Electronic Components
Showing 529–552 of 1177 results
-
Basic Electronic Components
CNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
-49%
Basic Electronic ComponentsCNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
CNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Presenting the CNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board, a versatile tool that enables your Arduino to build a variety of devices, including engraving machines, 3D printers, and mini CNCs.
This shield is designed for easy integration, plugging directly into your Arduino board and removing the need for separate wiring and connections. It offers four slots for stepper motor drive modules, with each slot capable of managing one stepper motor. You can control each stepper motor using just two IO pins on the Arduino.
Building your own CNC engraving machine is straightforward – simply connect the Arduino CNC Shield V3 to an Arduino UNO and upload the GRBL firmware. This powerful expansion board unleashes the potential of your Arduino, opening up a world of possibilities in fabrication and automation projects.
SKU: n/a -
Basic Electronic Components
CNHL 8000mAh 11.1V 3S 30C Lipo Battery with XT90 Plug
The CNHL 8000mAh 11.1V 3S 30C LiPo battery with XT90 plug is a high-capacity battery suitable for a wide range of RC applications, particularly those requiring extended flight or operation times. Here are its specifications:
- Capacity: 8000mAh (milliampere-hour) indicates the amount of charge the battery can hold. With its high capacity, this battery is well-suited for powering large drones, RC airplanes, boats, and other hobby-grade vehicles that require long run times.
- Voltage: 11.1V (volts) refers to the nominal voltage of the battery. This is a 3-cell battery pack, with each cell having a nominal voltage of 3.7V. When combined in series, they sum up to 11.1V.
- Discharge Rate (C-Rating): 30C indicates the discharge rate of the battery. The “C” rating represents the maximum continuous discharge rate relative to the capacity of the battery. In this case, it can provide a continuous discharge rate of up to 30 times its capacity (8000mAh), which is 240A (amps). While not as high as some other batteries, this C-rating is still sufficient for many applications, especially those that prioritize capacity over instantaneous power delivery.
- Plug Type: XT90 plug is a common and reliable connector used in RC applications. It’s known for its ability to handle high currents without overheating and is widely compatible with various RC models and accessories.
SKU: n/a -
Basic Electronic Components
CNHL Black Series 5000mAh 11.1V 3S 40C Lipo Battery with XT60 Plug
The CNHL Black Series 5000mAh 11.1V 3S 40C LiPo battery with XT60 plug is a popular choice among RC enthusiasts, particularly for use in drones, RC cars, boats, and other hobby-grade vehicles. Here’s some information about this battery:
- Capacity: 5000mAh (milliampere-hour) indicates the amount of charge the battery can hold. In practical terms, this means it can deliver a higher amount of current over a longer period compared to lower-capacity batteries.
- Voltage: 11.1V (volts) refers to the nominal voltage of the battery. This is a 3-cell battery pack, with each cell having a nominal voltage of 3.7V. When combined in series, they sum up to 11.1V.
- Discharge Rate (C-Rating): 40C indicates the discharge rate of the battery. The “C” rating is a measure of how much current the battery can deliver in relation to its capacity. In this case, it can provide a continuous discharge rate of up to 40 times its capacity (5000mAh), which is 200A (amps).
- Plug Type: XT60 plug is a common type of connector used in RC applications. It’s known for its reliability and ability to handle high currents without overheating.
SKU: n/a -
-
-
Basic Electronic Components
CSR8635 Bluetooth 4.0 Stereo Audio Receive Board Speaker Module
CSR8635 Bluetooth 4.0 Stereo Audio Receive Board Speaker Module
CSR8635 Bluetooth 4.0 is a module that receives stereo audio and sends it to a speaker. It is based on the CSR BC8 chip BC8635, which integrates most of the Bluetooth peripheral components and optimizes the RF and audio performance. The module provides an easy-to-use solution for designing Bluetooth products. It can be used for applications such as Bluetooth speakers, car kits, headsets, etc.
Note:
- Audio output module for differential output, can not be directly connected with an amplifier, the circuit needs into the nondifferential signal, of course, if amplifier support can be directly connected with an amplifier IC.
- The module of the software has two kinds, one kind is the key to boot, suitable for battery-powered occasions; one is electrically powered, adapted to the ordinary power supply occasions to use the kind of software, please note.
- The module requires knowledge of iron welding technology and electronic technique, if does not have this condition, is likely to be a good module to your hand will become a waste, please take caution.
- A voltage of IO the highest resistance to 1.8V module only, more than 1.8V burning module may, please note.
- Bluetooth modules are very sensitive to static and electric leakage, please use the constant temperature soldering iron.
