Basic Electronic Components
Showing 601–624 of 919 results
-
Basic Electronic Components
LILYGO T-FPGA Development board
T-FPGA is an open-source FPGA development board. It is designed for FPGA and embedded system development with an Altera Cyclone IV FPGA, 32MB SDRAM, 8MB SPI Flash, and a MicroUSB port, among other features. Supporting multiple development environments such as Verilog and VHDL, the board is ideal for a wide range of applications such as robotics, automation, and IoT.
In addition, the FPGA is special because it has two chips, a wifi Bluetooth ESP32, and an FPGA chip.
Features:
- Equipped with a Field-Programmable Gate Array (FPGA) for flexible hardware programming.
- Designed as a development board for FPGA-related projects and experimentation.
- Suitable for a wide range of applications, from digital design to signal processing.
- Capable of high-speed processing and parallel execution of tasks.
- Multiple input/output interfaces for connecting peripherals and external devices.
- FPGA Chip: GW1NSR-LV4CQN48PC6/15
- Device: GW1NSR-4C
- The size of the flash memory is 256K
- The size of the PSRAM is 64M
- Provides a programmable platform for creating custom digital circuits.
- Integrated with necessary components like LEDs, buttons, and displays for testing and debugging.
- Accompanied by detailed documentation and resources for developers.
SKU: n/a -
Basic Electronic Components
LilyPad Buzzer
This LilyPad Buzzer is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: n/a -
Basic Electronic Components
LilyPad Tri-Color LED RGB Module for Arduino
LilyPad Tri-Color LED RGB Module for Arduino
This is LilyPad Tri-Color LED RGB Module for Arduino with you can blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color.
Very bright output. This is a common anode design – to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel.
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: n/a -
Basic Electronic Components
Limit Switch-WK1-G02
The “Limit Switch-WK1-G02” is a durable and versatile device commonly used in industrial automation. It offers precise switching capabilities to accurately detect the physical limits or positions of machinery. Built for reliability, it ensures safe and efficient operation in a wide range of manufacturing and production environments.
Features:
- Robust construction for durability in industrial settings
- Precise switching capabilities for accurate position detection
- Versatile functionality suitable for diverse automation applications
- Reliable performance ensures consistent operation
- Easy integration into machinery and equipment systems
- Enhanced safety features for industrial environments
- Designed for reliable performance in demanding manufacturing conditions
SKU: n/a -
Basic Electronic Components
Linear Bearing LMK12UU 12mm Square Flange Bushing
Product Description
Linear Bearing LMK12UU 12mm Square Flange Bushing is an economical linear motion system that allows unlimited travel along a cylindrical shaft.
These bearings have a small working load because the ball and the shaft only touch at a point. The balls can rotate with minimal friction, resulting in high-precision and smooth movement.
The universal Ball Bearings are ideal for replacing the damaged Ball Bearings in your devices to improve efficiency and save energy. They are widely used in home appliances, industrial, low noise and high-speed electric motors, construction machinery, automotive components, pumps, and machinery.
They offer smooth movement, low friction, high rigidity, and long life. They are also easy to maintain and replace.
SKU: n/a -
Basic Electronic Components
Linear Bearing LMK8LUU 8mm Square Flange Bushing
Product Description:
The Linear Bearing LMK8LUU 8mm Square Flange Bushing is an economical linear motion system that uses a cylindrical shaft.
The balls and the shaft have point contact, so the working load of these bearings is low. The balls can rotate with minimal friction, resulting in high-precision and smooth movement.
The Bearings provide a precise, safe and reliable linear motion system. They are commonly used in 3D printers and CNC (Computer Numerical Control) machines.
They are also widely used in home appliances, industrial, low-noise and high-speed electric motors, construction machinery, automotive components, pumps and machinery.
Features:
- Smooth moving
- Low friction
- High rigid
- Long life
- Economical and easy to maintain.
