Flight Controller & Accessories
Showing 25–48 of 68 results
-
Flight Controller & Accessories
F405 V1.1 Flight Controller+45A 2-6S 4 in 1 ESC Flytower (mpu6000)
-13%
Flight Controller & AccessoriesF405 V1.1 Flight Controller+45A 2-6S 4 in 1 ESC Flytower (mpu6000)
- Product: F405 V1.1 Flight Controller+45A 2-6S 4 in 1 ESC Flytower
- This is combo kit of Flight controller & ESC
- High performance & efficient flight controller & ESC
- Light weight, Easy to connect
- Flight controller comes with ARM processor
SKU: n/a -
Flight Controller & Accessories
F7 MINI V1.0 Flight Controller +35A 2-5S BLHELI_S 4 in 1 ESC Flytower
-13%
Flight Controller & AccessoriesF7 MINI V1.0 Flight Controller +35A 2-5S BLHELI_S 4 in 1 ESC Flytower
- Product: Flight Controller + BLHELI_S 4 in 1 ESC Flytower
- This is combo kit of Flight controller & ESC
- High performance & efficient flight controller & ESC
- Light weight, Easy to connect
- Flight controller comes with ARM processor
SKU: n/a -
-
Drone Parts, Flight Controller & Accessories
Hex Pixhawk 2.1 cube PX4 PIX 32 Bit Flight Controller Autopilot
-51%
Drone Parts, Flight Controller & AccessoriesHex Pixhawk 2.1 cube PX4 PIX 32 Bit Flight Controller Autopilot
- Product: Flight Controller Autopilot
- Model: HX4-06159
- Input voltage: 3.3 V / 5 V
- Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
- Cube Orange targets education, amateur drones lovers, and professionals with cost-effective flight control hardware
SKU: n/a -
Flight Controller & Accessories
Hex Pixhawk cube+ Flight Controller Autopilot
- Model: HX4-06222
- Input voltage: 3.3 V / 5 V
- Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
- Cube Orange targets education, amateur drones lovers, and professionals with cost-effective flight control hardware
SKU: n/a -
Drone Parts, Flight Controller & Accessories
Holybro Pix32 v6 Flight Controllers FC Module Standard Set
-33%
Drone Parts, Flight Controller & AccessoriesHolybro Pix32 v6 Flight Controllers FC Module Standard Set
- High-performance STM32H743 Processor with more computing power & RAM
- New cost-effective design with the low-profile form factor
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
SKU: n/a -
Drone Parts, Flight Controller & Accessories
Holybro Pix32 v6 Flight Controllers FC Module Standard Set
-39%
Drone Parts, Flight Controller & AccessoriesHolybro Pix32 v6 Flight Controllers FC Module Standard Set
- High-performance STM32H743 Processor with more computing power & RAM
- New cost-effective design with the low-profile form factor
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
SKU: n/a -
Flight Controller & Accessories
Holybro Pix32 v6 Flight Controllers FC Module Standard Set
- High-performance STM32H743 Processor with more computing power & RAM
- New cost-effective design with the low-profile form factor
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
SKU: n/a -
Flight Controller & Accessories
KK2.1.5 LCD Flight Controll Board for FPV Racing Drone | e | kk flight controller
-54%
Flight Controller & AccessoriesKK2.1.5 LCD Flight Controll Board for FPV Racing Drone | e | kk flight controller
The kk 2.1.5 flight controller is next big evolution of the first generation KK flight controller boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!The KK2.1.5 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.Description:
Item number: KK2.1.5Size: 51mm x 51mm x 12mmWeight: 21 gram (Inc Piezo buzzer)IC: AtmegaGyro/Acc: InvenSense Inc.Auto-level: YesInput Voltage: 4.8-6.0VAVR interface: standard 6 pinSignal from Receiver: 1520us (5 channels)Signal to ESC: 1520usSKU: n/a -
Drone Gimbal Accessories, Drone Kit, Flight Controller & Accessories
Made in India Flight controller for Drone
-26%
Drone Gimbal Accessories, Drone Kit, Flight Controller & AccessoriesMade in India Flight controller for Drone
Auto Obstacle Avoidance: Automatically detects and avoids obstacles during missions. Switches to loiter mode for manual control, ensuring smooth mission resumption. Spray Resume Functionality: Resumes spraying immediately after mission restart, ensuring consistent and efcient eld coverage. Flow Meter Pulse and Level Calculation: Displays liquid consumption accurately using pulse data from the ow meter and calculates the liquid level in the tank.
Rangeunder Sensor Support: Compatible with sensors like H30, R21 front, and R21 rear, commonly used as altimeters and radar respectively sensors for enhanced accuracy. Semi-Auto Mode: Enables manual altitude adjustments during Autonomous missions for obstacle clearance. Simple Compass Calibration: Reduces required rotations, simplifying the calibration process.
SKU: n/a -
Flight Controller & Accessories
Made in india zerodrag warp f7 flight controller
Product Name: ZERODRAG WARP F7
• Power Input: 3-6S LiPo
• Mounting: 30.5 x 30.5mm (4mm hole size)
• Dimension: 37 x 38.5 x 7.1 mm
• Weight: 9.35g
• MCU: STM32F722
• GYRO (IMU): ICM42688P / MPU6000
• Barometer: BMP280 • OSD Chip: AT7456E
• USB Port: Type-C
• BlackBox-Flash: 32MB
• Camera Control: Pad • 5V Bec: 3 Amp
• 10V Bec: 2.5 Amp • 3.3V Regulator: 500 mA
• USB 4.5V: For Receiver and GPS module
• ESC Signal Pads: M1 – M6 on top side and M7-M8 as T6 & R6
• UARTs: 6 UARTs with 6 motor pads / 5 UARTs with 8 motor pads
SKU: n/a -
-
-
Flight Controller & Accessories
Mini OSD for Pixhawk Flight Controller
- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6 pin ISP header
- 2 independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections
Compatible flight controller:
APM2.5/2.6/2.8
Pixhawk PX4SKU: n/a -
-
Flight Controller & Accessories
Naze32 10DOF Flight Control Board
- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
SKU: n/a
