Electronic Components
Showing 769–792 of 1177 results
-
Basic Electronic Components, Electronic Components, Uncategorized
HW Battery 9V With Connector For Arduino/ Robotics
-17%
Basic Electronic Components, Electronic Components, UncategorizedHW Battery 9V With Connector For Arduino/ Robotics
Features:-
-
- Model Number: 9V 6F 22.
- Battery Type: Zinc Carbon.
- Size: 6F22 006P.
- Jacket: Metal.
- Single Battery Dimensions (mm): L- 26. 5, H – 48. 5, W – 17. 5 (Max).
- Nominal Voltage(V) :9V.
- Discharge Resistance(Ω): 620.
- Cut-off Voltage(V): 5.4.
specification:-
- DIY projects.
- Electrical/Electronic projects.
- Radios.
- Multimeter.
- And many more.
Package Content:
1 x 9v battery
1 x wire with the battery connector
SKU: n/a -
-
Basic Electronic Components
HX710B Weighing Scale 24-Bit Analog to Digital Convertor (ADC) IC SMD-8 Package
-57%
Basic Electronic ComponentsHX710B Weighing Scale 24-Bit Analog to Digital Convertor (ADC) IC SMD-8 Package
The HX710B Weighing Scale is a precision 24-bit ADC designed for weigh scales and industrial control systems. It features a built-in low-noise amplifier (PGA) with a fixed gain of 128, providing high-precision measurements. The device offers a simple digital control interface with no need for programming and supports 10SPS or 40SPS data rates. It also includes DVDD and AVDD voltage difference detection and simultaneous 50/60Hz supply rejection for stable operation in noisy environments. The operating voltage range is from 2.6V to 5.5V, and it comes in an 8-pin SOP-8 package.
Features :
24-bit resolution, PGA with gain of 128
Built-in voltage difference detection (DVDD, AVDD)
Low noise, 50/60Hz supply rejection
Selectable 10SPS/40SPS output data rate
Temperature range: -40°C to +85°CSKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
IMC1210ER100K SMD Wire Wound Inductor
-18%
Basic Electronic Components, Electronic Components, Wire Wound InductorsIMC1210ER100K SMD Wire Wound Inductor
IMC1210ER100K, Wirewound Inductor, 10 µH, 2.1 ohm, 33 MHz, 189 mA, 1210 [3225 Metric], IMC-1210
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
Package Includes:
1 x IMC1210ER100K SMD Wire Wound Inductor
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
INR18650 M26 2600MAH Lithium-Ion Battery
-53%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsINR18650 M26 2600MAH Lithium-Ion Battery
INR18650 M26 2600mAh Lithium-Ion Battery comes with a rated voltage of 3.7 volts and a capacity of 2600mAh. It is a single cell, compact, and powerful battery cell with 2600 mAh capacity. It is very convenient to install in your project to fulfill the 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible battery adapter/holder or they can be permanently soldered to your application’s power source wires.
Features:
- Battery Type: Lithium-Ion Battery
- Shape: Cylindrical Battery
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
- No memory effect
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Lightweight, small size
- High performance and capacity
- Flat top to suit many devices fitting.
Package Includes:
1 x INR18650 M26 2600mAh Lithium-Ion Battery
SKU: n/a -
Basic Electronic Components
IR Remote Control
IR Remote Control
This is a 38kHz universal infrared (IR) remote control featuring 21 keys and the NEC encoding format. It is compatible with a wide range of devices that have a USB port, such as stereos, car MP3 players, foot baths, lighting systems, digital photo frames, microcontroller development boards, and learning boards.
Equipped with a 38kHz infrared transmitter and a MOS integrated circuit, this remote follows the NEC transmission protocol. This format is widely supported by various IR receivers, including those used in TVs and VCD players. The NEC format consists of leader codes, 16-bit custom codes, and 16-bit data codes. The frequency of oscillation is determined by the crystal, and the IR LEDs emit 38kHz IR pulses, ensuring compatibility with most IR sensors.
