- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Connector:Â DF13 Plug
- Wire length: 190mm
- Size: Dia 30mm
-23%
Flight Controller & Accessories
Pixhawk buzzer
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Connector:Â DF13 Plug
- Wire length: 190mm
- Size: Dia 30mm
₹199.00 ₹259.00
Related products
-
Drone Parts, Flight Controller & Accessories
DJI NAZA-M Lite V1.1 with GPS Kit
- Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6.
- Supported ESC Output: 400Hz refresh frequency.
- Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels.
- Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V).
- Weight: MC:25g; VU:20g; GPS:21.3g.
- All-in-One Design.
- Advanced attitude stabilized Algorithm.
- Multiple flight control mode/intelligent switching.
- GPS Module Available/Accurate Position hold.
- Intelligent Orientation Control (IOC).
- Failsafe mode.
SKU: n/a -
Drone Accessories, DRONE COMBO, Drone Frame and Accessories, Drone Gimbal Accessories, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & Accessories, FPV Antennas and Trans-Receivers, FPV Cameras, GPS Modules, Propellers
AEROKART INDIA UAV FULL CARBON FIBRE FRAME V650 V.22
-31%
Drone Accessories, DRONE COMBO, Drone Frame and Accessories, Drone Gimbal Accessories, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & Accessories, FPV Antennas and Trans-Receivers, FPV Cameras, GPS Modules, PropellersAEROKART INDIA UAV FULL CARBON FIBRE FRAME V650 V.22
AEROKART INDIA UAV FRAME V650 V.22Â is being discontinued and will be replaced with the improved hexacopter drone, the Aurelia X4 Standard. Please read further on this page about all product upgrades.
- Built, Tested, and Configured Tarot 650 v2.2
- Carry Specialized Payloads With Ease
- Carry Up To 3.3 lb (1.5 kg) Payload UPTO.
- Up To 2Â mi (3.2 km) Range & 25 Minute Flight Time
- Powered By Open-Source Pixhawk & Ardupilot / PX4
- Can Be Customized Depending On Customer Requirements – Ask Us!
- Global International Shipping!
Looking for a larger option that carries more weight? Check out our Aurelia X6 Standard Ready To Fly, Aurelia X6 Pro Ready To Fly, or the largest drone with the largest payload capacity.
SKU: n/a -
Drone Parts, Flight Controller & Accessories
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
-49%
Drone Parts, Flight Controller & AccessoriesPixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
SKU: n/a -
Flight Controller & Accessories
OpenPilot CC3D EVO Flight Controller STM32 for RC Drone FPV Racing
-30%
Flight Controller & AccessoriesOpenPilot CC3D EVO Flight Controller STM32 for RC Drone FPV Racing
CC3D Flight Controller Hardware Features
Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac, and Linux.
Direct high-speed USB support with no drivers required, a truly plug-and-play device.
Spektrum satellite receiver support.
Futaba S-BUS hardware support.
Innovative Flexi-port technology for superior port flexibility.
4Mbits on-board EEPROM for configuration storage.Note: Please don’t flash/Update the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.
Software for configuration:Â Openpilot
You can also use Software for configuration:Â Librepilot
Flexiport
CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C
and a single serial port or dual serial ports, according to your connectivity needs.Superior user experience
OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally, for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with a bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.The OpenPilot project, whist still young, it trying to make Open Source much more user-friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!
Sensors and Components
3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500HzPackage included:
1 x CC3D EVO Flight Controller And CablesSKU: n/a
Reviews
There are no reviews yet