SKU: n/a -
Basic Electronic Components
Lithium Battery Explosion-Proof Bag/Protection Bag Size:65*50*95MM MOQ3
-56%
Basic Electronic ComponentsLithium Battery Explosion-Proof Bag/Protection Bag Size:65*50*95MM MOQ3
Lithium Battery Explosion-Proof Bag/Protection Bag Size:65*50*95MM MOQ3
Constructed from premium materials with robust tensile properties, this product excels in durability and eco-friendliness. It offers the secure method for charging and storing your lipo batteries, ensuring the safety of your workshop, family, and home against the potential hazards associated with lipo charging. Don’t overlook this excellent opportunity to enhance safety and reliability.
Features:
1. Made from the high-grade fire retardant material with strong tension, which makes it more durable and eco-friendly.
2. High temperature resistant, radiation protection and explosion-proof.
3. The hook and loop design is super-strong, which is easy and convenient to use.
4. This is a fireproof bag, which is designed to reduce damage in the event of a Lipo fire and to contain any fire caused by incorrectly charging or poorly functioning lipo packs.
5. The safest way to charge and store your lipo batteries and protect your workshop, family and home from the hazard of lipo charging.Bag Size:65*50*95MM
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
Lithium-Ion Battery Li-Ion 2200MAH 11.1V Rechargeable Battery 1C with BMS charge protection
-20%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsLithium-Ion Battery Li-Ion 2200MAH 11.1V Rechargeable Battery 1C with BMS charge protection
This battery pack provides a higher energy density per unit volume and unit weight. The offered battery pack is manufactured using high-grade components as well as pioneered technology under the strict supervision of adroit professionals. The provided battery pack is precisely examined by our quality auditors onset measures of quality to ensure its high functionality.
This battery can be directly connected with Arduino Uno.
Features:
- High performance and capacity
- High energy density.
- Excellent storage performance and low self-discharge rate
- Environmentally
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Flat top to suit many devices fitting.
Application:
- Portable equipment: POS, Portable printer, handset.
- Medical instrument: B ultrasound, Ecg monitoring instrument
- Military equipment: IR telescope
- Consumer electronics:PDA,MID,laptop,emergency light power source
- power tool e-bicycle
- Industrial and commercial instrument: light power meter, Gas testing instruments, fusion splicer, flaw detector
- Electric toy:RC car/ boat/helicopter
SKU: n/a -
Basic Electronic Components
LM10UU 10 MM Linear Motion Bearing
The LM10UU 10 MM Linear Motion Bearing is a device that enables precise, safe and reliable linear motion system. It is commonly used in 3D printers and CNC (Computer Numerical Control) machines. It can offer low friction motion along a single axis, which makes it suitable for various applications in DIY and robotics prototyping.
This LM10UU 10 MM Linear Motion Bearing is a closed type ball bushing with a 10mm bore and a 19mm outer diameter. It can be used in a mounted slide unit to carry components. It has standardized parts that are interchangeable, so you don’t have to worry about replacing any worn parts.
The linear motion ball bushing has a high-carbon chromium steel case for strength and rigidity, a synthetic resin retainer plate for accurate ball guidance and low noise. The universal ball bearings can be replaced easily if they are damaged, which can improve the efficiency and save the energy. The balls in the cage loop run along a smooth ball guide surface, which ensures low noise even at high-speed operation.
For reliable and smooth motion, the shaft that the linear motion bearings slide along must be lubricated. The quality of the shaft directly affects the quality of the linear motion. Therefore, using a chrome plated and hardened shaft may be beneficial.
Features :
- Outer Casing: Chromium Steel
- Low friction, optimum loading capacity, long life.
- It has linear bearing ball cage, hardened coat at both end rings.
- No worry if replacement of any worn part.
- Low noise even in high-speed operation.
SKU: n/a -
Basic Electronic Components
LM35D Analog Temperature Sensor Module without cable
s is LM35D Analog Temperature Sensor Module without cable
This LM35D Analog Temperature Sensor Module is based on the semiconductor LM35 temperature sensor. The LM35 Linear Temperature Sensor module is useful in detecting ambient air temperature. Sensitivity is 10mV per degree Celsius. The output voltage is proportional to the temperature.