SKU: n/a -
Basic Electronic Components
Jiyi K3 Apro Flight Controller Kit
JIYI K3-A Pro flight controller is specially designed for agricultural sprayer drones. It has a variety of modes and exclusive functions for agriculture sprayer drones. It supports manual, semi-autonomous and autonomous flight. It can monitor drug flow in real time and intelligently match the spray volume to achieve precise UAV pesticide spraying . Equipped with professional App ground control station, it is efficient and easy to operate
SKU: n/a -
Basic Electronic Components
JQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
-65%
Basic Electronic ComponentsJQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
JQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
The JQ6500 is a chip that can play MP3 and WMV files through serial ports. It has a built-in decoder for these formats and a software that supports the TF card driver. It also allows the computer to update the spi flash content directly and supports the FAT16 and FAT32 file systems. It can play specific music or control how the music is played with simple serial commands, without any complex operations. This product is easy to use, stable and reliable. Moreover, the chip is a customized product that is designed for low-cost solutions in the fixed voice player field.
Features
SKU: n/a -
Basic Electronic Components
JST-SH Servo Plug Set (JR) Gold Plated-(Pack of 10)
This is JST-SH Servo Plug Set (JR) Gold Plated. These gold plated JST-SH plug kits are a must-have for any RC enthusiast, there will be a time when you strip out a wire from your servo plug or you simply need to shorten servo a lead to make your model neater and keep your wires away from moving parts.
There are 10 sets each of both male and female connectors to give you both options.
Although you can put these together using a pair of needle nose pliers the best way is to use our JST Crimping Tool as a properly crimped joint offers the least resistance.
SKU: n/a -
-
Basic Electronic Components
Koptan 10mm x 33m High Temperature Resistant Tape for 3D Printers
Koptan tape is a polyimide film first developed by DuPont in the 1960s. It remains stable at an extremely wide range of temperatures from -269˚C to 260˚C and has been an industry-standard due to its excellent electrical, thermal, chemical and mechanical properties. This enables the film to withstand extreme temperatures, vibration, and other demanding environments.
This Koptan 50mm x 33m High-Temperature Resistant Tape for 3D Printers is a polyester film tape with a high-temperature resistant adhesive. Primarily used to hold transfer sheets in place while sublimating onto a variety of items and hold the polymer plate on the heating platen in the hot foil stamping. Excellent heat & solvent resistance.Minimal shrinkage after baking and clean removal.
Due to Koptan tape’s large range of temperature stability and electrical isolation ability, it is used during the manufacturing and final assembly of electronic components. It acts as a protective layer that isolates and prevents the electrostatic discharge of sensitive components, also protecting and restraining components during high temp applications and reflow soldering procedures.
ABS and Koptan adhere extremely well to one another, making Koptan tape a perfect 3D printing bed surface layer. It is usually applied to a glass or aluminum bed surface, where extruded ABS filament adheres to the surface.
Specification and Features:
- Material: Polyimide
- Spindle Type: Roll
- Tape Length: 33m
- TapeWidth: 50mm
- Colour: Metallic Brown
- Temperature Range: 200ºC
- High-quality product from a well-known brand
SKU: n/a -
Basic Electronic Components
Koptan 50mm x 33m High Temperature Resistant Tape for 3D Printers
Koptan tape is a polyimide film first developed by DuPont in the 1960s. It remains stable at an extremely wide range of temperatures from -269˚C to 260˚C and has been an industry-standard due to its excellent electrical, thermal, chemical and mechanical properties. This enables the film to withstand extreme temperatures, vibration, and other demanding environments.
This Koptan 50mm x 33m High-Temperature Resistant Tape for 3D Printers is a polyester film tape with a high-temperature resistant adhesive. Primarily used to hold transfer sheets in place while sublimating onto a variety of items and hold the polymer plate on the heating platen in the hot foil stamping. Excellent heat & solvent resistance.Minimal shrinkage after baking and clean removal.
Due to Koptan tape’s large range of temperature stability and electrical isolation ability, it is used during the manufacturing and final assembly of electronic components. It acts as a protective layer that isolates and prevents the electrostatic discharge of sensitive components, also protecting and restraining components during high temp applications and reflow soldering procedures.
ABS and Koptan adhere extremely well to one another, making Koptan tape a perfect 3D printing bed surface layer. It is usually applied to a glass or aluminum bed surface, where extruded ABS filament adheres to the surface.
