-
DIY Kits, DRONE COMBO, Drone Parts
Drone combo kit (4 x Motor, 4 x ESC, 2 x 1045 Propeller, 1 x F450 Frame)
-5%
DIY Kits, DRONE COMBO, Drone PartsDrone combo kit (4 x Motor, 4 x ESC, 2 x 1045 Propeller, 1 x F450 Frame)
Features:
- 4 high-performance motors for reliable and powerful flight
- 4 electronic speed controllers (ESC) for precise control and stability
- 2 durable 1045 propellers for efficient propulsion
- 1 lightweight yet sturdy F450 frame for easy assembly
SKU: n/a -
Flight Controller & Accessories
Pixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality (Copy)
-41%
Flight Controller & AccessoriesPixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality (Copy)
Characteristics:
- Compatible with Alexmos2.2 or firmware below, compatible with the newest firmware BruGi_050 German, standard Russian2.2 firmwareTips
- A new generation of strong input control 32-bit processor, a circuit board with PX4FMU + PX4IO
Specifications:
- 32-bit Pixhawk PX4 Autopilot Open Code Flight Controller V2.4.8
- 2 bit 1.32 STM32F427 flash Cortex M4, with the floating-point hardware processing unit
- 2 main frequency: 256 K, RAM 168 MHZ
- 32-bit processor STM32F103 backup co
Sensors:
- L3GD20 3-axis 16-bit digital gyroscope
- LSM303D 14/3 Axis Accelerometer Magnetometer
- MPU6000 6-axis accelerometer / magnetometer
- MS5611 high precision barometer
Interface:
- 5 UART 1 High Voltage compatible, 2 with hardware flow control
- 2 CAN
- DSM / DSM-X Spektrum compatible satellite receiver input
- SBUS input and output compatible
- PPM signal input
- RSSI (PWM or input voltage)
- I2C
- SPI
- 3.3 and 6.6 VADC inputs
- external US MICRO
Package includes:
1 X 2.4.8 Pixhawk main control with shell
1 X Safety switch
1 X Buzzer
1 X Memory Card
Connection Wire
SKU: n/a -
Drone Frame and Accessories, Drone Parts, Propellers
MADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India (Copy)
-28%
Drone Frame and Accessories, Drone Parts, PropellersMADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India (Copy)
1. 10-inch Diameter with 5 Pitch for optimal balance between thrust and efficiency
2. Tri-Blade Design for increased thrust, stability and rigidity
3. Made from Glass Fibre Reinforced Nylon for superior durability and performance
4. Lightweight Build – only 23 gm +- 5%, reduces load on motors
5. 18 mm Hub Diameter, 9 mm Hub Thickness and 5 mm Shaft CompatibilitySKU: n/a -
Drone Kit
Bonka 11.1V 1500mAh 35C 3S LiPo Battery High-Performance Lithium Polymer Battery With 35C Discharge Rate For RC Applications
-25%
Drone KitBonka 11.1V 1500mAh 35C 3S LiPo Battery High-Performance Lithium Polymer Battery With 35C Discharge Rate For RC Applications
Description:
Bonka lithium batteries are the powerhouse behind high-performance radio-controlled vehicles. Specifically engineered for the intense demands of FPV drones, RC cars, airplanes, helicopters, and multi-rotors, Bonka delivers unmatched quality and efficiency. Their reputation rests on the ability to unleash explosive power through high discharge rates, sustain peak performance with ample capacities, and ensure consistent, reliable energy delivery via meticulously assembled packs.
All this is achieved through cutting-edge manufacturing, cementing Bonka’s status as a premier choice for those who demand precision and power.
Specifications:
- Voltage: 11.1V
- Configuration: 3S
- Capacity: 4200mAh
- Discharge Rate: 35C
Features:
- Small and light design.
- Fast discharge capability.
- Engineered for performance.
- Maximized energy density.
