MOTOR
heavy
Showing all 14 results
-
Motors | Drivers | Pumps | Actuators
28HS51-0674JX5.18 NEMA11 1.2 Kg-cm Stepper Motor with Planetary Gearbox – D-Type Shaft
-20%
Motors | Drivers | Pumps | Actuators28HS51-0674JX5.18 NEMA11 1.2 Kg-cm Stepper Motor with Planetary Gearbox – D-Type Shaft
- Step Angle: 1.8°
- Holding Torque: 1.2 kg-cm
- Supply Current (A): 0.67
- Winding Type: Bipolar
- No. of Leads: 4
- Inductance: 7.3 mH/Phase
- Resistance: 9.2 Ω/phase
- Rotor Inertia: 18 gm-cm2
- Weight (gm): 272
- Shaft Diameter (mm): 6-(round side), 5-(flat side)
SKU: n/a -
Basic Electronic Components
Arduino Mega 2560 R3 Board
Arduino Mega 2560 R3 Board
The Arduino Mega 2560 R3 is a celebrated open-source microcontroller board, valued for its precision and versatility. Building on the Arduino Mega’s legacy, it employs the ATmega2560 SMD chip. Enhancements include SDA and SCL pins next to the AREF pin and two additional pins by the RESET pin. The IOREF pin allows shields to match the board’s voltage, and another reserved pin is provided for future upgrades.
With 54 digital input/output pins (15 supporting PWM output), 16 analog inputs, and 4 UARTs (hardware serial ports), the Mega 2560 R3 boasts a wide array of connectivity options. It also features a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button, offering full support for the microcontroller.
SKU: n/a -
ARM Microcontroller, AVR Development Board, Development Boards
Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development
-69%
ARM Microcontroller, AVR Development Board, Development BoardsCora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development
The Cora Z7 is our most cost-optimized SoC development board featuring the power and flexibility of AMD’s Zynq®-7000 SoC family.
Featuring Arduino™ headers, 1Gbps Ethernet, an onboard analog-to-digital converter, and Pmod ports, the Cora Z7 can be used in a variety of embedded applications. The Zynq-7000(S) SoC family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, delivering cost-optimized system integration. At such a friendly price point, the Cora Z7 is a great development board to get started with Zynq-based designs.
The Cora Z7 is supported by AMD’s Vivado ML, including the free Vivado ML Standard Edition. You can also interact with the processing system (PS) with AMD Vitis Unified Software Platform and PetaLinux Tools.
SKU: n/a -
Propellers
DIY Nano Drone Kit Pluto 1.2 – For Learning Stem & Tinkering, Crash Resistant, Smartphone Controlled, Rechargeable Battery By Drona Aviation, 16 Drone Programming Projects
-16%
PropellersDIY Nano Drone Kit Pluto 1.2 – For Learning Stem & Tinkering, Crash Resistant, Smartphone Controlled, Rechargeable Battery By Drona Aviation, 16 Drone Programming Projects
- Do-it-yourself (diy) – have fun building your drone. Spares available + open sourced designs
- Programmable: C++ based api structure makes it extremely easy to program (all codes open sourced)
- Fly with smartphone – start with simple alt hold + motion control mode and graduate to more difficult acrobatic flying levels. Flight Time: 9mins+
- Designed in IIT Bombay & made in India, it is extremely robust and can sustain multiple crashes
- Open-source learning content & drone projects to get you started
- Built-in Charger, Flight Time: 9mins+
SKU: n/a -
Basic Electronic Components
eSUN PA-CF 3D Printer filament 1.75mm 1Kg-Black
eSUN filaments are high-quality professional grade filaments and are compatible with all FDM printers such as MakerBot, Reprap, UP, Afinia, Flash Forge and all FDM 3D Printers.
eSUN PA-CF 3D Printer filament 1.75mm 1Kg-Natural is environmentally friendly, Nylon based, 20% carbon fibre filament to provide Printing smoothly, odorlessness, matte finish printing effect. It provides the High Strength, High Rigidity, Good Toughness, Wear-Resisting, fitting to the 3D printed object for the use of industrial parts as carbon fibre is known for.
Compared with Nylon, PA-CF has lower shrink rate and distortion, high accuracy without a warped edge.
Features:
- Environmentally friendly, Nylon based, 20% carbon fibre.
- Printing smoothly, odorless, matte finish.
- High Strength, High Rigidity, Good Toughness, Wear-Resisting, fitting to 3D print industrial parts.
- Compared with Nylon, it has lower shrink rate and distortion, high accuracy without a warped edge.
- Good flame resistance, Flame-retardant level: UL94-V2.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
NEMA34 PLANETARY GEARED STEPPER MOTOR 750KGCM
This is Nema34 Planetary Reducer 86mm stepper motor. The Input shaft is 14mm. Planetary reducer gearbox with a 1:10 gear ratio at rated torque of 500Kg.Motor Specifications:- Step Angle : 1.8 Degree
- Configuration: 4 wire bipolar stepper motor
- Phase current : 5Amp
- Resistance/phase: 0.76ohm
- Inductance/Phase : 8.5mH
- Rotor inertia: 2700 gcm2
- Shaft Dia : 12.7mm
- Shaft Length : 32mm
- Total Weight (Motor with Gearbox): 5.8 Kilograms
Gearbox Specifications:- Category : Planetary Gear Reducer
- Flange: 86mm Nema34
- Efficiency : 96%
- Speed Ratio : 1:10
- Noise : <45 DB
- Backlash : <15 Arcmin
- Gearbox height : 53mm
- Output Shaft Dia : 14mm (key shaft)
Wiring Details:- A+ = Red
- A- = Green
- B+ = Yellow
- B- = Blue
Package Includes:- 1 x NEMA34 PLANETARY GEARED STEPPER MOTOR 500KGCM
SKU: n/a -
Basic Electronic Components
Original Arduino Mega 2560 ATmega2560 MCU Rev3 A000067 Share:
Original Arduino Mega 2560 ATmega2560 MCU Rev3 A000067
This is an Original Arduino Mega board from Arduino Officials based on ATmega16U2. The Official Arduino Mega 2560 is a Rev3 development board based on the ATmega2560 microcontroller. The board has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with an AC to DC adaptor or battery to get started.
The Mega is compatible with most shields designed for the Arduino Uno, Duemilanove, or Diecimila. The Arduino Mega can be powered via a USB connection or with an external power supply. The power source is selected automatically. The Arduino Mega2560 has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers
SKU: n/a -
DIY Kits, DIY Learning and Robot Kits, Drone Parts
Quadcopter Drone DIY Kit – V1
- Built from quality glass fiber and polyamide nylon.
- Integrated PCB connections for direct soldering of your ESCs
- Pre-threaded brass sleeves for all of the frame bolts.
- Colored arms for orientation to keep you flying in the right direction.
- Large mounting tabs on main frame bottom plate for easy camera mounting.
- Easy assembly.
SKU: n/a -












