- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 60 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 3.6
- Stall Torque(kg-cm): 15
-32%
Motors | Drivers | Pumps | Actuators
60RPM 12V LOW NOISE DC MOTOR WITH METAL GEARS – GRADE A
- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 60 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 3.6
- Stall Torque(kg-cm): 15
₹419.00 ₹619.00
Based on 0 reviews
Be the first to review “60RPM 12V LOW NOISE DC MOTOR WITH METAL GEARS – GRADE A”
Related products
-
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
-30%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
- DC Motor – Voltage: 6V to 12V; RPM : 200; Torque Range: 5 Kg-cm
- Input supply voltage: 10V – 40VDC ; Max. Current: 10A
- 1. Connect your DC motor (or DC load) to the motor terminals as indicated. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer.
- Control power: 0.01~400W; Static current: 0.02 A (standby) PWM duty ratio:10%~100%; PWM frequency: 13 KHz
- Package include: 1 x 200 RPM DC Motor, 1 x 10A PWM
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA 3 Pcs MG90S Mini Digital Servo Motor With Metal Gears-180° Rotation-For RC Airplanes,Helicopters
-60%
Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 3 Pcs MG90S Mini Digital Servo Motor With Metal Gears-180° Rotation-For RC Airplanes,Helicopters
- Tiny and lightweight with high output power, this tiny MG90S servo is perfect for RC Airplane, Helicopter, Quadcopter or Robot.
- This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware.
- Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller.
- You can use any servo code, hardware or library to control these servos. Suit for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TOWER PRO 9G MICRO SERVO MOTOR
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck useFeatures:- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -10 to +60 Degree C
- Operating Speed (4.8V): 0.12sec/60 degrees at no load
- Operating Speed (6.0V): 0.10sec/60 degrees at no load
- Stall Torque (4.8V): 1.8kg/cm
- Stall Torque (6.0V): 2.4kg/cm
- 360 Modifiable: Yes
- Bearing Type: Ball Bearing
- Gear Type: Nylon Gears
- Connector Wire Length: 12″
- Dimensions: 22×11.5x27mm
- Weight: 11g
Package Content:
1 x TOWER PRO SG90 9G MICRO SERVO MOTOR
SKU: n/a -
Motors | Drivers | Pumps | Actuators
100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
-51%
Motors | Drivers | Pumps | Actuators100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
The 100RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a
There are no reviews yet.