LIGHT
LIGHT
Showing 1–24 of 63 results
-
(ESC) Drone Speed Controller, Drone Parts
2-4S 20A x2 Dual Way Brushed ESC Speed Controller
l First make sure the forward and backward motors are in the same direction. (If a motor is turning incorrectly, exchange the +-stage wires behind the motor)
l Then adjust the direction, if it is not as expected, the remote control may be reversed, set it back
SKU: n/a -
DIY Kits, DIY Learning and Robot Kits
BLUETOOTH MODULE (HC05)
Product Description:
The HC-05 Bluetooth module serves as a versatile UART serial converter, allowing for seamless wireless data transmission via Bluetooth. Operating on the 2.4GHz ISM band, this module features integrated antenna technology and an edge connector for straightforward connectivity. It supports both master and slave configurations, making it flexible for various applications.
Key Features:
- Frequency Band: 2.4GHz ISM, ensuring robust wireless communication.
- Control: PIO control for easy integration.
- Antenna: Built-in antenna for reliable signal strength.
- Configuration: Capable of operating in both master and slave modes.
Package Includes:
- 1 x HC-05 Bluetooth Transceiver Module
SKU: n/a -
DIY Kits, DIY Learning and Robot Kits
Combo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino
-24%
DIY Kits, DIY Learning and Robot KitsCombo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino
- Wire Type: 40 pin Male to Male Jumper Wire
- Breadboard Power Supply Module
- Module: Compatible with 5V, 3.3V
- 9V battery clip connector
- Clip connector with 3.5mm jack
- 400 & 830-point half-size Solderless breadboard
SKU: n/a -
Basic Electronic Components, Development Boards
Digilent Cora Z7:Development Board, Cora Z7, Zynq-7000, ARM/FPGA SoC, USB, Ethernet
-61%
Basic Electronic Components, Development BoardsDigilent Cora Z7:Development Board, Cora Z7, Zynq-7000, ARM/FPGA SoC, USB, Ethernet
This is Digilent Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development Board.
The Cora Z7 is our most cost-optimized SoC development board featuring the power and flexibility of Xilinx’s Zynq®-7000 SoC family.
Featuring Arduino™ headers, 1Gbps Ethernet, an onboard analog-to-digital converter, and Pmod ports, the Cora Z7 can be used in a variety of embedded applications. The Zynq-7000(S) SoC family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, delivering cost-optimized system integration. At such a friendly price point, the Cora Z7 is a great development board to get started with Zynq-based designs.
The Cora Z7 is supported by Xilinx’s Vivado ML, including the free Vivado ML Standard Edition. You can also interact with the processing system (PS) with Xilinx’s Vitis Unified Software Platform and PetaLinux Tools.
The ARM Cortex™-A9 processor on the Cora Z7-07S is single-core.
410-370 is a Cora Z7 ready-to-use, most cost-optimized SoC development board featuring the power and flexibility of Xilinx’s Zynq®-7000 SoC family. The Zynq-7000 architecture tightly integrates a single or dual core 667MHz ARM Cortex-A9 processor with a Xilinx 7-series FPGA. This pairing grants the ability to surround the processor with a unique set of software-defined peripherals and controllers, tailored for the target application. The Cora Z7’s wide array of hardware interfaces, from a 1Gbps Ethernet PHY to analogue-to-digital converters and general-purpose input/output pins, make it an ideal platform for the development of a vast variety of embedded applications. The small form factor and mounting holes make the Cora Z7 ready to be used as one component of a larger solution. The on-board SD Card slot, Ethernet, and Power solution allow the Cora Z7 to operate independently of a host computer.
