Drone Parts
Showing 457–480 of 1037 results
-
Drone Parts
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
SKU: n/a -
GPS Modules
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
SKU: n/a -
GPS Modules
Gps+BD Antenna Usb Gps Receiver Antenna For Car Driving Recorder
Model NumberGPS-10Typegps antennaVoltage3V-5VImpedance(Ω)50PolarizationRHCPLNA Gain (Without cable)(dBi)28 TypicalWeight(gram)<110Connector TypeSMA- OR FARKA OR customizeColorBlackFrequency1568MHzV.S.W.R<1.65SKU: n/a -
Drone Transmitter and Receiver, FPV Antennas and Trans-Receivers
Happymodel ExpressLRS ES24TX 2.4GHz Micro TX Module
-34%
Drone Transmitter and Receiver, FPV Antennas and Trans-ReceiversHappymodel ExpressLRS ES24TX 2.4GHz Micro TX Module
This Micro TX is designed by Happymodel and based on the open-source ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285, and the SX1280 RF chip. The ES24TX module is a complete solution that is plug and play and already pre-loaded with Expresslrs firmware.
SKU: n/a -
-
Drone Parts, Flight Controller & Accessories
Hex Pixhawk 2.1 cube PX4 PIX 32 Bit Flight Controller Autopilot
-41%
Drone Parts, Flight Controller & AccessoriesHex Pixhawk 2.1 cube PX4 PIX 32 Bit Flight Controller Autopilot
- Product: Flight Controller Autopilot
- Model: HX4-06159
- Input voltage: 3.3 V / 5 V
- Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
- Cube Orange targets education, amateur drones lovers, and professionals with cost-effective flight control hardware
SKU: n/a -
-
Flight Controller & Accessories
Hex Pixhawk cube+ Flight Controller Autopilot
- Model: HX4-06222
- Input voltage: 3.3 V / 5 V
- Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
- Cube Orange targets education, amateur drones lovers, and professionals with cost-effective flight control hardware
SKU: n/a -
Drone Kit
Hexacopter Drone Combo with APM 2.8 (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
-48%
Drone KitHexacopter Drone Combo with APM 2.8 (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
1 x Ardupilot APM 2.8 Flight Control Board
1 x DJI F550 Hexacopter Frame Kit
6 x A2212 1000KV Brushless Motor For RC Airplane / Quadcopter
6 x 30A Brushless ESC
3 x 1045 Propeller 10in 10×4.5 For Drone,pair
1 x Flysky FS-i6 2.4G 10CH TX-RX
1 x APM Pixhawk Power Module with XT60
1 x Nylon Strap Belt for RC Lipo Battery
1 x 3D printed Shock Absorber Anti-vibration Set for APM Pixhawk
SKU: n/a -
Drone Kit
Hexacopter Drone Combo with APM 2.8 and 10ch FlySky FS-I6S (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
-15%
Drone KitHexacopter Drone Combo with APM 2.8 and 10ch FlySky FS-I6S (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
This Hexacopter combo kit includes almost all parts for the basic Hexacopter drone with 10ch RX TX. It includes everything to make and fly your own Hexacopter. The flight controller comes with this drone is APM 2.8 which is a very popular and stable flight controller.
Package Include:
1 x Ardupilot APM 2.8 Flight Control Board
1 x DJI F550 Hexacopter Frame Kit
6 x A2212 1000KV Brushless Motor For RC Airplane / Quadcopter
6 x 30A Brushless ESC
3 x 1045 Propeller 10in 10×4.5 For Drone
1 x Flysky FS-i6S 2.4G 10CH TX-RX
1 x APM Pixhawk Power Module with XT60
1 x Nylon Strap Belt for RC Lipo Battery
1 x 3D printed Shock Absorber Anti-vibration Set for APM Pixhawk
SKU: n/a -
Drone Kit
Hexacopter Drone Combo with DJI NAZA m lite and 6ch FlySky FS-I6 (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6 + Belt)
-3%
Drone KitHexacopter Drone Combo with DJI NAZA m lite and 6ch FlySky FS-I6 (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6 + Belt)
This Hexacopter combo kit includes almost all parts for the basic Hexacopter drone with 6ch RX TX and DJI NAZA m-lite. It includes everything to make and fly your own Hexacopter. The flight controller comes with this drone is DJI Naza m lite. which is a very popular and stable flight controller.
SKU: n/a -
DRONE COMBO, Drone Kit
Hexacopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
-46%
DRONE COMBO, Drone KitHexacopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
1 x Pixhawk 2.4.8 PX4 Flight Controller KIT
1 x DJI F550 Hexacopter Frame Kit
6 x A2212 1000KV Brushless Motor For RC Airplane / Quadcopter
6 x 30A Brushless ESC
3 x 1045 Propeller 10in 10×4.5 For Drone
1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver
1 x APM Pixhawk Power Module with XT60
1 x Nylon Strap Belt for RC Lipo Battery
1 x 3D printed Shock Absorber Anti-vibration Set for APM Pixhawk
SKU: n/a -
-
(ESC) Drone Speed Controller
HobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed Controller
-19%
(ESC) Drone Speed ControllerHobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed Controller
- Waterproof and dustproof, suitable for races in all weather conditions.
- Small size with built-in capacitor module.
- Fwd/Rev/Br running mode fits various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
- Great current endurance capability.
- Great built-in BEC output capacity.
SKU: n/a -
(ESC) Drone Speed Controller
Hobbywing Skywalker- 80A UBEC
1 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)SKU: n/a
