Sensors
Showing 49–72 of 995 results
-
-
-
-
-
Sensors
801S Vibration Shock Sensor Module
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SKU: n/a -
-
Sensors
ACS712 20A Current Sensor IC (ACS712ELCTR-20A-T)
- 80 kHz bandwidth.
- Total output error 1.5% at TA = 25°C.
- Small footprint, low-profile SOIC8 package.
- 1.2 mΩ internal conductor resistance.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
- 5.0 V, single-supply operation.
- 66 to 185 mV/A output sensitivity.
SKU: n/a -
Sensors
ACS758LCB-050B Hall-Effect-Based Linear Current Sensor IC
- Integrated shield greatly reduces capacitive coupling from the current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high-voltage applications.
- Total output error improvement through gain and offset trim over temperature.
- Small package size, with easy mounting capability.
- Monolithic Hall IC for high reliability.
- Output voltage proportional to AC or DC currents.
- Factory-trimmed for accuracy.
- Extremely stable output offset voltage.
- Nearly zero magnetic hystereses.
SKU: n/a -
Sensors
ACS758LCB-050B Hall-Effect-Based Linear Current Sensor IC
- Integrated shield greatly reduces capacitive coupling from the current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high-voltage applications.
- Total output error improvement through gain and offset trim over temperature.
- Small package size, with easy mounting capability.
- Monolithic Hall IC for high reliability.
- Output voltage proportional to AC or DC currents.
- Factory-trimmed for accuracy.
- Extremely stable output offset voltage.
- Nearly zero magnetic hystereses.
SKU: n/a -
Sensors
Adafruit Accessories Muscle Sensor Surface EMG Electrodes – H124SG Covidien – Pack of 6
- Good electrical characteristics
- Different base materials, sizes, and connections
- Monitoring electrode with foam tape and radiolucent stud.
- ECG Electrode with convenient abrader.
- ECG Electrode for monitoring applications requiring high adhesion.
- Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
- Remains fresh for 30 days out of the bag.
SKU: n/a -
Sensors
Adafruit MPRLS Ported Pressure Sensor Breakout – 0 to 25 PSI RoHS Compliant
- A silicone-gel covered pressure sensing gauge with a pre-calibrated and compensated 24 bit ADC
- Measure absolute pressure 0 to 25 PSI
- The port is made of stainless steel and is 3.7mm long and 2.5mm diameter
- 3.3V power regulation and level shifting
- Weight: 2g
SKU: n/a
