
CompareBased on 0 reviews
Be the first to review “8mm High Temperature Heat Resistant Polyimide Koptan Tape Hot”
Related products
-
Basic Electronic Components
1 ohm Resistor
1 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications.
We made it available in the form of a bunch of different values as required for the project to provide convenience, so you need not find a differently required value resistor at different places while working on your project.
SKU: n/a -
Basic Electronic Components
7 x 5cm PCB Prototyping Printed Circuit Board Prototype Breadboard
Description:
Material: Bakelite
Color: Like the picture show
Quantity: 1 pc
Each measures 5 x 7cm with 2520 through holes (0.1 inch industrial standard spacing) for mounting components
Referencing numbers printed on both sides for easy reference of individual holesSpecification:
Dimension: 5 x 7cm
Thickness: 1.5mm
Hole pitch: 2.54mm
Hole inner diameter: 1.0mmPackage included:
1 x 12 x 18cm PCB prototyping printed circuit experimental board
SKU: n/a -
Basic Electronic Components, Sensors
Eye Blink Sensor Project Kit
The Eye-Blink sensor works by illuminating the eye and eyelid area with infrared light, then monitoring the changes in the reflected light using a phototransistor and differentiator circuit.
This includes Arduino Nano, Eye Blink sensor, Buzzer, Battery, Clip Connector, and Switch.
Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
A Standard Active Buzzer Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.
This is a general 9v Battery for all your project and application needs.
A clip Connector is used to connect a 9V battery to the application. This snap power cable to DC 9V clip male line battery adapter for mostly used to power Arduino boards.
Rocker switch is Rocker Switch SPST ON/OFF Microswitch.
SKU: n/a
There are no reviews yet.