Development Boards
Showing 241–264 of 269 results
-
Development Boards
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
- 5V power supplied by a USB connector
- USB 2.0 full speed compatible interface
- USB standard A to mini B cable
- 1.65V to 5.5V application voltage supported on SWIM interface
- SWIM low speed and high-speed modes supported
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32 Nucleo-64 MCU, Arduino Uno V3 Connectivity, Flexible Power Supply
-21%
Development BoardsSTMICROELECTRONICS Development Board, STM32 Nucleo-64 MCU, Arduino Uno V3 Connectivity, Flexible Power Supply
- Model: STM32 Nucleo-64 MCU
- STM32 microcontroller with LQFP64 package
- USB re-enumeration capability – Three different interfaces
- Voltage: 3.3V, 5V, 7 – 12V
- Applications: Embedded Design & Development
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32F091RC MCU, mbed Enabled, Arduino Uno V3 and ST Morpho Connectivity
-6%
Development BoardsSTMICROELECTRONICS Development Board, STM32F091RC MCU, mbed Enabled, Arduino Uno V3 and ST Morpho Connectivity
- Model: STM32F091RC MCU
- Flexible board power supply: USB VBUS or external source (3.3 V, 5 V, 7 – 12 V)
- Supported by wide choice of Integrated Development Environments (IDEs) including IAR , Keil , GCC-based IDEs
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector.
- Low power consumption
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32F302R8T6 MCU, On Board Debugger, Arduino Uno Compatible
-19%
Development BoardsSTMICROELECTRONICS Development Board, STM32F302R8T6 MCU, On Board Debugger, Arduino Uno Compatible
- Model: STM32F302R8T6 MCU
- Voltage: 3.3V, 5V, 7-12V
- Two push buttons for user and reset
- Three interfaces supported on USB. Virtual Com port, Mass storage and Debug port
- STM32 comprehensive software HAL library
- Supported by Integrated Development Environments (IDEs) including IAR, Keil, GCC based IDEs
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho
-20%
Development BoardsSTMICROELECTRONICS Development Board, STM32F410RB Nucleo-64 MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino/ST morpho
- USB VBUS or external source (3.3V, 5V, 7 to 12V) and power management access point
- USB communication (LD1), user LED (LD2), power LED (LD3)
- Two push buttons – USER and RESET
- USB re-enumeration capability – virtual com port, mass storage, debug port
- Supported by wide choice of IDEs including IAR, Keil, GCC-based IDEs
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32L432KC MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino Connectivity
-19%
Development BoardsSTMICROELECTRONICS Development Board, STM32L432KC MCU, ST-LINK/V2-1 Debugger/Programmer, Arduino Connectivity
- Model: STM32L432KC MCU
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- STM32 microcontroller in 32-pin package
SKU: n/a -
Development Boards
STMICROELECTRONICS Development Board, STM32L476RG MCU, On-Board STLINK/V2-1, Arduino & ST Morpho Connectivity
-13%
Development BoardsSTMICROELECTRONICS Development Board, STM32L476RG MCU, On-Board STLINK/V2-1, Arduino & ST Morpho Connectivity
Model: STM32 Nucleo-64 boards
Crystal oscillator: 32.768 kHz
Board-specific features: 24 MHz or 48 MHz HSE
Flexible power-supply options: ST-LINK USB VBUS or external sources
On-board ST-LINK debugger/programmer with USB re-enumerationSKU: n/a -
Development Boards
T48 Universal Programmer Kit with 6 IC Adapters
- T48 (TL866-3G) hardware Parameters: 32-bit MCU with 120MHZ, 4-layer PCB Design, USB2.0 HS 480MHZ;
- Volume: 10X6.5X2.8 cm (almost the same as TL866II);
- 16-channel ISP, total 56-channel dedicated IO, 56-channel high-speed high-voltage isolation;
- VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable;
- Power consumption: 5V <500MA.
SKU: n/a -
-
Development Boards
TL866II Plus Universal Programmer Kit with 6 IC Adapters
- Model: TL866II Plus
- With Multi-functional ICSP interface
- 40pin ZIF socket, fully automatic, support fast mode SPI
- USB interface for both data transfer and power supply
- With over-voltage and over current protection
- Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
- English Language Support
- It can program faster than another programmer 500%~1000%
SKU: n/a -
Development Boards
Transparent Blue ABS Plastic Case for UNO R3
- Made of high-quality ABS plastic, provide good protective
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Development Boards
Transparent White UNO R3 Injection Molding Case with Bubble
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damage, dust, and scratches Clear the Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Development Boards
TW Link V2 Programmer For STM8 and STM32
- Voltage: 5V
- The wiring is very simple because the interface definition is marked directly on the aluminum housing protects
- Internal board of this programmer is with 500MA self-recovery fuse
- It’s convenient and practical, fast speed and stable
- The interface easy to use simple horns seat pitch of 2.54
- Weight: 10g
SKU: n/a -
Development Boards
UNO Proto Shield prototype expansion board with SYB-170 mini breadboard
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: n/a -
-
Development Boards
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
-
Development Boards
USB ICSP PIC Programmer – UIC00B
- Program most of the +3.3V or +5V PIC
- Compatible with PICkit2’s UART Tool and Logic Tool
- The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
-
Compatible with Windows XP, Vista, 7, 8 and 8.1.
-
Compatible with Microchip’s PICkit 2.
-
Powered directly from the USB port.
-
NO EXTERNAL POWER REQUIRED for UIC00B to function.
-
Compatible with PICkit2’s Logic Tool and UART Tool.
SKU: n/a -
Development Boards
VS1053 MP3 Recording Module Development Board with Onboard Recording Function
-16%
Development BoardsVS1053 MP3 Recording Module Development Board with Onboard Recording Function
- SPI interface, the control signal lines are led out
- A headphone and stereo output
- Onboard Microphone for recording
- A line-in input interface
- Separate 3.5 mm Jack for MIC and Speaker
- Onboard Power Indicator
- 3.3V and 2.8V of LDO chip AMS-1117 on board provides up to 800mA current
SKU: n/a -
Development Boards
Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
-7%
Development BoardsWaveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
- Power Input: 5V
- CM4 Socket: suitable for all variants of Compute Module 4
- Connector: M.2 M KEY slot, for connecting communication module or NVME SSD; Arduino compatible GPIO header
- USB: USB 2.0 Type A x 1
- Camera: MIPI CSI-2 × 1 (15pin 1.0mm FPC connector)
SKU: n/a -
Development Boards
Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
- It comes with USB and is more convenient to use.
- The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
- Built-in high precision RC, without external crystal oscillator, can be stable operation.
- Less peripheral parts, simple circuit design.
SKU: n/a -
Development Boards
White UNO R3 Injection Molding Case with Bubble
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damage, dust, and scratches Clear the Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a