SKU: n/a -
Basic Electronic Components
CYCLONE Nano 2400RX ExpressLRS radio receiver
CYCLONE Nano 2400RX ExpressLRS radio receiver
Introducing the CYCLONE Nano 2400RX ExpressLRS Radio Receiver, an advanced receiver module designed for long-range telemetry transmission in FPV drones and RC aircraft. The Nano 2400RX receiver is equipped with a power amplifier (PA+LNA), providing a telemetry output of 100mW and enhanced sensitivity for extended range communication. It features the IPEX1 antenna base and includes a dipole T-type antenna for optimal signal reception.
Compact and lightweight, the Nano 2400RX module measures just 11x18x3mm and weighs a mere 3 grams. It features an IPEX1 antenna plug and comes with a dipole T-type antenna for immediate use. The module includes four soldering pads for easy integration: GND, VCC, TX, and RX.
SKU: n/a -
Basic Electronic Components
DC – DC 6-24V to 5V USB Output Step Down Power Charger with Adjustable Buck Converter
-58%
Basic Electronic ComponentsDC – DC 6-24V to 5V USB Output Step Down Power Charger with Adjustable Buck Converter
DC – DC 6-24V to 5V USB Output Step Down Power Charger with Adjustable Buck Converter
This USB Output Step Down Power Charger accommodates a 6-24V voltage input and delivers a 5V 3A output, complete with input polarity reverse protection, output overvoltage protection, and short circuit protection.
Utilizing synchronous rectification technology, it achieves an ultra-high power conversion efficiency of up to 97.5%, maximizing the use of the input power. The onboard female type A USB port, equipped with an identification circuit, is ideally suited for iPhones, iPads, and Android smartphones. It is also capable of powering or recharging any electronic device that requires a 5V input power at currents up to 3A.
SKU: n/a -
Basic Electronic Components
DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
-59%
Basic Electronic ComponentsDC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
The DC 12V Switch Delay Relay Module features an adjustable delay time of 0 to 25 seconds and is based on the NE555 Timer IC, designed for high-performance timing applications. It includes a power indicator LED and timing indication LEDs for clear visual feedback.
This versatile module is suitable for various applications, including vehicle equipment, where it can delay ignition to prevent high surge currents that may damage components.
Operating as a monostable generator, the NE555 integrated circuit allows for adjustable delay times from 0 to 10 seconds, which can be configured using a potentiometer or by changing the capacitor values. It can control devices up to 220V and 10A.
The NE555 is renowned for its stability in generating accurate time delays and oscillations. It provides terminals for triggering or resetting as needed. In delay mode, timing is precisely managed by an external resistor and capacitor. For stable oscillation, the free-running frequency and duty cycle are controlled by two external resistors and one capacitor. The circuit can be triggered and reset with falling waveforms, and the output can source or sink up to 200mA, making it compatible with TTL circuits.
SKU: n/a -
Basic Electronic Components
Desoldering Wick
Solder wick is composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process.We tried a lot of cheaper solder wick before finding this supplier. This is a cheaper version of the wick we use. We may start using it actually. It works great and the price is awesome.Features:
- Material: 100% Copper
- Useful for Faster and Cleaner electronics Desoldering work
- Thickness: Comfortable for Desoldering
- RMA Coated Wick
- length : 1feet
Package Includes:1 x Desoldering WickSKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012F-1R0M=P2 Wire Wound Inductors
-33%
Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012F-1R0M=P2 Wire Wound Inductors
DFE252012F-1R0M=P2 Wire Wound Inductors
Features:
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012PD-1R0M P2 Wire Wound Inductors
-33%Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012PD-1R0M P2 Wire Wound Inductors
Wirewound Inductor, 1 µH, 0.042 ohm, 3.2 A, DFE252012P_D
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012PD-R47M P2 Wire Wound Inductors
-33%Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012PD-R47M P2 Wire Wound Inductors
DFE252012PD-R47M P2 Wire Wound Inductors 470 nH, 0.027 ohm, 4 A, DFE252012P_D
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components
DHT22 Digital Temperature and Humidity Sensor-Standard Quality
DHT22 Digital Temperature and Humidity Sensor-Standard Quality
The DHT22 Digital Temperature and Humidity Sensor (Standard Quality) is an affordable, easy-to-use sensor that measures both temperature and humidity. It utilizes a capacitive humidity sensor and a thermistor to detect environmental conditions, outputting a digital signal on the data pin—no need for analog input.
While the sensor is straightforward to use, it requires careful timing to read the data. One limitation is that you can only retrieve new data every 2 seconds, meaning sensor readings may be up to 2 seconds old when using the provided library.
To use the DHT22, simply connect the leftmost pin to a 3-5V power source, the middle pin to your data input, and the rightmost pin to ground. Although it sends data via a single-wire connection, it is not compatible with Dallas One Wire protocol. If you plan to use multiple sensors, each one must have its own dedicated data pin.
SKU: n/a -