LM35 is a precision IC temperature sensor with its output proportional to the temperature (in °C). The sensor circuitry is sealed and therefore it is not subjected to oxidation and other processes. With LM35, the temperature can be measured more accurately than with a thermistor!!!
SKU: n/a -
Basic Electronic Components
LM386MX-1/NOPB 700-mW, mono, 5- to 18-V, analog input Class-AB audio amplifier IC SMD-8 Package
-58%
Basic Electronic ComponentsLM386MX-1/NOPB 700-mW, mono, 5- to 18-V, analog input Class-AB audio amplifier IC SMD-8 Package
The LM386M-1 and LM386MX-1 are power amplifiers designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 increases the gain to any value from 20 to 200.The inputs are ground referenced while the output automatically biases to one-half the supply voltage. The quiescent power drain is only 24 mW when operating from a 5V supply.
Features :
Battery Operation
Minimum External Parts
Wide Supply Voltage Range: 5 V–18 V
Low Quiescent Current Drain: 4 mA
Voltage Gains from 20 to 200
Ground-Referenced InputSKU: n/a -
Basic Electronic Components
LM6LUU 6mm Bushing Longer Linear Ball Bearing
LM6LUU 6mm Bushing Longer Linear Ball Bearing
This LM6LUU 6mm Bushing Longer Linear Ball Bearing is an extended version of our standard LM6LUU linear slide bush that fits 6mm hardened steel shafts.
The Bearings provide a precise, safe and reliable linear motion system. They are commonly used in 3D printers and CNC (Computer Numerical Control) machines. This Linear Ball Bearing offers low friction motion along a single axis and has a wide range of applications in DIY and robotics prototyping.
This LM6LUU 6mm Bushing Longer Linear Ball Bearing is a closed type ball bushing with a 6mm bore and a 12mm outer diameter. It can be used in a mounted slide unit to carry components.
The balls in the cage loop run along a smooth ball guide surface to ensure low noise even at high speeds.
Since Linear Motion bearings slide along the round shaft, the shaft must be lubricated for reliable and smooth motion. The quality of the linear motion depends on the quality of the shaft. Therefore, using a chrome plated and hardened shaft may be beneficial.
The linear motion bearings is available in more varieties as below
LM8LUU
LM10LUU
LM12LUU
LM16LUUFeatures:
- Linear bearing ball cage, hardened coat of both ends ring.
- Made of carbon chromium bearing steel, safe and reliable.
- Ball in the cage loop to run a smooth ball guide surface to ensure stability even if high-speed.
SKU: n/a -
Basic Electronic Components
LM6UU 6 MM Linear Motion Bearing
The LM6UU 6 MM Linear Motion Bearing gives you very precise, safe and reliable linear motion system. Such linear motion bearings are mostly used in 3D printers and CNC(Computer Numerical Control) machines. An LM6UU 6 MM Linear Motion Bearing can provide low friction motion along a single axis, hence find a wide range of applications in DIY and robotics prototyping.
This LM6UU 6 MM Linear Motion Bearing closed type ball bushing has a 6mm bore and 12mm outer diameter is suitable for use in a mounted slide unit to carry components. These Bearings has various standardized parts which are interchangeable, so need no worry about replacement of any worn parts.
The linear motion ball bushing employs a high-carbon chromium steel case for strength and rigidity, a synthetic resin retainer plate for accurate ball guidance and low noise. The universal Ball Bearings is great for you to replace the damaged Ball Bearings in your devices for improving the efficiency and saving the energy. Balls in the cage loop run along a smooth ball guide surface to ensure low noise even in the high-speed operation.
Since Linear Motion bearings slide along the round shaft, for the reliable and smooth motion the shaft must be lubricated. The quality of the shaft directly influences the quality of linear motion we get. So, using chrome plated and hardened shaft may serve beneficial
SKU: n/a -
Basic Electronic Components
LM6UU 6 MM Linear Motion Bearing
Features :
- Outer Casing: Chromium Steel
- Low friction, optimum loading capacity, long life.
