Drone Transmitter and Receiver
Showing 25–45 of 45 results
-
Drone Transmitter and Receiver, FPV Antennas and Trans-Receivers
Happymodel ExpressLRS ES24TX 2.4GHz Micro TX Module
-34%
Drone Transmitter and Receiver, FPV Antennas and Trans-ReceiversHappymodel ExpressLRS ES24TX 2.4GHz Micro TX Module
This Micro TX is designed by Happymodel and based on the open-source ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285, and the SX1280 RF chip. The ES24TX module is a complete solution that is plug and play and already pre-loaded with Expresslrs firmware.
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Made in india Remote Controller
-
Display7-inch LCD touch screen
-
Resolution1024 x 600
-
Memory8GB
-
Storage64GB – extendable
-
NetworkWLAN
-
External InterfaceUSB, LAN port, 3.5mm Audio jack
-
Serial InterfaceUSB x 2
-
Industrial Protection GradeIP4
-
Temperature-10°C – 55°C
-
N.W930 Grams
-
Battery Life3 Hours
-
Battery Capacity2000mAh(3 Cell)
-
AntennaDual Antenna 2.4Ghz
-
Working Frequency2.4GHZ
-
RF Power30dBM@CE/FCC
-
Remote Control Range15 KM
-
Channel16
-
ProcessorIntel N5105
-
Operating SystemAXLDOS secure O/S
-
ExtendabilityN+1 configuration and realtime broadcasting
SKU: n/a -
-
-
DRONE COMBO, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & Accessories
Power Distribution Board 200A / PDB Capable of 200A Current Carrying Capacity for 14S LiPo Battery / 5V/12V BEC/Four XT90 Connectors/Current Measurement Sensor (up to 200A)
-5%
DRONE COMBO, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & AccessoriesPower Distribution Board 200A / PDB Capable of 200A Current Carrying Capacity for 14S LiPo Battery / 5V/12V BEC/Four XT90 Connectors/Current Measurement Sensor (up to 200A)
- Capable of handling high current (up to 200A), Anti-spark soft switching for inductive loads
- Input voltage up to 15-60V (12S), 4x XT90 connectors (50A each for ESC with motor)
- Analog battery voltage and current sensors output for flight controllers and robotic applications
- DC-DC converter from 15-60V input (up to 12S battery) to 5V 5A output, DC-DC converter from 15-48 V input (up to 12S battery) to 12V 5A output
- 5V and 12V power output terminals (standard 2.54mm/0.1″ connectors), Power output for flight controller (for eg., Pixhawk, Cube Orange)
SKU: n/a -
Drone Transmitter and Receiver
Product: MINI XF5805 5.8G Transmitter Output power @transmission distance: 0.5km@25mW, 1km@200mW, 2km@600mW Frequency point: 37CH Video format: NTSC/PAL Input voltage: 7V~26V
-25%
Drone Transmitter and ReceiverProduct: MINI XF5805 5.8G Transmitter Output power @transmission distance: 0.5km@25mW, 1km@200mW, 2km@600mW Frequency point: 37CH Video format: NTSC/PAL Input voltage: 7V~26V
- Operating Voltage (VDC):7.4-12 V
- No of channels:12
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
SKU: n/a -
Drone Transmitter and Receiver
Radiolink AT9S Pro 2.4GHz 12CH RC Drone Remote with R9DS Receiver
-25%
Drone Transmitter and ReceiverRadiolink AT9S Pro 2.4GHz 12CH RC Drone Remote with R9DS Receiver
- Operating Voltage(V): 7.4~18.0V
- Operating Current (A): DSSS & FHSS <90mA at 12V , CRSFdepend on the transmission power selection
- Frequency Band: 2.4GHz ISM band (2400mHz ~ 2483.5MHz)
- Spread Spectrum mode: DSSS & FHSS/CRSF
- Adjacent channel rejections: >38dbm
- Equipped with RC airplane, helicopter, glider, multirotor, car and boat programming and 15-model memory capacity
SKU: n/a -
Drone Transmitter and Receiver, FPV Antennas and Trans-Receivers
Radiolink R12DS 2.4GHz RC Receiver 12 Channels SBUS/PWM
Drone Transmitter and Receiver, FPV Antennas and Trans-ReceiversRadiolink R12DS 2.4GHz RC Receiver 12 Channels SBUS/PWM
- Operating Voltage: 3~10V
- Operating Current: 38-45mA@5V
- Section Precision: 4096, 0.25us per section
- Compatible with extended telemetry module PRM-01
- Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
SKU: n/a -
Drone Transmitter and Receiver
Radiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
-35%
Drone Transmitter and ReceiverRadiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
- All New ergonomics design with the small size handy to use and travel.
