Electronic Components
Showing 337–360 of 1177 results
-
Basic Electronic Components
500 MM long Chrome Plated Smooth Rod Diameter 8 MM
500 MM long Chrome Plated Smooth Rod Diameter 8 MM used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.
In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.
After rigorous inspection, the last important thing is safe packing. Anti-rust oil is to be sprayed on the rod surface and each rod is to be packed in a paper sleeve and then in the wooden box.
Features:
- High precision, high hardness, high stability.
- Strictly control every precision process to ensure quality.
- Simple design, durable material, high temperature preheat treatment, accurate outer hole size.
- Due to its moderate hardness, it has been applied in many fields.
- Made of stainless steel, high corrosion resistance, high strength and wear resistance to maintain its efficient operation
SKU: n/a -
Basic Electronic Components, Uncategorized
50cm USB 2.0 B Female Socket, Printer To B Male Plug Panel Mount, Extension Cable
-63%
Basic Electronic Components, Uncategorized50cm USB 2.0 B Female Socket, Printer To B Male Plug Panel Mount, Extension Cable
This is an extension cable USB 2.0 type B usually used for printers. This extension cable has a straight USB type B male Pin at one end and a Panel mountable USB type B female connector for USB 2.0 Type B
Note: The mountable end of the cable need M3 size bolt (not included) if mounting is required.
- USB B Type Male to Female extension cable with screws for Panel Mount 50cm
- One Side: Male USB B Type
- The Other Side: Panel mount USB B female
- With 28AWG+Braid Cable
- Cable length about: 50cm
- Fitting Screw size: M3
- Can work for Printer Scanner & Hard Disk extension
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
510R 0603 SMD Resistor (Pack of 20)
-40%
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor510R 0603 SMD Resistor (Pack of 20)
This is RC0603FR-07510RL – 510R 1% 100mW 0603 Thick Film Chip Resistor. The RC series is highly reliable electrode construction and is suitable for all general purpose applications, such as smartphones, tablets, laptops, televisions, etc.
Features:
- Highly reliable electrode construction
- Compatible for all soldering processes
- Highly stable in auto-placement surface mounting application
- Barrier layer end termination
SKU: n/a -
-
Basic Electronic Components, Electronic Components, Wire Wound Inductors
5254-RC-Axial Power Inductor
-14%
Basic Electronic Components, Electronic Components, Wire Wound Inductors5254-RC-Axial Power Inductor
5254-RC-Axial Power Inductor
Note:
- Product Images are shown for illustrative purposes only and may differ from the actual product.
- For Technical Specifications about the IC go through the Datasheet in the Attachment section.
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
5258-RC-Axial Power Inductor
-14%Basic Electronic Components, Electronic Components, Wire Wound Inductors5258-RC-Axial Power Inductor
5258-RC-Axial Power Inductor
Note:
- Product Images are shown for illustrative purposes only and may differ from the actual product.
- For Technical Specifications about the IC go through the Datasheet in the Attachment section.
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
5800-101-RC-Axial Power Inductor
-20%
Basic Electronic Components, Electronic Components, Wire Wound Inductors5800-101-RC-Axial Power Inductor
5800-101-RC-Axial Power Inductor
Note:
- Product Images are shown for illustrative purposes only and may differ from the actual product.
- For Technical Specifications about the IC go through the Datasheet in the Attachment section.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor
5800B Light Dependent Resistor (LDR) White Color
-30%
Basic Electronic Components, Electronic Components, Resistor5800B Light Dependent Resistor (LDR) White Color
The 5800B Light Dependent Resistor (LDR) White Color is a photoresistor (or light-dependent resistor, LDR, or photo-conductive cell). Which is a light-controlled variable resistor. The resistance of a photoresistor decreases with increasing incident light intensity; in other words, it exhibits photoconductivity. A photoresistor is made of a high resistance semiconductor.
Photoresistors are Semiconductor devices that use light energy to control the flow of electrons, and hence the current flowing through them. When the light level decreases, the resistance of the LDR increases. As this resistance increases in relation to the other Resistor; which has a fixed resistance, it causes the voltage dropped across the LDR to also increase. When this voltage is large enough (0.7V for a typical NPN Transistor), it will cause the Transistor to turn on.
when the light falls on its surface, then the material conductivity reduces and also the electrons in the valence band of the device are excited to the conduction band.
Note: Color of product may vary, you may get available color.
Features :
- Dark resistance:> 200 MΩ, corresponding to dark current.
- Light Resistance: <2.4KΩ, corresponding to light current.
- High sensitivity.
- The current = Light current – dark current.
- Diameter: 5mm.
SKU: n/a -
Basic Electronic Components
5A Constant Current / Voltage LED Drives Lithium Battery Charging Module
-63%
Basic Electronic Components5A Constant Current / Voltage LED Drives Lithium Battery Charging Module
This Buck converter can be used as a normal step-down module with overcurrent protection capability for various applications. It is used as a charger for various voltage lithium batteries, batteries, nickel-cadmium nickel-hydrogen batteries (battery packs), for solar panels, wind turbines, etc. This buck converter can also be used as a high-power LED driver module.
The module comes with two modes of constant voltage and constant current, and there are indicators to indicate which mode the module is currently in. When used as a lithium battery charger, you can set the float voltage and charge current to show it is charging or already full. With current limiting protection, the module will not burn out even if the output is short-circuited.
Note: The capacitor component’s voltage & capacitance parameters may vary as per circuit design.
SKU: n/a