- For drones, RC, and electronics
Package Included:
1 x Bonka 11.1V 1500mAh 35C 3S Lithium Polymer Battery
SKU: n/a -
(ESC) Drone Speed Controller
BLS-MAX BLHeli Series 30A ESC with Oneshot
Based on BL Heli firmware, further optimized to the perfect drive performance.
Low-voltage protection, over-heat protection, and throttle signal loss protection.
Separate power supply for MCU and BEC, enhBased on BL Heli firmware, further optimized to the perfect drive performance.
Low-voltage protection, over-heat protection, and throttle signal loss protection.
Separate power supply for MCU and BEC, 1277enhancing the ESCs ability to eliminate magnetic interference.
Parameters of the ESC can be set via a program card or transmitter.
Throttle range can be set to be compatible with different receivers.
Equipped with built-in linear BEC or switch BEC.
Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.
ancing the ESCs ability to eliminate magnetic interference.
Parameters of the ESC can be set via a program card or transmitter.
Throttle range can be set to be compatible with different receivers.
Equipped with built-in linear BEC or switch BEC.
Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.SKU: n/a -
DIY Kits, Drone Accessories, Drone Parts
Radiolink Crossflight Flight Controller With TS100 GPS F550 hexacopter Advance Drone Kit
-34%
DIY Kits, Drone Accessories, Drone PartsRadiolink Crossflight Flight Controller With TS100 GPS F550 hexacopter Advance Drone Kit
1.F550 Hexacopter Drone Frame With Integrated
2.1000KV A2212/13T Brushless Motor With Bullet Connector
3.1045 ABS Black HD Propellers 1CW+1CCW
4.Favorite LittleBee 30A 2 – 6S D Shot ESC For
5.Radiolink CrossFlight Flight Controller
6.CC3D Shock Absorber
7.Radiolink TS100 Mini GPS
SKU: n/a -
DIY Kits, DIY Learning and Robot Kits, Drone Parts, FPV Cameras
RunCam Phoenix 2 SP 1500TVL Starlight Night Camera 128 FOV Freestyle Camera Wide Dynamic Camera FPV
-24%
DIY Kits, DIY Learning and Robot Kits, Drone Parts, FPV CamerasRunCam Phoenix 2 SP 1500TVL Starlight Night Camera 128 FOV Freestyle Camera Wide Dynamic Camera FPV
private moldYesmodel numberRunCam Phoenix 2 SP1500TVL Starlight Night CameraProduct nameRunCam Phoenix 2 SP1500TVL Starlight Night CameraImage sensor1/2.8″ Starlight COMS SensorHorizontal Resolution1500TVLcamera Dimensions19*19*27mmScreen Format4:3 /16:9Signal SystemNTSC/PALSensitivity15000mV/LuxesecWDRGlobal WDRPower5-36vWeight76gSKU: n/a -
Development Boards, DIY Learning and Robot Kits, Drone Frame and Accessories
DIY F450 Carbon Fiber Quadcopter Frame Kit With APM2.8 Flight Control M7N GPS 30A ESC 2212 920KV Motor RC Training Drones
-4%
Development Boards, DIY Learning and Robot Kits, Drone Frame and AccessoriesDIY F450 Carbon Fiber Quadcopter Frame Kit With APM2.8 Flight Control M7N GPS 30A ESC 2212 920KV Motor RC Training Drones
1.model number F450
2.motor 2212 920KV *4pcs (ready to sky )3.flight controlAPM2.84. battery 5200 mah 3s5.remoteI66.ESC 30A*4pcs(color may vary )7.GPS M7 N GPS8.ESC30A*4pcs9.voltage tester10 Apm power module11. Gift may vary as per the availability .SKU: n/a -
-
Flight Controller & Accessories, Uncategorized
Made in India Daspilot flight controller
- Radio Input : PPM Signal
- 4 x Motor Out 1000-2000us 250hz Refresh Rate
- Dedicated Radio Calibration button
- Dedicated ESC Calibration Button
- Dedicated Accelerometer Calibration Button
- RGB LED Indicator
- Flight mode: self level
- Input Voltage: 5V (ch1)
- Max Roll Angle: 28 deg, Max Pitch Angle: 28 deg, Max Yaw Rate: 150 deg/s
- Weight : 25 grams