- Three times faster than Open TX
- Built-in IS 900 mAh lithium battery
- Provides excellent anti-interference performance
- Super low battery consumption of 150 mA
- Unlimited models can be stored.
- Bluetooth connectivity for App control and use as a wireless emulator
SKU: n/a -
Drone Transmitter and Receiver
Radiomaster TX12 MKII ExpressLRS EdgeTX Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
-25%
Drone Transmitter and ReceiverRadiomaster TX12 MKII ExpressLRS EdgeTX Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
- Item: TX12 Mark II Radio
- Frequency: 2.400GHZ-2.480GHZ
- RF Chip: ExpressLRS (ELRS) / CC2500
- Working Current: 320mA@8.4V (ELRS) / 180mA@8.4V (CC2500)
- Voltage Range: 6.6-8.4v DC
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Radiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
-3%
Drone Parts, Drone Transmitter and ReceiverRadiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
- Transmission frequency: 2.400GHz-2.480GHz
- Antenna gain: 2db (transmit power adjustable)
- Working current: 400mA
- Working voltage: 6.6-8.4v DC
- Remote control distance:> 2km @ 22dbm
- Radio firmware: EdgeTX
SKU: n/a -
Drone Transmitter and Receiver
Radiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
-31%Drone Transmitter and ReceiverRadiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
- Transmission frequency: 2.400GHz-2.480GHz
- Antenna gain: 2db (transmit power adjustable)
- Working current: 400mA
- Working voltage: 6.6-8.4v DC
- Remote control distance:> 2km @ 22dbm
- Radio firmware: EdgeTX
SKU: n/a -
Drone Transmitter and Receiver
Radiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
-4%
Drone Transmitter and ReceiverRadiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
- Charging: Built-in USB-C Charging
- Display: 128*64 Monochrome LCD
- Operational current: 160mA@8.4V
- Operational voltage: 6.6-8.4v DC
- Battery Slot: 2 x 18350 (Not included)
- Supported protocols: ELRS
- Physical dimensions: 170*159*108mm
- Weight: 355gm
SKU: n/a -
Drone Transmitter and Receiver
TS832 48Ch 5.8G 600mW Wireless Audio/Video Transmitter for FPV RC
-25%
Drone Transmitter and ReceiverTS832 48Ch 5.8G 600mW Wireless Audio/Video Transmitter for FPV RC
- Transmitter 600mW/48CH >5km(open area).
-
Frequency control: built-in frequency and phase lock loop.
- Transmitter module connector: Female RP-SMA.
-
Antenna connector: Male RP-SMA.
-
Supply Voltage: 7-24 V
-
Current: 220 mA.
-
48 CH is compatible with all FPV 5.8g receivers.
SKU: n/a -
Drone Transmitter and Receiver, FPV Antennas and Trans-Receivers
TS835 FPV 5.8G 600MW 48CH (2-6S) Wireless AV Transmitter
-50%
Drone Transmitter and Receiver, FPV Antennas and Trans-ReceiversTS835 FPV 5.8G 600MW 48CH (2-6S) Wireless AV Transmitter
- No. of Channels: 48CH
- Antenna Gain: 2db
- Frequency: 5.8G
- Video Format: NTSC / PAL Auto
- 48 CH compatible with all FPV 5.8g receivers.
- 5.8G 600mW 40 Channels AV wireless FPV transmitter
- Super small 200mA current for 600mW wireless transmitter power.
- 600mW transmitter power assure 5KM distance in open area,
SKU: n/a -
Drone Transmitter and Receiver
Xf model xf5806 5.8g 40ch 25/100/200/400mw video Switchable FPV VTX transmitter
-26%
Drone Transmitter and ReceiverXf model xf5806 5.8g 40ch 25/100/200/400mw video Switchable FPV VTX transmitter
- Model: XF5806_V2
- Input voltage: 7-26V
- Onboard BEC output: 5V
- Channels: 40CH
- Transmitting: 25/100/200/400mW Switchable
- Video format: PAL/NTSC
- Control protocol: TBS Smartaudio V2
- Antenna connector: MMCX
- Wiring: pad
- Mounting hole: 20*20mm
SKU: n/a
