Electronic Components
Showing 577–600 of 1177 results
-
Basic Electronic Components
E18-D80NK NPN- NO Adjustable IR Sensor Proximity Switch 3-80cm Range
-52%
Basic Electronic ComponentsE18-D80NK NPN- NO Adjustable IR Sensor Proximity Switch 3-80cm Range
E18-D80NK NPN- NO Adjustable IR Sensor Proximity Switch 3-80cm Range
The E18-D80NK NPN-NO Adjustable IR Sensor Proximity Switch offers a compact solution by combining both a transmitter and receiver into a single photoelectric switch sensor. With an adjustable detection range of 3 to 80 cm, it provides flexibility for various applications. This versatile, cost-effective, and user-friendly sensor is perfect for tasks such as robot obstacle avoidance, interactive media systems, and industrial assembly lines.
The sensor outputs a switching signal that changes based on the presence of obstacles: it remains high when no obstacles are detected and switches low upon detection. Equipped with a bright light positioned behind the probe, it efficiently identifies objects within its 3 cm to 80 cm detection range.
Connections: –
- Red wire: 5V
- Green wire: GND
- Yellow wire: Digital output
OR
- Brown wire: 5V
- Blue wire: GND
- Black wire: Digital output.E18-D80NK NPN- NO Adjustable IR Sensor Proximity Switch 3-80cm Range
The E18-D80NK NPN-NO Adjustable IR Sensor Proximity Switch offers a compact solution by combining both a transmitter and receiver into a single photoelectric switch sensor. With an adjustable detection range of 3 to 80 cm, it provides flexibility for various applications. This versatile, cost-effective, and user-friendly sensor is perfect for tasks such as robot obstacle avoidance, interactive media systems, and industrial assembly lines.
The sensor outputs a switching signal that changes based on the presence of obstacles: it remains high when no obstacles are detected and switches low upon detection. Equipped with a bright light positioned behind the probe, it efficiently identifies objects within its 3 cm to 80 cm detection range.
Connections: –
- Red wire: 5V
- Green wire: GND
- Yellow wire: Digital output
OR
- Brown wire: 5V
- Blue wire: GND
- Black wire: Digital output.
SKU: n/a -
Basic Electronic Components
E9 Dear Beacon
troducing the E9 Dear Beacon, a versatile and user-friendly device designed for various tracking and monitoring applications. With its smart rotatable mechanical design, the E9 allows for easy replacement of the coin battery, ensuring continuous functionality.
Designed to withstand humid conditions, the E9 features IP67 waterproofing, making it suitable for both indoor and outdoor use. It can be securely attached to objects using screws or double-sided adhesive, enabling remote data management for tasks such as location tracking, activity monitoring, and asset tracking.
Features:
- Real-Time Movement Monitoring: Equipped with a built-in accelerometer sensor for accurate movement tracking.
- Easy Operation: Simple to turn on and off with a long press, ensuring convenient usage.
- Internal Button: Includes an internal push button to prevent accidental activation or deactivation.
- Long Service Lifetime: Offers up to 18 months of battery life, with a replaceable coin battery for extended usage.
Enhance your tracking and monitoring capabilities with the E9 Dear Beacon, providing reliable performance and long-lasting battery life for your applications.
SKU: n/a -
Basic Electronic Components
Embeddinator Blue Color Sensor Module
Embeddinator Blue Color Sensor Module
Introducing the Embeddinator Blue Color Sensor Module, proudly made in India by EnGeniusLab. This innovative color sensor module is designed to enhance your projects with precise color detection capabilities.
Equipped with a photodiode operating in 4-bit mode, this sensor module delivers analog values, allowing you to accurately detect colors. By leveraging four individual values and calculating their average, the module effectively determines the unique value associated with each color.
Product Details:
- Type:Â Color sensor
- Part Number:Â Color sensor
- Brand:Â Embeddinator
- Sensor Type:Â Analog
- Usage/Application:Â Object Detection
SKU: n/a -
Basic Electronic Components
ePLA-Silk Magic Filament, 1.75mm, Green Blue, 1kg/roll, with Paper Roll
-63%
Basic Electronic ComponentsePLA-Silk Magic Filament, 1.75mm, Green Blue, 1kg/roll, with Paper Roll
When the model printed with dual color pla filament is rotated, it has a dynamic appearance brought by two different colors. Compared with other materials,ePLA-Silk Magic is easier to peel off, and the surface is smooth and flat; This magic pla filament is an upgrade based on PLA and has the same quality of easy printing.
Note:
- It can be used with the eBOX Lite to keep the spool rolling smoothly without shaking to avoid twisting and color changing.
- Reduce the overhang angle structure in the model when printing or slower the printing speed when you use ePLA-Silk Magic.
Features:
- Smooth and glossy surface
- High-quality PLA material
- Compatible with most 3D printers
- Includes Paper Roll for storage
- Ideal for artistic prints
SKU: n/a -
Basic Electronic Components
eSilk-PLA filament Rainbow Multicolor
As the latest product of eSUN, eSilk-PLA filament Rainbow Multicolor is modified by adding materials with bright effect materials into PLA to make them shinier in appearance. eSilk-PLA is similar to PLA filament, with good mechanical properties and good toughness. It is environmentally friendly and non-toxic. Compared with the traditional PLA, the silk high-gloss material has a bright, silky luster.