SKU: n/a -
-
DRONE COMBO, Flight Controller & Accessories
Pixhawk PX4 Autopilot 2.4.8 32 Bit Flight Controller kit With Telemetry and GPSv
-32%
DRONE COMBO, Flight Controller & AccessoriesPixhawk PX4 Autopilot 2.4.8 32 Bit Flight Controller kit With Telemetry and GPSv
1 x Pixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality
1 x GPS Module Ublox NEO-7M With Electronic Compass for Apm/Pixhawk
1 x 3DR 100mW Radio Telemetry 433MHZ For APM PX4 Pixhawk
1 x Plastic GPS stand Antenna Foldable Mount Holder
SKU: n/a -
Drone Frame and Accessories, Drone Parts, Propellers
MADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India
-28%Drone Frame and Accessories, Drone Parts, PropellersMADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India
1. 10-inch Diameter with 5 Pitch for optimal balance between thrust and efficiency
2. Tri-Blade Design for increased thrust, stability and rigidity
3. Made from Glass Fibre Reinforced Nylon for superior durability and performance
4. Lightweight Build – only 23 gm +- 5%, reduces load on motors
5. 18 mm Hub Diameter, 9 mm Hub Thickness and 5 mm Shaft CompatibilitySKU: n/a -
DIY Kits, DIY Learning and Robot Kits
Combo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino
-24%
DIY Kits, DIY Learning and Robot KitsCombo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino
- Wire Type: 40 pin Male to Male Jumper Wire
- Breadboard Power Supply Module
- Module: Compatible with 5V, 3.3V
- 9V battery clip connector
- Clip connector with 3.5mm jack
- 400 & 830-point half-size Solderless breadboard
SKU: n/a -
Uncategorized
Intel® RealSense™ Depth Camera D435IF
Model Depth Camera D435if Features Use environment: Indoor/Outdoor Ideal Range: .3 m to 3 m Depth Depth technology: Stereoscopic Minimum Depth Distance (Min-Z) at Max Resolution: ~28 cm Depth Accuracy: <2% at 2 m(2) Image sensor technology: Global Shutter Depth Field of View (FOV): 87° × 58°(1) Depth output resolution: Up to 1280 × 720 Depth frame rate: Up to 90 fps Filter Depth Filter IR Pass RGB Filter IR Cut RGB RGB frame resolution: Up to 1920 × 1080 RGB frame rate: 30 fps RGB sensor technology: Rolling Shutter RGB sensor FOV (H × V): 69 × 42°(1) RGB sensor resolution 2 MP Major Components Camera module: Intel RealSense Module D430 + RGB Camera Vision Processor Board: Intel RealSense Vision Processor D4 Physical Form factor: Camera Peripheral Connectors: USB‑C* 3.1 Gen 1* Length × Depth × Height: 90 mm × 25.8 mm × 25 mm Mounting mechanism:
- One 1/4‑20 UNC thread mounting point
- Two M4 thread mounting points
SKU: n/a -
-
ARM Microcontroller, AVR Development Board, Development Boards
Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development
-69%
ARM Microcontroller, AVR Development Board, Development BoardsCora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development
The Cora Z7 is our most cost-optimized SoC development board featuring the power and flexibility of AMD’s Zynq®-7000 SoC family.
Featuring Arduino™ headers, 1Gbps Ethernet, an onboard analog-to-digital converter, and Pmod ports, the Cora Z7 can be used in a variety of embedded applications. The Zynq-7000(S) SoC family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, delivering cost-optimized system integration. At such a friendly price point, the Cora Z7 is a great development board to get started with Zynq-based designs.
The Cora Z7 is supported by AMD’s Vivado ML, including the free Vivado ML Standard Edition. You can also interact with the processing system (PS) with AMD Vitis Unified Software Platform and PetaLinux Tools.