- It has linear bearing ball cage, hardened coat at both end rings.
- No worry if replacement of any worn part.
- Low noise even in high-speed operation.
SKU: n/a -
Basic Electronic Components
LM8UU 8 MM Linear Motion Bearing
The LM8UU 8 MM Linear Motion Bearing is a device that provides precise, safe and reliable linear motion along a single axis. It is commonly used in 3D printers and CNC (Computer Numerical Control) machines, as well as in DIY and robotics prototyping projects.
The LM8UU 8 MM Linear Motion Bearing consists of a high-carbon chromium steel case, a synthetic resin retainer plate and a set of balls that run along a smooth ball guide surface. The case has an 8mm bore and a 15mm outer diameter, and it can be mounted on a slide unit to support other components. The retainer plate ensures accurate ball guidance and low noise, even at high speeds. The balls reduce friction and increase efficiency and energy saving.
The LM8UU 8 MM Linear Motion Bearing is designed with standardized and interchangeable parts, so replacing any worn parts is easy and convenient. To maintain the optimal performance of the linear motion bearing, the shaft that it slides along should be lubricated regularly. The quality of the shaft also affects the quality of the linear motion, so using a chrome plated and hardened shaft is recommended.
Features :
- Outer Casing: Chromium Steel
- Low friction, optimum loading capacity, long life.
- It has linear bearing ball cage, hardened coat at both end rings.
- No worry if replacement of any worn part.
- Low noise even in high-speed operation.
SKU: n/a -
Basic Electronic Components, Electronic Components, IoT and Wireless
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
-48%
Basic Electronic Components, Electronic Components, IoT and WirelessLoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
- Module Model: LoRa-RA-02, Input Supply Range: 2.5 ~ 3.7VDC, Interface: SPI, Programmable bit Rate: UP to 300Kbps
- Antenna Type: IPEX, Frequency Range: 410-525 MHz, Transmit Power: 18±1 dBm (Max), Operating Temperature: -10 to 85°C, LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change, High sensitivity: down to -148dBm, Half-duplex SPI communication, Programmable bit rates up to 300kbps, Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes
- 127dB RSSI dynamic range, Automatic RF signal detection, CAD model, and very high-speed AFC, Packet engine with CRC up to 256 bytes, Small footprint dual-row stamp-hole patch package; Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
SKU: n/a -
Basic Electronic Components
LT-633(SPL-63) Stationary, Type Quick Connection, Terminal
LT-633(SPL-63) Stationary, Type Quick Connection, Terminal
It can be used to create the two-wire connection from two pair connections as shown in below Picture
PCT Spring Lever Connector contains a compact locking wire connector by a spring lever, which is used for single-strand hardwire with 0.08mm to 2.5mm2 area or soft wire with 0.08mm to 4.0mm2 area (or AWG28 to AWG12). This connector can tolerate the rated voltage up to 600V with an electric current peak of 32A, resulting in a maximum of 7KW Power. And the Stripping Length of the connector is 11-12 mm
SKU: n/a -
Basic Electronic Components
luminum GT2 Timing Pulley 20 Tooth 8mm Bore For 6mm Belt
This is Aluminum GT2 Timing Pulley 20 Tooth 6.35mm Bore For 6mm Belt. For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only – MXL belts will slip due to the different tooth profiles.
This pulley has 20 teeth and a 6.35mm inner bore. Two set screws can be used to attach it firmly to any 6.35mm diameter shaft. Full aluminum construction means these are very light and very durable.
SKU: n/a -
Basic Electronic Components
M3*30MM Male to Female Nylon Hex Spacer-(Pack of 10)
M3*30MM Male to Female Nylon Hex Spacer-(Pack of 10)
Elevate and securely mount your PCB with our M3*30MM Male to Female Nylon Hex Spacer (Pack of 10). These versatile standoffs are designed to provide a stable mounting solution for your PCB while offering ample space for airflow, making them perfect for a variety of applications including inside computer chassis, Quadcopter frames, Motor Driver Bodies, and DIY projects.
