Development Boards
Showing 97–120 of 269 results
-
Development Boards
Banana Pi – W3
Banana Pi BPI-W3 single board computer is designed and developed by bananapi team for professional and enterprise users, powered by Rockchip RK3588 SoC quad ARM Cortex-A76 and quad Cortex-A55 consists of an eight-core CPU processor with dynamic frequency scaling up to 2.4GHz. Embedded high -performance 3D and 2D image acceleration module, AI accelerator NPU with a built -in 6 TOPS computing power.
SKU: n/a -
Development Boards
BeagleBoard Black PRUCAPE
- Expansion Connector- Connection to BeagleBone / BeagleBone Black
- UART- Hardware UART to PRU Subsystem
- Sensors-Temperature sensor monitoring using a 1-wire interface
- Audio-Audio jack connection output
- GPIO-Dual GPIO push-button switch
- LEDs- Bank of PRU0 & PRU1 LEDs
SKU: n/a -
Development Boards
BeagleBone AI-64, TDA4VM, ARM Cortex-A72, 4GB RAM, 16GB eMMC, USB 3.0 Type-C, M.2 E-key
-8%
Development BoardsBeagleBone AI-64, TDA4VM, ARM Cortex-A72, 4GB RAM, 16GB eMMC, USB 3.0 Type-C, M.2 E-key
- Model: BeagleBone AI-64, TDA4VM
- Processor: Texas Instruments Jacinto TDA4VM 2x ARM Cortex-A7 2
- The maximum clock speed: 2 GHz
- Co-processor: C7x + MMA, 2xC66x, 12xPRU, 6xARM Cortex-R5, PowerVR Rogue 8XE GE8430, H.264 encode, H.264 / H.265 decode
- Network: Gigabit Ethernet M.2 key E PCIe / USB / SDIO slot
- Built-in sensors: CPU temperature sensor
SKU: n/a -
Development Boards
BeagleBone Black REV C
- Sitara AM3358BZCZ100 ARM Cortex-A8 32-Bit RISC microprocessor, up to 1GHz
- Onboard HDMI to connect directly to TVs and monitors
- More and faster memory now with 512MB DDR3L 400MHz SDRAM, 4GB eMMC Memory
- Onboard storage frees up the microSD card slot for greater expansion
- Support for existing Cape plug-in boards
- TPS65217C PMIC regulator and one additional LDO
- Debug support: Optional onboard 20-pin CTI JTAG
- HS USB 2.0 Client and Host ports
SKU: n/a -
-
Development Boards
Cable For Arduino UNO/MEGA (USB A to B)-50 cm
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 50 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
SKU: n/a -
-
Development Boards
Colorduino LED RGB Dot Matrix Driver Board with 5mm 8*8 RGB LED for Arduino
- 8bits colors support with 6bits correction for each color in every dots
- Hardware 16MHz PWM support
- 24 constant current channels of 100mA each
- Current Consumption(Except LED matrix): 20mA typical (40mA maximum)
- Drive current(Every channel):Â 500mA
- Drive current(Every dot) :Â 58mA
SKU: n/a -
Development Boards
CY8CKIT-PSOC-024LP, PSOC Family Processor Modules with LCD Display Development Kit
-19%
Development BoardsCY8CKIT-PSOC-024LP, PSOC Family Processor Modules with LCD Display Development Kit
- Product: CY8CKIT-PSOC-024LP, PSOC Family Processor Modules with LCD Display Development Kit
- Core Architecture: M8C
- Silicon Core Number: CY8C24093
- No. of Bits: 8bit
- Kit Contents: Board, QuickStart Guide, Safety Leaflet
SKU: n/a -
-
Development Boards
Cytron 2Amp Motor Driver Shield
-
Logic control, 5V from Arduino main board
-
Polarity protection for External motor power input
-
2 fast test buttons for each motor channel
-
Motor Driven Voltage：6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source)
-
Up to 2A current each channel
-
Pin 4, 5,6,7 are used to drive two DC motor
-
Support PWM speed control
-
Support advance speed control
SKU: n/a -
-
Development Boards
Cytron 40 pins PIC Start-Up Kit SK40C
-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
Operating Voltage Range: 7V – 15VDC
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
-
UART connection to interface with other controller or even computer.
SKU: n/a -
-
Development Boards
Cytron Arduino PS2 Shield
- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
SKU: n/a -
Development Boards
Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno
- Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
- Separate 3.3V voltage regulator for ESP8266-12 WROOM-02 module, 500mA max output.
- Each and every board is preassembled and tested before it is being shipped out to you.
- 802.11 b/g/n.
- Support Wi-Fi Direct (P2P), soft-AP.
- Integrated TCP/IP protocol stack.
SKU: n/a -
Development Boards
Cytron LCD keypad Shield High Quality
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: n/a -
Development Boards
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
SKU: n/a