Silk high-light PLA printing materials can be widely used in large curved surface models and practical products, such as furniture accessories, decoration, outdoor decoration, and other fields. Due to its good printing performance and excellent finished product appearance, the product received increasing attention in the global market once launched.
Printing Settings:
- Printing Temp: 190-220℃
- Bed Temp: No need heating or heat to be 60-80℃
- Print Speed : Â 20-100mm/s
- Move Speed : Â 90-155mm/s
Features:
- Great bio-compatibility, excellent transparency and environment-friendly
- Low shrinkage, good round shape
- Accurate diameter (±0.02mm)
- High gloss,catch yo ur eyes
- Easy to print with stable printing performance
- Various colors are available
- 100% bio-degradable and FDA food safety approved
- Silk-like appearance
- Glossy surface and silk-like smooth texture
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- Low material shrinkage rate, uniform diameter
SKU: n/a -
Basic Electronic Components
ESP8266 I/O Lead Out Adapter Plate Expansion Module for ESP-07 ESP-12E
-50%
Basic Electronic ComponentsESP8266 I/O Lead Out Adapter Plate Expansion Module for ESP-07 ESP-12E
Product Description
The ESP8266 Serial Wireless Wi-Fi Module Adapter Plate is designed for use with the ESP-07, ESP-08, and ESP-12E SMD ESP8266 modules. This adapter plate makes it easy to connect these Wi-Fi modules to your project. The ESP8266 module can be soldered onto the PCB, and the adapter provides clearly labeled headers for easy connection.
This adapter is perfect for quickly integrating an ESP-12 module into your breadboard setup. The pins are spaced at standard 0.1″ intervals, and the male header pins are fully compatible with the ESP-12F module, making it a versatile and convenient solution for your ESP8266-based projects.
Feature
- It has a reserved land pattern for a 3.3V regulator.
- Pinouts in black colour are on the upper layer.
SKU: n/a -
Basic Electronic Components
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
-60%
Basic Electronic ComponentsESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
The ESP8266/ESP-12F WiFi Module (Witty Cloud Development Board + Mini NodeMCU) is an affordable, compact WiFi transceiver that offers an ideal solution for Home Automation and IoT applications. It serves as a great alternative to the NRF24L01, providing direct communication with your WiFi router via UART (Rx, Tx) from an MCU.
The ESP-12F module is one of the most feature-rich in the ESP family, offering a wide range of available pins for versatile project designs. It can be programmed to run standalone using the Arduino IDE or with LUA scripting through NodeMCU. The board comes equipped with an LDR (Light Dependent Resistor) and an onboard WS2812 RGB LED, making it ready for various projects. Additionally, it includes a CH340 micro USB module for easy programming.
The ESP8266 chip is highly integrated, incorporating an onboard antenna and power management converter. It is optimized for energy-efficient VoIP applications, with fast switching between sleep and wake modes, adaptive radio bias, and front-end signal processing for low-power operation.
SKU: n/a -
Basic Electronic Components
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
-47%
Basic Electronic ComponentsESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
The ESP8266/ESP-12F WiFi Module (Witty Cloud Development Board + Mini NodeMCU) is an affordable, compact WiFi transceiver that offers an ideal solution for Home Automation and IoT applications. It serves as a great alternative to the NRF24L01, providing direct communication with your WiFi router via UART (Rx, Tx) from an MCU.
The ESP-12F module is one of the most feature-rich in the ESP family, offering a wide range of available pins for versatile project designs. It can be programmed to run standalone using the Arduino IDE or with LUA scripting through NodeMCU. The board comes equipped with an LDR (Light Dependent Resistor) and an onboard WS2812 RGB LED, making it ready for various projects. Additionally, it includes a CH340 micro USB module for easy programming.
SKU: n/a -
Basic Electronic Components
Espressif ESP32-WROOM-32 4M 32Mbit Flash WiFi Bluetooth Module
Espressif Systems’ ESP32-WROOM-32 MCU Modules are powerful and adaptable Wi-Fi/BT/BLE modules suitable for a range of applications. They are capable of handling tasks ranging from simple sensor networks to complex voice encoding, music streaming, and MP3 decoding.
At the heart of these modules is the ESP32-D0WD chip, featuring two independently controllable CPU cores with adjustable clock frequencies from 80MHz to 240MHz. The chip also boasts a comprehensive set of peripherals, including capacitive touch sensors, Hall sensors, an SD card interface, Ethernet, high-speed SPI, UART, I2S, and I2C.
The ESP-32S Wifi Bluetooth combo module provides SDK Firmware for rapid online programming and open-source GCC-based toolchains for development support. It’s ideal for a variety of low-power IoT applications such as sensor hubs, loggers, video streaming, Wi-Fi & Bluetooth devices, home automation, and mesh networks, targeting makers, hardware engineers, software engineers, and solution providers.