SKU: n/a -
DRONE COMBO, Drone Kit, Drone Parts
Premium Hexacopter Drone Combo Set with Pixhawk For Flower Dropping Drone
-38%
DRONE COMBO, Drone Kit, Drone PartsPremium Hexacopter Drone Combo Set with Pixhawk For Flower Dropping Drone
1 x Pixhawk 2.4.8 Flight controller with accessories
1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver for RC FPV Drone
1 x DJI F550 Frame
1 x Landing Gear
6 x Readytosky 920kv motor(3cw + 3ccw)
6 x BLHeli LittleBee 30A ESC (OPTO) 2-6SLipo
1 x power module for Pixhawk
1 x Ubolx neo M8N gps
1 x GPS stand|
3 x 1045 Carbon fiber propeller
1 x Mg996 metal gear servo
1 x Lm2596 power supply for servo
1 x Shock absorberSKU: n/a -
DRONE COMBO, Drone Kit, Drone Parts
FPV DRONE KIT Kit with Crossflight
1 x QAV250 V2 Carbon Fiber Frame
1 xFlySky FS-i6 Transmitter
4 x BLHeli LittleBee 30A ESC
4 x Readytosky 2205 2300KV Brushless Motors ( 2 CW – 2 CCW )
4 x 5045 3-Blade Propellers
1 x Radiolink crossflight Flight Controller
1 x Readytosky 20cm Nylon Strap Belt for RC Lipo Battery
1 x Shock Absorber Set
SKU: n/a -
Uncategorized
Quadcopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
-15%
UncategorizedQuadcopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
1 x Pixhawk Flight controller board
1 x DJI F450 Quadcopter Frame Kit
4 x A2212 1000KV Brushless Motor For RC Airplane / Quadcopter
4 x 30A Brushless ESC
2 x 1045 Propeller 10in 10×4.5 For Drone
1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver
1 x APM Pixhawk Power Module with XT60
1 x Nylon Strap Belt for RC Lipo Battery
1 x 3D printed Shock Absorber Anti-vibration Set for APM Pixhawk
SKU: n/a -
Basic Electronic Components
ADS1231IDR – 24-Bit 80SPS 1-Ch Delta-Sigma ADC IC
The ADS1231IDR – 24-Bit 80SPS 1-Ch Delta-Sigma ADC IC in an SOIC package offers precise analog-to-digital conversion with a resolution of 24 bits and a sampling rate of 80 samples per second (S/s). It operates with an input range of 3V to 5.3V, providing low power consumption of just 5mW. This ADC features a bipolar polarity and interfaces via SPI. It is designed for use in applications requiring high-resolution conversion, such as in measurement and control systems. The device is lead-free, RoHS compliant, and has a maximum operating temperature of 85°C and a minimum operating temperature of -40°C.
Features :
Resolution: 24 bits for high-precision conversion.
Sampling Rate: 80 samples per second (S/s).
Interface: SPI (Serial Peripheral Interface).
Operating Voltage: 3V to 5.3V, with a nominal supply of 5V.
Low Power: Power consumption of 5 mW.
Temperature Range: -40°C to 85°C.SKU: n/a -
Basic Electronic Components
MCP3208-CI/P-MICROCHIP-MCP3208-CI/P-Analogue to Digital Converter, 12 bit, 100 kSPS, Pseudo Differential, Single Ended, Serial, SPI
-57%
Basic Electronic ComponentsMCP3208-CI/P-MICROCHIP-MCP3208-CI/P-Analogue to Digital Converter, 12 bit, 100 kSPS, Pseudo Differential, Single Ended, Serial, SPI
The MCP3208-CI/P is an 8 channel, 12bit Analogue to Digital Converter (ADC) with SPI interface in 16 pin DIP package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3208 features successive approximation register (SAR) architecture with onboard sample and hold circuitry allowing 12bit ADC capability to be added to any PIC microcontroller. It is programmable to provide four pseudo differential input pairs or eight single ended inputs. Differential nonlinearity (DNL) is specified at ±1LSB and integral nonlinearity (INL) is ±2LSB. Communication with devices is accomplished using simple serial interface compatible with SPI protocol. Low current design permits operation with typical standby and active currents of only 500nA (2μA maximum) and 320μA (400μA maximum) respectively.