Specification and Features:
- Material: Polyimide
- Spindle Type: Roll
- Tape Length: 33m
- TapeWidth: 50mm
- Colour: Metallic Brown
- Temperature Range: 200ºC
- High-quality product from a well-known brand
SKU: n/a -
Basic Electronic Components, DIY Learning and Robot Kits, Sensors
L298N 2A Based Motor Driver Controller Module+100RPM Dual Shaft BO Motor (4pcs)+4 x 65mm Robot Wheel-Combo
-50%
Basic Electronic Components, DIY Learning and Robot Kits, SensorsL298N 2A Based Motor Driver Controller Module+100RPM Dual Shaft BO Motor (4pcs)+4 x 65mm Robot Wheel-Combo
- L298N Motor Driver Controller Module is a high power motor driver for driving DC and Stepper motors. It can control upto 4 DC motors, or 2 DC motors with directional and speed control. This motor driver is for robotics and mechatronics projects. The 150 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a geared DC Motor. It is an alternative to metal gear DC motors. The 65MM Wheel is made up of standard grade rubber.
- L298N: Current Sense for each motor | Heatsink for better performance | Power-On LED indicator | Directional control | Speed control | High power motor || BO motor: Low density and inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Relatively low coefficient of friction || Wheel: Car hub is reinforced nylon | Sturdy | Tire with sponge liner for more strength | With upgraded tire tread for greater friction
- Dimensions: L298N(LxWxH):44x44x28mm | Shaft length:7mm | Shaft Diameter:5.5mm | Motor(LxWxH):55x48x23mm | Diameter of wheel:65mm | Center Shaft Hole Diameter (mm):5.4 (Round edge) and 3.5 (Flat edge)
- The L298N motor driver is perfect for robotics and mechatronics projects. It can also be used for controlling motors from microcontrollers, switches, relays, etc. It is capable of driving DC and Stepper motors for micro mouse, line following robots, robot arms, etc. The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car. The 65mm wheel is only compatible with BO motor.
- L298N: Input Voltage:3.2V-40V DC | L298N Dual H-Bridge DC Motor Driver | Operating voltage:DC 5V-35V | Peak Current:2Amps | Speed Control:PWM | Control Signal input voltage range:0.3V≤Vin≤1.5V (Low), 2.3≤Vin≤Vss (High) | Max. power consumption:20W (when the temperature T=75℃) || BO Motor: Operating Voltage:3 to 12V | Current (without loading):40-180mA | RPM:100 | Output Torque:0.8 kgcm | Motor Design: L-shaped || Wheel: Loading Capacity (kg):2.5 | D hole For BO Motor (mm):6
SKU: n/a -
Basic Electronic Components
L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
The motor driver for DC and Stepper Motors is highly sought after due to its incorporation of the renowned L298N Dual H Bridge Driver Chip. It is designed for optimal performance at an affordable price.
The L298N Dual H Bridge DC/Stepper Motor Driver Controller Module is capable of operating two robot motors. It employs the well-known L298N Dual H-Bridge Motor Driver chip, enabling it to power motors ranging from 5-35 Volts with a current capacity of up to 2 Amps per channel. Its versatile digital input controls grant full autonomy to each motor, providing precise management of speed, direction, and braking.
Additionally, the board includes a convenient 5V regulator, which can supply power to additional components, such as the microcontroller of your robot. The module’s design is modular, making it compatible with a broad range of robot controllers, including the widely-used Arduino series.
The L298N driver module features the authentic, high-quality L298N chip from ST company, utilizing SMT technology and premium aluminum electrolytic capacitors to ensure circuit stability. This module proficiently manages the speed and direction of DC motors and also controls two-phase stepper motors.
Features :
- Popular L298N Dual H-Bridge Motor Driver chip
- Drivers motors from 5-35V at up to 2A per channel
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
- Screw terminals for easy connections to motors and power
- Includes a heavy-duty heat sink for maximum performance
- Easy to interface with most robot controllers
- Supports current sensing
- Handy power LED
SKU: n/a -
Basic Electronic Components
Large Size Piezoelectric Buzzer Beeper Alarm – Good Quality
- Product: Piezo Buzzer Alarm
- Type: Piezoelectric Buzzer
- Length: 15mm
- Diameter: 30 mm
- Voltage: 5-20v
- Current: <25MA
- Colour: Black
Application
Security and safety products
Portable devices
Medical equipment
Remote monitoring systems
Timers
Household appliances
Measurement and flow instruments
Weighing machines
User input recognition
SKU: n/a -
Basic Electronic Components
LCD1602 Parallel LCD Display with IIC/I2C Interface
LCD1602 Parallel LCD Display with IIC/I2C Interface
For those looking to enhance visual output in Arduino projects, the LCD1602 Parallel LCD Display with I2C interface is an excellent choice. This cost-effective display features a 16×2 configuration with white text on an RGB Liquid Crystal Display, making it suitable for a variety of applications.
