2%
Two Trees MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver

Two Trees MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver

₹609.00 Original price was: ₹609.00.₹599.00Current price is: ₹599.00.
In Stock
Add to wishlist Compare
Category:
    1. Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.

 

    1. All the signals are to-isolate which can protect your computer security.

 

    1. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.

 

    1. Wide input voltage range: 12-24V, and with anti-reverse function.

 

  1. One relay output control interface, accessed by the spindle motor or the air pump,

Description

    1. Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.

 

    1. All the signals are to-isolate which can protect your computer security.

 

    1. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.

 

    1. Wide input voltage range: 12-24V, and with anti-reverse function.

 

  1. One relay output control interface, accessed by the spindle motor or the air pump,
    1. Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.

 

    1. All the signals are to-isolate which can protect your computer security.

 

    1. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.

 

    1. Wide input voltage range: 12-24V, and with anti-reverse function.

 

  1. One relay output control interface, accessed by the spindle motor or the air pump,

Additional information

Weight 500 kg

Related products

1%
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Add to wishlist Compare

TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor

Original price was: ₹689.00.Current price is: ₹688.00.
    1. Driver Chip: TB6560AHQ
 
    1. Operating Voltage: 10-35V
 
    1. Nominal Voltage: 24V
 
    1. With the large heat sink to ensure good heat dissipation
 
  1. 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
Add to cart
1%
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
Add to wishlist Compare

3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model

Original price was: ₹550.00.Current price is: ₹549.00.
    1. Supply Voltage: 12V
 
    1. Standard interfaces (as that of the extruder)
 
    1. Reserved GCI like I2C and RS232
 
    1. 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
 
    1. Another 5A added to protect the component parts.
 
    1. An 11A fuse is added to the hotbed.
 
  1. Support 5 stepper drive board
Add to cart
8%
A4988 Stepper Motor Driver Controller Board- RED
Add to wishlist Compare

A4988 Stepper Motor Driver Controller Board- RED

Original price was: ₹139.00.Current price is: ₹129.00.
    1. Compact size, easy to install and use.
 
    1. All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
 
    1. Jm connection motor: Jv Connects 5V and 12V-24V Power Supply.
 
  1. E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
Add to cart
13%
MKS SBASE V1.3 32-bit Open Source Smoothieboard
Add to wishlist Compare

MKS SBASE V1.3 32-bit Open Source Smoothieboard

Original price was: ₹7,999.00.Current price is: ₹6,999.00.
    1. 32bit 100M Cortex-M3 MCU-LPC 1768
 
    1. High-performance
 
    1. Support highly modular open source firmware Smoothieware
 
    1. Easy for secondary development
 
  1.  Support network function, then proceed remote control via IE Explorer.
Add to cart
1%
Supply Voltage : 8-35 VDC. Current : 1.0A (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
Add to wishlist Compare

Supply Voltage : 8-35 VDC. Current : 1.0A (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.

Original price was: ₹130.00.Current price is: ₹129.00.
    1. Supply Voltage: 8.2 – 42 VDC.
 
    1. Current Capacity : 2.2A max(24V).
 
    1. Continuous current per phase: 1.5 A.
 
    1. Minimum Logic voltage: 2.5V.
 
    1. Maximum Logic Voltage: 5V.
 
    1. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
 
    1. Dimensions : 15 x 20 mm.
 
  1. Weight: 4 gm.
Add to cart
9%
Two Trees TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
Add to wishlist Compare

Two Trees TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis

Original price was: ₹490.00.Current price is: ₹449.00.
    1. Input Current: 0~5A
 
    1. Output Current: 0.5~4.0A
 
    1. Control Signal: 3.3~24V
 
    1. Power (MAX): 160W
 
    1. Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
 
    1. Temperature: -10～45℃
 
  1. H bridge bipolar constant current drive.
Add to cart
Shopping Cart
No products in the cart.