- Model: N37
- Type: Metal gear Motor D Type
- Operating Voltage: 12V
- Rated RPM: 50
N37 12V 50RPM Metal Gear Motor D type
- Model: N37
- Type: Metal gear Motor D Type
- Operating Voltage: 12V
- Rated RPM: 50
₹1,000.00 ₹1,500.00
Based on 0 reviews
Be the first to review “N37 12V 50RPM Metal Gear Motor D type” Cancel reply
Related products
-
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
-40%Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
0 out of 5(0)- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA Dc Bo Dual Shaft Smart Plastic Car Robot Gear Motor For Arduino – Yellow, Pack of 1
-70%Motors | Drivers | Pumps | ActuatorsAEROKART INDIA Dc Bo Dual Shaft Smart Plastic Car Robot Gear Motor For Arduino – Yellow, Pack of 1
0 out of 5(0)- The 150 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a low-cost geared DC Motor. It is an alternative to metal gear DC motors.
- Low density | Lightweight | Low inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Inherent lubricity | Relatively low coefficient of friction
- Shaft length:7 mm Motor Design:L-Shaped Shaft Diameter:5.5 mm Size:55x48x23 mm
- The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car.
- Operating Voltage:3 to 12V Current (without loading):40-180mA RPM:150 Output Torque:0.8 kg cm
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 3pcs Mini Water Pump DC 3V 5V Micro Submersible Motor Pump + 3M Clear Vinyl Tubing Flexible PVC Tubing for Fish Tank Fountain Aquarium Garden Plant Flower
-17%Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 3pcs Mini Water Pump DC 3V 5V Micro Submersible Motor Pump + 3M Clear Vinyl Tubing Flexible PVC Tubing for Fish Tank Fountain Aquarium Garden Plant Flower
0 out of 5(0)- 【Application】Our mini water pump and vinyl tubing set, which is great for fish tank, aquarium, plant watering etc.
- 【Long Working Time】Our mini Pump continuous service life of up to more than 300 hours.
- 【Big Flow Rate 】It looks small in shape, its big flow rate that can be 100L/H.
- 【Mini Water Pump】Voltage: DC 3V-5V; Style: Horizontal; Current: 100-200mA
- 【3M Vinyl Tubing】Length: 3M; Inside Diameter=0.22″/5.54mm; Outside Diameter=0.32″/8.20mm; Smooth inner surface for easy flow and easy cleaning.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
-38%Motors | Drivers | Pumps | Actuators12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
0 out of 5(0)12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)
SKU: n/a
There are no reviews yet.