SKU: n/a -
Basic Electronic Components
Espressif ESP32-WROOM-32E 8M 64Mbit Flash WiFi Bluetooth Module
he Espressif ESP32-WROOM-32E stands as a versatile Wi-Fi+BT+BLE MCU module, catering to an extensive spectrum of applications. From power-efficient sensor networks to high-demanding operations like voice encoding, music streaming, and MP3 decoding, its capabilities span across diverse fields.
Embedded with a PCB antenna, the ESP32-WROOM-32E ensures seamless Bluetooth and Wi-Fi connectivity, facilitating effortless communication in various environments. Enhanced by a 4 to 16 MB external SPI flash, these modules empower developers with ample storage for data and program memory, fostering innovation and flexibility in application development.
With its compact yet robust design, the ESP32-WROOM-32E emerges as a cornerstone for IoT solutions, enabling the creation of smart devices and systems that seamlessly integrate into the connected world. From smart homes to industrial automation, its versatility and performance make it a preferred choice among developers and engineers seeking to push the boundaries of innovation.
SKU: n/a -
Basic Electronic Components
eSun 1.75mm eASA 3D Printing Filament 1kg-Black
Print Settings
- Best print temperature: 220-260℃
- Feed rate: 20-90mm/s
- Idling speed: 90-150mm/s
- Set your print bed temperature to approximately 90°C – 110°C. (if possible cool the bed down by about 10-20°C after the first couple of layers)
- ASA printed at high temperatures will make the final product extra strong.
- Sticks to Kapton Tape, ABS Juice (scrap ABS filament dissolved in acetone), or extra strong hairspray on clean glass.
- A fully enclosed printer is recommended if possible, to help keep some heat in while printing with ASA.
- Works well with HIPS support material.
Features:
- Excellent mechanical physical property
- Weather-resistant, high temperature resistant and excellent UV resistant
- Anti-static material.
SKU: n/a -
Basic Electronic Components
eSun 1.75mm eSilk 3D Printing PLA Filament Gold
eSUN’s eSilk PLA Filament utilizes a polyester-like additive to offer a silky smooth, glossy and almost soft-to-the-touch finish in beautiful Gold. Due to its lower printing temperature is easier to print with and therefore better suited for parts with fine details. eSUN’s eSilk filament offers very cool aesthetics features and maintaining the great properties that make PLA so easy to print with.
Gold eSilk filament is excellent for printing almost anything that you want to be eye-catching – including robot parts, busts of famous people (or yourself) and ultra-shiny Cosplay gear like retro star-guns and power-armour.
Features:
- Non-harmful,Non-toxic
- Environment-friendly
- Good material toughness
- Good Strength
- Suitable for complex models
- Low material shrinkage rate
- Uniform diameter
- Consistently high quality
- Made from great, high-performance materials
SKU: n/a -
Basic Electronic Components
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Blue
This is a eSun ABS+ 1.75mm 3D Printing Filament 1kg-Blue.
eSun ABS+ is an upgrade to normal ABS. It is suitable for all 3D printers and can replace ABS completely. The material is made entirely from corn grain, suitable for printing of larger objects and stringing problems are from the past with ABS+.
We zbotic.in offering a variety of colors from the eSun ABS+ assortment. Experience a smoother 3D print experience with this great material. This new ABS+ is tougher than regular ABS and demonstrates much less warping
Features:
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: n/a -
Basic Electronic Components
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Cold White
eSun ABS+ is an upgrade to normal ABS. It is suitable for all 3D printers and can reABSce ABS completely. The material is made entirely from corn grain, suitable for printing of larger objects and stringing problems are from the past with ABS+.
We zbotic.in offering a variety of colors from the eSun ABS+ assortment. Experience a smoother 3D print experience with this great material. This new ABS+ is tougher than regular ABS and demonstrates much less warping
Features:
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: n/a -
Basic Electronic Components
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Green
eSun ABS+ is an upgrade to normal ABS. It is suitable for all 3D printers and can replace ABS completely. The material is made entirely from corn grain, suitable for printing of larger objects and stringing problems are from the past with ABS+.
We zbotic.in offering a variety of colors from the eSun ABS+ assortment. Experience a smoother 3D print experience with this eSun ABS+ 1.75mm 3D Printing Filament 1kg-Green material. This new ABS+ is tougher than regular ABS and demonstrates much less warping
Features:
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: n/a -
Basic Electronic Components
eSun ABS+ 1.75mm 3D Printing Filament 1kg-Grey
This is a eSun ABS+ 1.75mm 3D Printing Filament 1kg-Grey.
eSun ABS+ is an upgrade to normal ABS. It is suitable for all 3D printers and can replace ABS completely. The material is made entirely from corn grain, suitable for printing of larger objects and stringing problems are from the past with ABS+.
We zbotic.in offering a variety of colors from the eSun ABS+ assortment. Experience a smoother 3D print experience with this great material. This new ABS+ is tougher than regular ABS and demonstrates much less warping
Features:
- Tougher and stronger
- Less warping (about 0.4% compared to over 8% in regular ABS)
- Prints smoother & smoother printed objects
- Better scratch, heat and oil resistance
- Can be polished using acetone
- Can be easily colored.
SKU: n/a
