Drone Parts
Showing 817–840 of 1045 results
-
Flight Controller & Accessories
Radiolink Pixhawk Flight controller board
Radiolink Has optimised its pixhawk flight controller PCB layout and height hold with the barometer sensor MS5611. It is a highly stable flight controller that comes from the radiolink. This controller provides more stable flight performance even at high speed. It integrated the newest 32-bit chip technology and high-end sensors, this is absolutely one of the best flight controllers for quadcopters.
Feature:
- Multi-sound buzzer interface support.
- Multiple flight modes, support for self-stability, height-set, hover, sports, freestyle, circling, following, return, guidance, automatic, and all-powerful.
- Abundant connectivity options for additional peripherals (GPS, I2C, SPI).
- 14 PWM / servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible).
- Providing a multi-sound buzzer interface.
- Multiple flight mode switches freely, Helicopter, Fixed-wing, Multi-rotor, Model Car.
- All interfaces are fully tested and accurately detected by an automatic detection system, avoiding bad interfaces leading to flight control installation unsuccessfully.
- Support DSM Spektrum receiver.
- Advanced 32-bit CortexM4 ARM high-performance processor, and 32-bit STM32STMF100 failsafe co-processor.
- Equipped with buzzer, 4G memory card, safety switch and power module.
TECHNICAL Processor 32bit 32F427 ARM Cortex M4 Core + FPU (floating point unit) Frequency 168 MHZ Memory Size 2 MB Flash RAM Size 256 KB Sensor ST Micro L3GD20H 16 bit gyroscope FLIGHT CONTROLLER Sensors MEAS MS5611 barometer Hardware Details Barometer sensor MS5611 Three-axis digital gyroscope IST8310 triaxial accelerometer(E-compass) IST8310 Six-axis accelerometer(Gyro) MPU6000 FRAM FM25V02
(256Kb)All Functions Automation Software Testing System Have SKU: n/a -
-
Drone Transmitter and Receiver, FPV Antennas and Trans-Receivers
Radiolink R12DS 2.4GHz RC Receiver 12 Channels SBUS/PWM
Drone Transmitter and Receiver, FPV Antennas and Trans-ReceiversRadiolink R12DS 2.4GHz RC Receiver 12 Channels SBUS/PWM
- Operating Voltage: 3~10V
- Operating Current: 38-45mA@5V
- Section Precision: 4096, 0.25us per section
- Compatible with extended telemetry module PRM-01
- Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
SKU: n/a -
Drone Transmitter and Receiver
Radiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
-35%
Drone Transmitter and ReceiverRadiolink T8S 2.4GHz 8CH Transmitter + R8EF Receiver with Built-in Rechargeable Battery and Bluetooth for App control
- All New ergonomics design with the small size handy to use and travel.
- Three times faster than Open TX
- Built-in IS 900 mAh lithium battery
- Provides excellent anti-interference performance
- Super low battery consumption of 150 mA
- Unlimited models can be stored.
- Bluetooth connectivity for App control and use as a wireless emulator
SKU: n/a -
Drone Transmitter and Receiver
Radiomaster TX12 MKII ExpressLRS EdgeTX Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
-25%
Drone Transmitter and ReceiverRadiomaster TX12 MKII ExpressLRS EdgeTX Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
- Item: TX12 Mark II Radio
- Frequency: 2.400GHZ-2.480GHZ
- RF Chip: ExpressLRS (ELRS) / CC2500
- Working Current: 320mA@8.4V (ELRS) / 180mA@8.4V (CC2500)
- Voltage Range: 6.6-8.4v DC
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Radiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
-3%
Drone Parts, Drone Transmitter and ReceiverRadiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
- Transmission frequency: 2.400GHz-2.480GHz
- Antenna gain: 2db (transmit power adjustable)
- Working current: 400mA
- Working voltage: 6.6-8.4v DC
- Remote control distance:> 2km @ 22dbm
- Radio firmware: EdgeTX
SKU: n/a -
Drone Parts
Radiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
-18%
Drone PartsRadiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
- Transmission frequency: 2.400GHz-2.480GHz
- Antenna gain: 2db (transmit power adjustable)
- Working current: 400mA
- Working voltage: 6.6-8.4v DC
- Remote control distance:> 2km @ 22dbm
- Radio firmware: EdgeTX
SKU: n/a -
Drone Transmitter and Receiver
Radiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
-31%Drone Transmitter and ReceiverRadiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver
- Transmission frequency: 2.400GHz-2.480GHz
- Antenna gain: 2db (transmit power adjustable)
- Working current: 400mA
- Working voltage: 6.6-8.4v DC
- Remote control distance:> 2km @ 22dbm
- Radio firmware: EdgeTX
SKU: n/a -
Drone Parts
Radiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
- Charging: Built-in USB-C Charging
- Display: 128*64 Monochrome LCD
- Operational current: 160mA@8.4V
- Operational voltage: 6.6-8.4v DC
- Battery Slot: 2 x 18350 (Not included)
- Supported protocols: ELRS
- Physical dimensions: 170*159*108mm
- Weight: 355gm
SKU: n/a -
Drone Transmitter and Receiver
Radiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
-4%
Drone Transmitter and ReceiverRadiomaster Zorro ELRS Radio Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver
- Charging: Built-in USB-C Charging
- Display: 128*64 Monochrome LCD
- Operational current: 160mA@8.4V
- Operational voltage: 6.6-8.4v DC
- Battery Slot: 2 x 18350 (Not included)
- Supported protocols: ELRS
- Physical dimensions: 170*159*108mm
- Weight: 355gm
SKU: n/a -
Drone Kit, Drone Parts
RC Aeroplane Kit ( Motor + ESC + Propeller + Servo + TX-RX (FSI6))
This RC Aeroplane Kit includes almost all parts for the basic RC Aeroplane with 6ch RX TX. It includes everything to make and fly your own RC Aeroplane. This Kit Provides a FlySky FS-i6 RC Transmitter with Receiver,1000kv Brushless motor,30A Simonk ESC, TowerPro SG90 Servo Motor, and a 1045 Propeller pair(CW+CCW).
FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter with FS-iA6 Receiver is a great low-cost entry-level 6-channel 2.4 GHz Transmitter and Receiver that uses solid and reliable Automatic Frequency Hopping Digital System spread spectrum technology. It also comes with an FS-iA6 6-channel receiver. Suitable for controlling Quadcopters, Multirotor, Heli, and Airplane.
1000KV Brushless DC Motor is a brushless motor specifically made for RC planes, quadcopters, and multi-rotors. It is a 1000kV motor. It provides high performance, superpower, and brilliant efficiency.
30A Simonk ESC Electronic Speed Controller can drive motors that consume up to 30A current. It can be used to control our brushless motors with a 2S-3S LiPo. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules.
TowerPro SG90 Servo Motor is lightweight, high-quality, and lightning-fast. The servo is designed to work with almost all radio control systems. It is with excellent performance and high torque of 1.5 kg-cm gives you the freedom to use it for a variety of projects.
The 10×4.5 inch Propeller Pair (CW+CCW) is a set of counter-rotating RC aircraft propellers perfect for use in twin and multiple motor RC airplanes or coaxial RC helicopters. The length is 10 inches and the pitch is 4.5 inches per revolution.
SKU: n/a -
Drone Kit, Drone Parts
RC Aeroplane Kit ( Motor + ESC + Propeller + Servo + TX-RX)
This RC Aeroplane Kit includes almost all parts for the basic RC Aeroplane with 6ch RX TX. It includes everything to make and fly your own RC Aeroplane. This Kit Provides a FlySky CT6B 6CH Transmitter with FS-R6B Receiver, 1000kv Brushless motor, 30A Simonk ESC, TowerPro SG90 Servo Motor, and a 1045 Propeller pair(CW+CCW).
FlySky CT6B 6CH Transmitter with FS-R6B Receiver 2.4Ghz is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels.
1000KV Brushless DC Motor is a brushless motor specifically made for RC planes, quadcopters, and multi-rotors. It is a 1000kV motor. It provides high performance, superpower, and brilliant efficiency.
30A Simonk ESC Electronic Speed Controller can drive motors that consume up to 30A current. It can be used to control our brushless motors with a 2S-3S LiPo. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules.
TowerPro SG90 Servo Motor is lightweight, high-quality, and lightning-fast. The servo is designed to work with almost all radio control systems. It is with excellent performance and high torque of 1.5 kg-cm gives you the freedom to use it for a variety of projects.
The 10×4.5 inch Propeller Pair (CW+CCW) is a set of counter-rotating RC aircraft propellers perfect for use in twin and multiple motor RC airplanes or coaxial RC helicopters. The length is 10 inches and the pitch is 4.5 inches per revolution.
SKU: n/a -
(ESC) Drone Speed Controller, DIY Learning and Robot Kits, Drone Accessories, Drone Frame and Accessories, Drone Gimbal Accessories, Drone Parts, Uncategorized
RC Aeroplane Kit ( Motor + ESC + Propeller + Servo + TX-RX)
-57%
(ESC) Drone Speed Controller, DIY Learning and Robot Kits, Drone Accessories, Drone Frame and Accessories, Drone Gimbal Accessories, Drone Parts, UncategorizedRC Aeroplane Kit ( Motor + ESC + Propeller + Servo + TX-RX)
Package Includes:
1 x FLYSKY CT6B 6CH Remote Transmitter with Receiver
1 x A2212 1000KV Brushless Motor For RC Airplane / Quadcopter
1 x 30A Brushless ESC
1 x 1045 Propeller 10in 10×4.5 For Drone
4 x Tower Pro 9G Micro Servo Motor
SKU: n/a -
-
-
