Current and Voltage Sensor
Showing 1–24 of 41 results
-
Sensors
20A Range Current Sensor Module ACS712
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
SKU: n/a -
Sensors
30A range Current Sensor Module ACS712
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
SKU: n/a -
-
Sensors
ACS712 20A Current Sensor IC (ACS712ELCTR-20A-T)
- 80 kHz bandwidth.
- Total output error 1.5% at TA = 25°C.
- Small footprint, low-profile SOIC8 package.
- 1.2 mΩ internal conductor resistance.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
- 5.0 V, single-supply operation.
- 66 to 185 mV/A output sensitivity.
SKU: n/a -
Sensors
ACS758LCB-050B Hall-Effect-Based Linear Current Sensor IC
- Integrated shield greatly reduces capacitive coupling from the current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high-voltage applications.
- Total output error improvement through gain and offset trim over temperature.
- Small package size, with easy mounting capability.
- Monolithic Hall IC for high reliability.
- Output voltage proportional to AC or DC currents.
- Factory-trimmed for accuracy.
- Extremely stable output offset voltage.
- Nearly zero magnetic hystereses.
SKU: n/a -
Sensors
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
-19%
SensorsCJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
SKU: n/a -
-
Sensors
LEM Current Transducer, LA Series, 25A, 0.5 %, Closed Loop Output
- Closed-loop current transducer using the Hall effect technology
- Primary nominal current of 25A
- 0.5% accuracy
- The primary current measuring range is ±36A
- The supply voltage is ±15V
- The conversion ratio is 1-2-3-4-5: 1000
- Secondary nominal RMS current is 25mA
SKU: n/a -
-
-
-
Sensors
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A
- Input Current : 0-30A
- Output Mode: 0-1V @ 30mA
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
SKU: n/a -
-
-
