MICRO-STEPPING STEPPER MOTOR DRIVE 20-80V 7.2AMP

Add to wishlist

Compare

Peak Current	SW1	SW2	SW3
2.40A	ON	ON	ON
3.08A	OFF	ON	ON
3.77A	ON	OFF	ON
4.45A	OFF	OFF	ON
5.14A	ON	ON	OFF
5.83A	OFF	ON	OFF
6.52A	ON	OFF	OFF
7.20A	OFF	OFF	OFF

Standstill Current Setting :

SW4 is used for standstill current setting. OFF mean s that the standstill current is half of the dynamic current ; and ON mean s that standstill current is the same as the selected dynamic current. Usually the SW4 is set to OFF, in order to reduce the heat of the motor and driver.

Switch Selection Table For Step Resolution setting:

Steps/Rev	SW5	SW6	SW7	SW8
400	OFF	ON	ON	ON
800	ON	OFF	ON	ON
1600	OFF	OFF	ON	ON
3200	ON	ON	OFF	ON
6400	OFF	ON	OFF	ON
12800	ON	OFF	OFF	ON
25600	OFF	OFF	OFF	ON
1000	ON	ON	ON	OFF
2000	OFF	ON	ON	OFF
4000	ON	OFF	ON	OFF
5000	OFF	OFF	ON	OFF
8000	ON	ON	OFF	OFF
10000	OFF	ON	OFF	OFF
20000	ON	OFF	OFF	OFF
25000	OFF	OFF	OFF	OFF

Package Includes:

1 x Rhino Micro-Stepping Stepper Motor Drive 20-80V 7.2Amp

₹2,482.00 ~~₹4,999.00~~

Compare

Description
Reviews

The RMCS-1105 is a new generation digital 2-phase stepper motor driver, based on a 32-bit DSP processor, combination of the anti-resonance, low noise, micro-step and
low temperature rise technology significantly improve the performance of the stepper motor, has low noise, small vibration, low temperature rise and high-speed torque.

The driver use online adaptive PID technology, without manual adjustment can be automatically generated optimal parameters for different motors, and achieve the best
performance.

Supply voltage range from VAC to 80VAC or from 24VDC to 110VDC, suitable for driving various 2-phase hybrid stepping motors which phase current below 7.2A.

The micro step can be set from full step to 51200steps/rev and the output current can be set form 2.4A to 7.2A; with automatic idle-current reduction, self-test, over voltage,under-voltage and over-current protection.

Categories: Batteries, Batteries | Chargers and Accessories