Specifications:
Operating Temperature Min: -40°C
No. of Pins: 16Pins
Product Range: Octal 12-Bit SAR ADCs
Operating Temperature Max: 85°C
Supply Voltage Min: 2.7V
Supply Voltage Max: 5.5V
ADC / DAC Case Style: DIP
Data Interface: Serial, SPI
Sampling Rate: 100kSPS
Supply Voltage Type: Single
Resolution (Bits): 12bit
Input Channel Type: Pseudo Differential, Single EndedSKU: n/a -
Basic Electronic Components
MIC2288YD5-TR-MICROCHIP-DC-DC Switching Boost (Step Up) Regulator, Adjustable, 2.5V-10Vin, 3.6V-34Vout, 1Aout, SOT-23-5
-61%
Basic Electronic ComponentsMIC2288YD5-TR-MICROCHIP-DC-DC Switching Boost (Step Up) Regulator, Adjustable, 2.5V-10Vin, 3.6V-34Vout, 1Aout, SOT-23-5
The MIC2288YD5 TR is a 1A 1.2MHz PWM Boost Converter in low-profile. It implements a constant frequency, current mode control scheme with internal compensation that offers excellent transient response and output regulation performance. The high frequency operation saves board space by allowing small and external components. The fixed frequency PWM topology also reduces spurious switching noise and ripple to the input power source.
Features:
- Stable with ceramic capacitors
- High efficiency
- low input and output ripple
- Output over voltage protection
- Over-temperature shutdown
- -40 to 125°C Junction temperature range
SKU: n/a -
Basic Electronic Components
MCP3202-BI/P 12-Bit Dual Channel A/D Converter (ADC) with SPI Interface IC DIP-8 Package
-60%
Basic Electronic ComponentsMCP3202-BI/P 12-Bit Dual Channel A/D Converter (ADC) with SPI Interface IC DIP-8 Package
The MCP3202-BI/P 12-Bit P is a 12-bit analog-to-digital converter (ADC) with SPI serial interface and on-board sample-and-hold circuitry. It is designed for applications such as sensor interface, process control, and data acquisition, especially in battery-operated systems. The MCP3202-BI/P 12-Bit offers programmable analog inputs, allowing for either single-ended or pseudo-differential pairs. It operates over a wide voltage range and offers a low-power design for efficient performance.
Features :
- Single-ended or pseudo-differential inputs
- On-chip sample-and-hold
- Low power consumption: Standby current 0.5µA
- Operating voltage range: 2.7V to 5.5V
- Throughput rate: Up to 100 ksps
- Gain error: ±1.25 LSB (typical)
- Operating temperature: -40°C to +85°C
SKU: n/a -
Basic Electronic Components
MCP3421A0T-E/CH – 18-Bit Analog-to-Digital Converter I2C Interface On-Board Reference 6pin SOT-23 Microchip Technology
-51%
Basic Electronic ComponentsMCP3421A0T-E/CH – 18-Bit Analog-to-Digital Converter I2C Interface On-Board Reference 6pin SOT-23 Microchip Technology
the Microchip Technology MCP3421A0T ADC in an SOT-23 package is an 18-bit analog-to-digital converter designed for low-power applications. With a single channel and 3.75 S/s sampling rate, this device operates with a reference voltage of 2.048 V and supports I2C/serial/2-wire interfaces. It operates within a 2.7V to 5.5V supply range, consumes only 155 µA of current, and has an operating temperature range from -40°C to 125°C.
