Development Boards
Showing 97–120 of 270 results
-
Development Boards
Banana Pi – W3
Banana Pi BPI-W3 single board computer is designed and developed by bananapi team for professional and enterprise users, powered by Rockchip RK3588 SoC quad ARM Cortex-A76 and quad Cortex-A55 consists of an eight-core CPU processor with dynamic frequency scaling up to 2.4GHz. Embedded high -performance 3D and 2D image acceleration module, AI accelerator NPU with a built -in 6 TOPS computing power.
SKU: n/a -
Development Boards
BeagleBoard Black PRUCAPE
- Expansion Connector- Connection to BeagleBone / BeagleBone Black
- UART- Hardware UART to PRU Subsystem
- Sensors-Temperature sensor monitoring using a 1-wire interface
- Audio-Audio jack connection output
- GPIO-Dual GPIO push-button switch
- LEDs- Bank of PRU0 & PRU1 LEDs
SKU: n/a -
Development Boards
BeagleBone AI-64, TDA4VM, ARM Cortex-A72, 4GB RAM, 16GB eMMC, USB 3.0 Type-C, M.2 E-key
-8%
Development BoardsBeagleBone AI-64, TDA4VM, ARM Cortex-A72, 4GB RAM, 16GB eMMC, USB 3.0 Type-C, M.2 E-key
- Model: BeagleBone AI-64, TDA4VM
- Processor: Texas Instruments Jacinto TDA4VM 2x ARM Cortex-A7 2
- The maximum clock speed: 2 GHz
- Co-processor: C7x + MMA, 2xC66x, 12xPRU, 6xARM Cortex-R5, PowerVR Rogue 8XE GE8430, H.264 encode, H.264 / H.265 decode
- Network: Gigabit Ethernet M.2 key E PCIe / USB / SDIO slot
- Built-in sensors: CPU temperature sensor
SKU: n/a -
Development Boards
BeagleBone Black REV C
- Sitara AM3358BZCZ100 ARM Cortex-A8 32-Bit RISC microprocessor, up to 1GHz
- Onboard HDMI to connect directly to TVs and monitors
- More and faster memory now with 512MB DDR3L 400MHz SDRAM, 4GB eMMC Memory
- Onboard storage frees up the microSD card slot for greater expansion
- Support for existing Cape plug-in boards
- TPS65217C PMIC regulator and one additional LDO
- Debug support: Optional onboard 20-pin CTI JTAG
- HS USB 2.0 Client and Host ports
SKU: n/a -
-
Development Boards
Cable For Arduino UNO/MEGA (USB A to B)-50 cm
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 50 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
SKU: n/a -
-
Development Boards
Colorduino LED RGB Dot Matrix Driver Board with 5mm 8*8 RGB LED for Arduino
- 8bits colors support with 6bits correction for each color in every dots
- Hardware 16MHz PWM support
- 24 constant current channels of 100mA each
- Current Consumption(Except LED matrix): 20mA typical (40mA maximum)
- Drive current(Every channel): 500mA
- Drive current(Every dot) : 58mA
SKU: n/a -
ARM Microcontroller, AVR Development Board, Development Boards
Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development
-69%
ARM Microcontroller, AVR Development Board, Development BoardsCora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development
The Cora Z7 is our most cost-optimized SoC development board featuring the power and flexibility of AMD’s Zynq®-7000 SoC family.
Featuring Arduino™ headers, 1Gbps Ethernet, an onboard analog-to-digital converter, and Pmod ports, the Cora Z7 can be used in a variety of embedded applications. The Zynq-7000(S) SoC family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, delivering cost-optimized system integration. At such a friendly price point, the Cora Z7 is a great development board to get started with Zynq-based designs.
The Cora Z7 is supported by AMD’s Vivado ML, including the free Vivado ML Standard Edition. You can also interact with the processing system (PS) with AMD Vitis Unified Software Platform and PetaLinux Tools.
SKU: n/a -
Development Boards
CY8CKIT-PSOC-024LP, PSOC Family Processor Modules with LCD Display Development Kit
-19%
Development BoardsCY8CKIT-PSOC-024LP, PSOC Family Processor Modules with LCD Display Development Kit
- Product: CY8CKIT-PSOC-024LP, PSOC Family Processor Modules with LCD Display Development Kit
- Core Architecture: M8C
- Silicon Core Number: CY8C24093
- No. of Bits: 8bit
- Kit Contents: Board, QuickStart Guide, Safety Leaflet
SKU: n/a -
-
Development Boards
Cytron 2Amp Motor Driver Shield
-
Logic control, 5V from Arduino main board
-
Polarity protection for External motor power input
-
2 fast test buttons for each motor channel
-
Motor Driven Voltage：6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source)
-
Up to 2A current each channel
-
Pin 4, 5,6,7 are used to drive two DC motor
-
Support PWM speed control
-
Support advance speed control
SKU: n/a -
-
Development Boards
Cytron 40 pins PIC Start-Up Kit SK40C
-
ICSP connector for UIC00B -simple and fast method to load program.
-
Perfect fit for 40 pins PIC16F and PIC18F.
-
Operating Voltage Range: 7V – 15VDC
-
2 x programmable switch.
-
2 x LED indicator.
-
Exchangeable Crystal.
-
Existing pad for 16 x 2 characters LCD display.
-
UART connection to interface with other controller or even computer.
SKU: n/a -
-
Development Boards
Cytron Arduino PS2 Shield
- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
SKU: n/a -
Development Boards
Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno
- Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
- Separate 3.3V voltage regulator for ESP8266-12 WROOM-02 module, 500mA max output.
- Each and every board is preassembled and tested before it is being shipped out to you.
- 802.11 b/g/n.
- Support Wi-Fi Direct (P2P), soft-AP.
- Integrated TCP/IP protocol stack.
SKU: n/a -
Development Boards
Cytron LCD keypad Shield High Quality
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: n/a