The LCD1602 presents clear, high-contrast white text against a blue background, complemented by backlighting that ensures visibility and readability—ideal for Arduino-based projects.
A key benefit of this display is its integrated I2C adapter, which allows you to connect using only the I2C pins, reducing the number of required connections on the Arduino. This simplified setup is made possible by the I2C (Inter-Integrated Circuit) protocol, which uses two bidirectional lines: SDA (Serial Data Line) and SCL (Serial Clock Line).
Operating at standard voltage levels of 5V or 3.3V, the I2C interface is versatile and compatible with various microcontrollers. Its easy connectivity and efficient library support make integration straightforward, requiring minimal coding efforts.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
Leadfree so/msop/tssop/soic/sop8 to dip8 Wide-Body Narrow-Body Adapter Board PCB 8p – Pack of 5
-30%
Basic Electronic Components, Electronic Components, PCB AdapterLeadfree so/msop/tssop/soic/sop8 to dip8 Wide-Body Narrow-Body Adapter Board PCB 8p – Pack of 5
SO/MSOP/TSSOP/SOIC/SOP8 packages are mostly used in Opamps, 555 times Memory ICs which work in low space and high functioning environment. But if you are using any microcontroller IC for prototyping, they are mostly available in DIP packages and while prototyping you need to connect various components with Jumper wires and breadboard. For making the prototyping easier and saving you the trouble of soldering and desoldering this SO/MSOP/TSSOP/SOIC/SOP8 to DIP package PCB Transfer Board is something you can use while prototyping for rapid circuit design and testing. You can also connect the legs of the DIP package Microcontrollers in it and It will work just fine or you can use the jumper wires for it too.
This PCB has two sides one for 1.27mm spacing SO8, SOP8, SOIC8 packages and the other for 0.65mm SSOP8, TSSOP8, MSOP8 package. You just need to solder the IC and the board itself and take out the DIP connections by either using a breadboard or using Jumper wires.
- Pin spacing of 1.27mm, suitable for the common SO8, SOP8, SOIC8 package transfer into DIP8 upright
- Pin spacing of 0.65mm, suitable for common SSOP8, TSSOP8, MSOP8 encapsulation transfer into DIP8 upright
- Low cost and easy to use
Specifications:
- Dimensions: 12 x 12 mm.
- Pitch: 0.4 mm.
Features:
- This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips.
- The side for pin pitch size is 1.27mm, It can be used for most of the SO, SOP, SOIC to 2.54mm DIP.
- B side for pin pitch size 0.65mm, It can be used for most of the SSOP, TSSOP, MSOP to 2.54mm DIP.
Note: Header pins are not included in the Package.
Package Includes :
1 x SO/MSOP/TSSOP/SOIC/SOP8 to DIP8 PCB Board
SKU: n/a -
Electronic Components
Leadfree so/msop/tssop/soic/sop8 to dip8 Wide-Body Narrow-Body Adapter Board PCB 8p – Pack of 5
-50%
Electronic ComponentsLeadfree so/msop/tssop/soic/sop8 to dip8 Wide-Body Narrow-Body Adapter Board PCB 8p – Pack of 5
- This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips.
- The side for pin pitch size 1.27mm, It can be used for most of the SO, SOP, SOIC to 2.54mm DIP.
- B side for pin pitch size 0.65mm, It can be used for most of the SSOP, TSSOP, MSOP to 2.54mm DIP.
SKU: n/a -
Basic Electronic Components
Left Side MK8 extruder Aluminum 3D Printer Block
Left Side MK8 extruder Aluminum 3D Printer Block
This is an MK8 Extruder Replacement Aluminum Alloy Block. It can help you replace your extruder if it is blocked or damaged. The product comes as a kit that you need to assemble yourself. You can find many instructions and videos online that will guide you through the assembly process.
The MK8 Extruder has three different types: Right Side, Left Side and Right Short. These types refer to the direction of the filament extrusion relative to the block. You can use any type for a single extruder. For a dual extruder, you need to use one Right Side and one Left Side type, as shown in the product image.
Specifications and Features:
- Left Side MK8 Extruder
- High-Quality Replacement for your blocked/damaged MK8 Extruder
- Available in 3 different types to support dual extruder setup
- Material: Aluminum alloy
- Weight: 60 gm
SKU: n/a