Features :
Resolution: 18 bits
Channels: 1
Interface: I2C, Serial, 2-Wire
Supply Voltage: 2.7V to 5.5V
Reference Voltage: 2.048V
Power Consumption: 155 µA
Sampling Rate: 3.75 S/s
Operating Temp Range: -40°C to 125°CSKU: n/a -
Basic Electronic Components
TC7660SCOA-MICROCHIP-DC/DC Inductorless Adjustable Inverter, 1.5 V to 12 V in, -12 V to -1.5 V/20 mA out, SOIC-8
-46%
Basic Electronic ComponentsTC7660SCOA-MICROCHIP-DC/DC Inductorless Adjustable Inverter, 1.5 V to 12 V in, -12 V to -1.5 V/20 mA out, SOIC-8
The TC7660S device is a pin-compatible replacement for the industry standard 7660 charge pump voltage converter. It converts a +1.5V to +12V input to a corresponding -1.5V to -12V output using only two low-cost capacitors, eliminating inductors and their associated cost, size, and electromagnetic interference (EMI). Added features include an extended supply range to 12V, and a frequency boost pin for higher operating frequency, allowing the use of smaller external capacitors.
The onboard oscillator operates at a nominal frequency of 10 kHz. Frequency is increased to 45 kHz when pin 1 is connected to V+. Operation below 10 kHz (for lower supply current applications) is possible by connecting an external capacitor from OSC to the ground (with pin 1 open). The TC7660S is available in 8-pin PDIP and 8-pin Small Outline (SOIC) packages in commercial and extended temperature ranges.Applications:
- RS-232 Negative Power Supply
- Simple Conversion of +5V to ±5V Supplies
- Voltage Multiplication VOUT = ± n V+
- Negative Supplies for Data Acquisition Systems
and Instrumentation
SKU: n/a -
Basic Electronic Components
MAX31855KASA+T – 1-Ch 14bits Thermocouple-to-Digital Converter SPI Remote Sensor IC SMD-8 Package
-62%
Basic Electronic ComponentsMAX31855KASA+T – 1-Ch 14bits Thermocouple-to-Digital Converter SPI Remote Sensor IC SMD-8 Package
The MAX31855KASA+T – 1-Ch 14bits Thermocouple-to-Digital Converter SPI Remote Sensor IC SMD-8 Package is a compact, low-power device designed for digital signal processing. It operates with a 3 V to 3.6 V supply voltage and consumes a low operating current of 900 µA at 3.3 V. With a 14-bit resolution, this device is ideal for applications requiring precise data conversion. It features a digital output type and is housed in an 8-pin SO package. The device operates across a wide temperature range of -40°C to 125°C
Features :
- Interface: SPI
- Resolution: 14 bits
- Operating Voltage: 3 V to 3.6 V
- Operating Current: 900 µA
- Max Operating Temperature: 125°C
SKU: n/a -
Basic Electronic Components
ADS1110A0IDBVT-TEXAS INSTRUMENTS-Analogue to Digital Converter, 16 bit, 240 SPS, Differential, Single Ended, I2C, Single, 2.7 V
-49%
Basic Electronic ComponentsADS1110A0IDBVT-TEXAS INSTRUMENTS-Analogue to Digital Converter, 16 bit, 240 SPS, Differential, Single Ended, I2C, Single, 2.7 V
Features:
- 2.048V ±0.05% Accuracy
- 5ppm/°C Drift
- Onboard PGA
- Onboard oscillator
- 16-bits No missing codes
- 0.01% FSR Maximum INL
- Continuous self-calibration
- Single-cycle conversion
- 15 to 240SPS Programmable data rate
- I²C Interface, 8 available addresses
- 240µA Low current consumption
- No. of Pins: 6Pins
- Operating Temperature Min: -40°C
- Operating Temperature Max: 85°C
- Product Range: Single 16-Bit Sigma-Delta ADC
SKU: n/a -
Basic Electronic Components
MCP3201-CI/P 12-Bit A/D Converter (ADC) with SPI Interface IC DIP-8 Package
-62%
Basic Electronic ComponentsMCP3201-CI/P 12-Bit A/D Converter (ADC) with SPI Interface IC DIP-8 Package
The MCP3201-CI/P 12-Bit A/D Converter analog-to-digital converter (ADC) designed for precision measurement applications. Featuring an on-board sample and hold circuit, it allows for accurate conversions from a single-ended input. This ADC supports SPI communication for easy integration with microcontrollers, providing a sampling rate of up to 100 ksps at a clock rate of 1.6 MHz. With a wide operating voltage range of 2.7V to 5.5V, it ensures flexibility for various power supply setups. The device is optimized for low power, consuming only 500nA in standby mode and 300μA during active conversion, making it ideal for battery-powered and low-energy applications
Features :
12-bit Resolution: Provides high accuracy in analog-to-digital conversions.
