Sensors
Showing 433–456 of 995 results
-
Basic Electronic Components, DIY Learning and Robot Kits, Sensors
L298N 2A Based Motor Driver Controller Module+100RPM Dual Shaft BO Motor (4pcs)+4 x 65mm Robot Wheel-Combo
-50%
Basic Electronic Components, DIY Learning and Robot Kits, SensorsL298N 2A Based Motor Driver Controller Module+100RPM Dual Shaft BO Motor (4pcs)+4 x 65mm Robot Wheel-Combo
- L298N Motor Driver Controller Module is a high power motor driver for driving DC and Stepper motors. It can control upto 4 DC motors, or 2 DC motors with directional and speed control. This motor driver is for robotics and mechatronics projects. The 150 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a geared DC Motor. It is an alternative to metal gear DC motors. The 65MM Wheel is made up of standard grade rubber.
- L298N: Current Sense for each motor | Heatsink for better performance | Power-On LED indicator | Directional control | Speed control | High power motor || BO motor: Low density and inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Relatively low coefficient of friction || Wheel: Car hub is reinforced nylon | Sturdy | Tire with sponge liner for more strength | With upgraded tire tread for greater friction
- Dimensions: L298N(LxWxH):44x44x28mm | Shaft length:7mm | Shaft Diameter:5.5mm | Motor(LxWxH):55x48x23mm | Diameter of wheel:65mm | Center Shaft Hole Diameter (mm):5.4 (Round edge) and 3.5 (Flat edge)
- The L298N motor driver is perfect for robotics and mechatronics projects. It can also be used for controlling motors from microcontrollers, switches, relays, etc. It is capable of driving DC and Stepper motors for micro mouse, line following robots, robot arms, etc. The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car. The 65mm wheel is only compatible with BO motor.
- L298N: Input Voltage:3.2V-40V DC | L298N Dual H-Bridge DC Motor Driver | Operating voltage:DC 5V-35V | Peak Current:2Amps | Speed Control:PWM | Control Signal input voltage range:0.3V≤Vin≤1.5V (Low), 2.3≤Vin≤Vss (High) | Max. power consumption:20W (when the temperature T=75℃) || BO Motor: Operating Voltage:3 to 12V | Current (without loading):40-180mA | RPM:100 | Output Torque:0.8 kgcm | Motor Design: L-shaped || Wheel: Loading Capacity (kg):2.5 | D hole For BO Motor (mm):6
SKU: n/a -
-
-
Sensors
LEM Current Transducer, LA Series, 25A, 0.5 %, Closed Loop Output
- Closed-loop current transducer using the Hall effect technology
- Primary nominal current of 25A
- 0.5% accuracy
- The primary current measuring range is ±36A
- The supply voltage is ±15V
- The conversion ratio is 1-2-3-4-5: 1000
- Secondary nominal RMS current is 25mA
SKU: n/a -
Sensors
Linear Magnetic Hall sensor
- Operating Voltage: 3.3V-5V
- Features wide range voltage comparator LM393
- Adjustable sensitivity
- Signal output indicator with the retaining bolt hole, convenient installation
- Output form digital switch output (0 and 1 high and low level)
- The output effective signal is low level
- When there is sound, outputs low level and the signal light
SKU: n/a -
-
-
Sensors
LITTELFUSE Hall Effect Proximity Sensor, Flange Mount, 55100 Series, 3 Wire, 130 G, 3.8 to 24 Vdc
-30%
SensorsLITTELFUSE Hall Effect Proximity Sensor, Flange Mount, 55100 Series, 3 Wire, 130 G, 3.8 to 24 Vdc
- Product: Hall Effect Proximity Sensor, Flange Mount, 55100 Series
- Supply Voltage: 2.7 to 24 Vdc
- Output High Voltage: Sinking Output
- Output Low Voltage: 0.4 @ 20mA
- Output Current: 25 mA
- Reverse/over-voltage protection
- Built-in temperature compensation
SKU: n/a -
Sensors
LITTELFUSE Hall Effect Proximity Sensor, Flange Mount, 55100 Series,19 mm, 59 G
- Product: Hall Effect Proximity Sensor
- Size: 19 mm
- Operating Voltage: +3 to +24
- Operating Temperature: 40 to + 100°C
- Switching Speed: 12 kHZ
- Magnetically operated position sensor
- Digital or programmable analog types available
- Medium, high or programmable sensitivities
SKU: n/a -
Sensors
LITTELFUSE Reed Switch, 59145 Series, Flange, 20.32 mm, SPST-NO, 10 W, 150 Vdc. 120 Vac, 0.3 A DC, 0.25 A AC
-17%
SensorsLITTELFUSE Reed Switch, 59145 Series, Flange, 20.32 mm, SPST-NO, 10 W, 150 Vdc. 120 Vac, 0.3 A DC, 0.25 A AC
- Product: Reed Switch
- Output type: SPST-NO
- Operating temperature: -40°C ~ 105°C
- Current: 0.5 A
- 2 Part Magnetically Operated Proximity Sensor
- Flying leads can exit either left or right hand side of the housing
SKU: n/a -
Sensors
LM35D Analog Temperature Sensor Module + Cable
- Based on the semiconductor LM35 temperature sensor
- Can be used to detect ambient air temperature
- Calibrated directly in °Celsius (Centigrade)
- Linear + 10 mV/°C Scale Factor
- 0.5°C Ensure accuracy (at +25°C)
- Low power consumption, less than 60uA
- Low output impedance, 1mA current through only 0.1Ω
- With screw holes for easy installation and fixed. Aperture 2.6mm
SKU: n/a -
-
-