- 667MHz single-core Cortex-A9 processor
- FPGA programmable logic equivalent to Artix-7 FPGA
- DDR3 memory controller with 8 DMA channels and 4 high performance AXI3 server ports
- High/low bandwidth peripheral controllers, dual-channel, 1 MSPS internal ADC
- 512MB DDR3 with 16-bit bus at 525MHz (1050 MT/s) and microSD slot
- Powered from USB or any 4.5V-5.5V external power source
- USB and Ethernet connectivity
- Arduino/chipKIT Shield and two Pmod expansion connectors
- 14,400 LUTs, 28800 flip-flops, 66 DSP slices, 225KB block RAM, 2 clock management tiles
- Full support for Vivado and Petalinux design environments
SKU: n/a -
DIY Kits, DIY Learning and Robot Kits, Drone Parts
DIY DRONE KIT DM002 Mini DIY RC Drone Kit, Lightweight DIY Remote Controlled Drone Kit (Without Camera) 2.4G Mini Quadcopter Learning Drone Gift For Beginners
-10%
DIY Kits, DIY Learning and Robot Kits, Drone PartsDIY DRONE KIT DM002 Mini DIY RC Drone Kit, Lightweight DIY Remote Controlled Drone Kit (Without Camera) 2.4G Mini Quadcopter Learning Drone Gift For Beginners
Specifications:
- Operating Frequency: 2.4GHz
- Gyro: 6 Axis
- Flight Time: About 7 minutes
- Charging Time: About 60-80 minutes
- Remote Control Distance: About 100 meters
- Battery For Quadcopter: 3.7V 300mAh Lipo Battery
- Operating Environment: Indoor & Outdoor
Features:
- 2.4G remote control technology, high sensitivity and easy operation.
- Lightweight and easy to carry and play.
- A perfect gift for drone lovers and children.
SKU: n/a -
DIY Kits, DIY Learning and Robot Kits
DIY Drone Mini Toy Drone Aircraft with Remote Wooden Assembly Mini Drone Quadcopter
-23%
DIY Kits, DIY Learning and Robot KitsDIY Drone Mini Toy Drone Aircraft with Remote Wooden Assembly Mini Drone Quadcopter
This quadcopter kit is a DIY Drone, the majority of the pieces of this one-of-a-kind wooden Drone toy are made of wood! It’s cool, light, classic, and well-designed. Because this drone toy is a DIY aircraft, you can assemble all parts together to make your own mini drone.
Features:
Functions: Sideward flight, turn left/right, up/down, forward/backward, altitude hold, one key takeoff/landing, 3D flip, headless mode, one key returnWith attractive headless mode, completely solving pilot loss-of-orientation problems. Altitude hold: With a built-in barometer, the aircraft will fly to a certain height when taking off.One-key taking off/landing/stop makes the operation more convenient and it is very suitable for novice operation.With one key automatic return function, the plane can find its way home easily. SPECIFICATIONSMaterial WoodModel XYQ-2Drone Battery Li-Ion 600mAhRemote Control Battery Li-Ion 500mAhFlight Height <120mFrequency 2.4GHzSKU: n/a -
DIY Learning and Robot Kits, Drone Parts
DM002 Mini DIY RC Drone Kit, Lightweight DIY Remote Controlled Drone Kit (Camera) For Beginners
-45%
DIY Learning and Robot Kits, Drone PartsDM002 Mini DIY RC Drone Kit, Lightweight DIY Remote Controlled Drone Kit (Camera) For Beginners
DM002 RC Quadcopter is a great and inexpensive drone kit. You don’t need serious mechanical skills or even the ability to solder to put it together. It really is a great way to understand the components that go into a drone (hint: there is a lot less to them than you might think). When you are done putting it together, you’ll have an excellent quadcopter that is fun to fly. You’ll be hard-pressed to find a more inexpensive drone that performs as well as the DM002. The DM002 is a quick and nimble quadcopter that is fairly easy to fly.
1SKU: n/a -
DIY Kits, DIY Learning and Robot Kits, Drone Parts
DM002 Mini DIY RC Drone Kit, Lightweight DIY Remote Controlled Drone Kit (Without Camera) 2.4G Mini Quadcopter Learning Drone Gift For Beginners
-23%
DIY Kits, DIY Learning and Robot Kits, Drone PartsDM002 Mini DIY RC Drone Kit, Lightweight DIY Remote Controlled Drone Kit (Without Camera) 2.4G Mini Quadcopter Learning Drone Gift For Beginners
Specifications:
- Operating Frequency: 2.4GHz
- Gyro: 6 Axis
- Flight Time: About 7 minutes
- Charging Time: About 60-80 minutes
- Remote Control Distance: About 100 meters
- Battery For Quadcopter: 3.7V 300mAh Lipo Battery
- Operating Environment: Indoor & Outdoor
Features:
- 2.4G remote control technology, high sensitivity and easy operation.