On-chip Sample and Hold: Captures and holds the input signal for accurate conversions.
Single-Ended Input: Supports single-ended analog inputs for flexibility.
SPI Communication: Easy integration with microcontrollers via SPI interface.
Sampling Rate: Up to 100 ksps at 1.6 MHz clockSKU: n/a -
Basic Electronic Components
MCP4802-E/P 8 Bit Dual Voltage Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
-61%
Basic Electronic ComponentsMCP4802-E/P 8 Bit Dual Voltage Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
The MCP4802 device is dual 8-bit, 10-bit and 12-bit buffered voltage output Digital-to-Analog Converters (DACs), respectively. The devices operate from a single 2.7V to 5.5V supply with SPI-compatible Serial Peripheral Interface.
The device has a high precision internal voltage reference (VREF = 2.048V). The user can configure the full-scale range of the device to be 2.048V or 4.096V by setting the Gain Selection Option bit (gain of 1 of 2). Each DAC channel can be operated in Active or Shutdown mode individually by setting the Configuration register bits. In Shutdown mode, most of the internal circuits in the shutdown channel are turned off for power savings, and the output amplifier is configured to present a known high resistance output load. The devices include double-buffered registers, allowing synchronous updates of two DAC outputs using the LDAC pin. These devices also incorporate a Power-on Reset (POR) circuit to ensure reliable powerup. The devices utilize a resistive string architecture, with its inherent advantages of low DNL error, low ratiometric temperature coefficient, and fast settling time. These devices are specified over the extended temperature range (+125°C).
The device provides high accuracy and low noise performance for consumer and industrial applications where calibration or compensation of signals (such as temperature, pressure, and humidity) are required. The MCP4802/4812/4822 devices are available in the PDIP, SOIC, and MSOP packages.
Application:
- SetPoint or Offset Trimming
- Sensor Calibration
- Precision Selectable Voltage Reference
- Portable Instrumentation (Battery-Powered)
- Calibration of Optical Communication Devices
SKU: n/a -
Basic Electronic Components
MT8870 IC – DTMF Decoder IC
The MT8870 IC – DTMF Decoder is a high-performance DTMF receiver IC that can decode Dual-Tone Multi-Frequency signals into a 4-bit binary code. This IC is widely used in telephone dialing systems, automated phone systems, and remote control applications where DTMF signaling is employed. The SMD SOIC-18 package provides a compact and surface-mountable form factor ideal for modern electronic designs.
Features :
- DTMF Signal Decoding: Decodes 16 DTMF tones into a 4-bit binary output.
- High Noise Immunity: Offers reliable performance in noisy environments.
- Integrated Filters: Includes internal bandpass filters for signal conditioning.
- Power-On Reset: Ensures reliable initialization upon power-up.
- Low Power Consumption: Designed for low power operation.
- Programmable Tone Duration: Can be configured for different time intervals.
SKU: n/a -
Basic Electronic Components
TXB0104D Voltage Level Translator Bidirectional, 0.02 mA ns 100 Mbps
-53%
Basic Electronic ComponentsTXB0104D Voltage Level Translator Bidirectional, 0.02 mA ns 100 Mbps
This TXB0104D 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5- V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA must not exceed VCCB. When the OE input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE must be tied to GND through a pulldown resistor The current sourcing capability of the driver determines the minimum value of the resistor. The TXB0104D device is designed so the OE input circuit is supplied by VCCA. This device is fully specified for partial power- down applications using I OFF. The I OFF circuitry disables the outputs, which prevents damaging current back-flow through the device when the device
is powered down.SKU: n/a
Skip to navigation
Skip to content
