Electronic Components
Showing 433–456 of 483 results
-
Basic Electronic Components, Electronic Components, IoT and Wireless, Uncategorized
RF434 Transmitter Receiver Wireless Module
-58%
Basic Electronic Components, Electronic Components, IoT and Wireless, UncategorizedRF434 Transmitter Receiver Wireless Module
- Range in Open Space(m) : 30m
- Transmitter Frequency Range(MHz) : 433.92
- Receiver Frequency Range(MHz): 433
- Sensitivity :105 dBm
- This hybrid 433Mhz RSI Wireless Transmitter Receiver Module provides a complete RF transmitter and receiver module solution which can be used to transmit data at up to 3KHz from any standard CMOS/TTL source
SKU: n/a -
Basic Electronic Components
RGB 3 Color LED Module For Arduino Red Green Blue
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Notice that you do not need to use limiting resistors since they are already included on the board.
Features:
- The use of plug-in full-color LED.
- RGB trichromatic limiting resistor to prevent burnout.
- Compatible with Arduino DIY project
- With a variety of single-chip interface.
- Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Package included:
1xRGB 3 Color LED Module
SKU: n/a -
-
-
-
-
Electronic Components
SMA Female Connector Right Angled Through-Hole for PCB Mount
- Impedance：50 ohm
- Frequency Range: 0~6 GHz
- VSWR: Straight type ≦ 1.3max / R/A type ≦ 1.5max
- Dielectric Withstanding Voltage:1000 V rms min for RG142, RG405
750 V rms min. for RG316, RG402
500v rms min. for RG178 - Working Voltage: 500 V rms max. for RG142, RG405
375 V rms max. for RG316, RG402
170 V rms max. for RG178
SKU: n/a -
-
Basic Electronic Components, Electronic Components, PCB Adapter
SOIC/SSOP TO DIP 20 PIN Adapter-2pcs
-33%
Basic Electronic Components, Electronic Components, PCB AdapterSOIC/SSOP TO DIP 20 PIN Adapter-2pcs
SOIC/SSOP TO DIP 20 PIN Adapter is a Perfect for use with Arduino / Raspberry Pi or any microcontroller. This is a Double-Side PCB Circuit Board, Each PCB board has 20 pins. A side for pin pitch size 1.27mm, It can be used for most of the SO20, SOP20, SOIC20 to 2.54mm DIP. B side for pin pitch size 0.65mm, It can be used for most of the SSOP20, TSSOP20, MSOP20 to 2.54mm DIP.
8-Pin SOIC/SSOP to DIP Adapter is a small PCB that lets you adapt SOIC/SSOP packages into a DIP footprint. These are useful for modding and upgrading devices that use 8-pin DIP ICs, when the upgraded IC is only available in a SOIC/SSOP footprint. You can also use it for prototyping, to make SOIC/SSOP packages compatible with solderless breadboards.
The PCB board mounting 2.54mm pitch Pin Header, It can be plugged directly into 2.54mm pitch PCB board, breadboard, and 600mil width 20 pin DIP socket.
Features:
- Tiny size
- 8 pin
- SOIC/SSOP to adapter.
Package Includes:
1 x SOIC/SSOP TO DIP 20 PIN Adapter-2pcs
SKU: n/a -
-
-
Basic Electronic Components, Electronic Components, PCB Adapter
SOP16 SOP28 TO DIP16 DIP28 PCB Adapter
-38%
Basic Electronic Components, Electronic Components, PCB AdapterSOP16 SOP28 TO DIP16 DIP28 PCB Adapter
This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that you need not buy the DIP chips for prototyping especially. Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping. It can be used repeatedly also.
Specification:
- Board Color: Yellow.
- Pitch Patch: 0.4 mm.
Package Includes:
1 x SOP16 SOP28 TO DIP16 DIP28 PCB Adapter.
2 x Burg connector.
SKU: n/a -
Electronic Components
Sop16 Sop28 To Dip16 Dip28 Pcb Adapter
This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that You need not to buy the DIP chips for prototyping especially.Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
SOP16 Transfer to DIP16 IC Adapter Converter Adapter Plate (Pack of 5)
-29%
Basic Electronic Components, Electronic Components, PCB AdapterSOP16 Transfer to DIP16 IC Adapter Converter Adapter Plate (Pack of 5)
This is a SOP16 Transfer to DIP16 IC Adapter Converter Adapter Plate. Just solder the SMD chips on the board and plug them into the breadboard will make it convenient to do prototyping. It can be used repeatedly also.
Note: Package includes one Quantity of SOP16 Transfer to DIP16 IC Adapter in the image shows both sides of Adapter
Specification:
- Board Color: Yellow.
- PCB Dimensions (L x W x H mm: 21.5 x 16 x 1.5
- Pitch: 0.4 mm.
Package Includes:
1 x SOP16 Transfer to DIP16 IC Adapter Converter Adapter Plate (Pack of 5)
SKU: n/a