- Lightweight and easy to carry and play.
- A perfect gift for drone lovers and children.
SKU: n/a -
DIY Kits, DIY Learning and Robot Kits, DRONE COMBO, Drone Kit
DM002HW DIY Drone with Camera 2.4GHz, 4 Channels.
-21%
DIY Kits, DIY Learning and Robot Kits, DRONE COMBO, Drone KitDM002HW DIY Drone with Camera 2.4GHz, 4 Channels.
Specifications:
- Frequency: 2.4GHz
- Camera: 0.3MP 480P
- Gyro: 6 axis
- Night Flight: Yes
- Flight time: Around 7 minutes
- Charging time: About 60-80 minutes
- Remote Control Distance: About 100 Meters
- Battery For Quadcopter: 3.7V 300mAh Lipo Battery (included)
- Operating environment: Indoor & Outdoor
SKU: AERO9892 -
Basic Electronic Components
eSun 1.75mm eASA 3D Printing Filament 1kg-Black
Print Settings
- Best print temperature: 220-260℃
- Feed rate: 20-90mm/s
- Idling speed: 90-150mm/s
- Set your print bed temperature to approximately 90°C – 110°C. (if possible cool the bed down by about 10-20°C after the first couple of layers)
- ASA printed at high temperatures will make the final product extra strong.
- Sticks to Kapton Tape, ABS Juice (scrap ABS filament dissolved in acetone), or extra strong hairspray on clean glass.
- A fully enclosed printer is recommended if possible, to help keep some heat in while printing with ASA.
- Works well with HIPS support material.
Features:
- Excellent mechanical physical property
- Weather-resistant, high temperature resistant and excellent UV resistant
- Anti-static material.
SKU: n/a -
Basic Electronic Components
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Blue
This is a eSun ABS+ 1.75mm 3D Printing Filament 1kg-Blue.
eSun ABS+ is an upgrade to normal ABS. It is suitable for all 3D printers and can replace ABS completely. The material is made entirely from corn grain, suitable for printing of larger objects and stringing problems are from the past with ABS+.
We zbotic.in offering a variety of colors from the eSun ABS+ assortment. Experience a smoother 3D print experience with this great material. This new ABS+ is tougher than regular ABS and demonstrates much less warping
Features:
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: n/a -
Basic Electronic Components
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Green
eSun ABS+ is an upgrade to normal ABS. It is suitable for all 3D printers and can replace ABS completely. The material is made entirely from corn grain, suitable for printing of larger objects and stringing problems are from the past with ABS+.
We zbotic.in offering a variety of colors from the eSun ABS+ assortment. Experience a smoother 3D print experience with this eSun ABS+ 1.75mm 3D Printing Filament 1kg-Green material. This new ABS+ is tougher than regular ABS and demonstrates much less warping
Features:
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: n/a -
Basic Electronic Components
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Red
This is eSun ABS+ 1.75mm 3D Printing Filament 1kg-Red.
eSun ABS+ is an upgrade to normal ABS. It is suitable for all 3D printers and can replace ABS completely. The material is made entirely from corn grain, suitable for printing of larger objects and stringing problems are from the past with ABS+.
We at zbotic.in offering a variety of colors from the eSun ABS+ assortment. Experience a smoother 3D print experience with this great material. This new ABS+ is tougher than regular ABS and demonstrates much less warping
Features:
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: n/a -
Basic Electronic Components
eSun ABS+ 1.75mm 3D Printing Filament 1kg-White
eSun ABS+ is an upgrade to normal ABS. It is suitable for all 3D printers and can replace ABS completely. The material is made entirely from corn grain, suitable for printing of larger objects and stringing problems are from the past with ABS+.
We zbotic.in offering a variety of colors from the eSun ABS+ assortment. Experience a smoother 3D print experience with this great material. This new ABS+ is tougher than regular ABS and demonstrates much less warping
Features:
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: n/a
