Crafted from high-quality brass, our nylon spacers boast anti-corrosion and anti-rust properties, ensuring durability and longevity. Their threaded hexagonal column design makes installation a breeze, allowing for easy segregation of boards.
Features:
- Excellent strength and durability
- Fine finish for a professional look
- Sturdy construction for reliable performance
- Versatile design for a wide range of applications
- Securely locks PCB into place
- Hexagonal design allows for easy tightening with a wrench
Enhance the stability and airflow of your projects with our M3*30MM Male to Female Nylon Hex Spacer (Pack of 10). Please note that the product images may vary slightly from the actual product in terms of color tone.
SKU: n/a -
Basic Electronic Components
M6 Pneumatic Push in Bowden Extruders with 4*2mm Tube
he PC4-M6 Pneumatic Push-in Bowden Extruder for 4mm J-Head fitting is an essential component for 3D printers using 1.75mm filament in Bowden-style extruder assemblies. It connects PTFE tubing to the extruder, allowing for a smooth and reliable path for the filament to reach the hot-end assembly. This connector is compatible with standard 4mm ID PTFE tubing and features a universal M6 thread that fits most extruder fittings. By ensuring that the filament travels safely and efficiently, this connector improves print quality and consistency.
The PC4-M6 Bowden connector uses a John Guest fitting, which secures the tubing with tension, ensuring a firm grip and minimizing the risk of any disruptions in filament flow. Its high corrosion resistance and compatibility make it a popular choice for Bowden-style extruders, contributing to longer-lasting, reliable 3D printing.
SKU: n/a -
Basic Electronic Components
M6 Thread Brass Nozzle V5 V6 UM Compatible – 1.75mm x 0.4mm (for 3D printer)
-57%
Basic Electronic ComponentsM6 Thread Brass Nozzle V5 V6 UM Compatible – 1.75mm x 0.4mm (for 3D printer)
This 3D Printers Brass Nozzle 0.4mm is a fully functional metal extruder, backwards compatible with all 3d printer is basically a high-end dual extrusion system, using two interchangeable nozzles.
You can use two different wires in the same print job and be able to do their own level, and regardless of which side printing heat will not appear other double extruder 3D printer rubs and other common problems.
SKU: n/a -
Basic Electronic Components
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.4mm (for 3D printer)
-35%
Basic Electronic ComponentsM6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.4mm (for 3D printer)
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.4mm (for 3D printer)
Whether you want to print fine details or large parts, you can find the right V6 M6 Thread Brass Nozzle for your 3D printer at robu.in. These nozzles are part of the V6 ecosystem of 3D printer parts and work with V6, Lite6, and Titan Aero. They also fit Prusa 3D printers.
These nozzles have an optimized internal geometry that reduces back-pressure and allows a smooth and easy flow of filament. They also enhance the retraction performance.
The tip of the nozzle has a flat surface that flattens the layer as it prints. The size of the tip is customized for each nozzle size. A small tip gives you high precision and a large tip helps you print smoother larger layers.
You can easily identify each nozzle in the series by the markings on the hex head flats. See the table on the left for reference.
SKU: n/a -
Basic Electronic Components
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.6mm (for 3D printer)
-51%
Basic Electronic ComponentsM6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.6mm (for 3D printer)
If you want to print fine details or large parts with your 3D printer, you can use the V6 M6 Thread Brass Nozzle range from robu.in. These nozzles are compatible with V6, Lite6, and Titan Aero 3D printer parts. You can also use them with Prusa 3D printers.
These nozzles have a M6 thread and fit any 3D printers that use the V6 ecosystem, including Prusa i3 and i3 MK2 models. They have an optimized internal geometry that reduces back-pressure and allows a smooth and easy flow of filament. They also improve the retraction performance.
The tip of the nozzle has a flat surface that flattens the layer as it prints. The size of the tip is custom machined for each nozzle size. A small tip gives you high precision and a wide tip helps you print larger layers smoothly.
You can easily identify each nozzle in the series by the markings on the hex head flats. See the table on the left for reference.
SKU: n/a
