- Step Angle: 1.8°
- Holding Torque: 1.2 kg-cm
- Supply Current (A): 0.67
- Winding Type: Bipolar
- No. of Leads: 4
- Inductance: 7.3 mH/Phase
- Resistance: 9.2 Ω/phase
- Rotor Inertia: 18 gm-cm2
- Weight (gm): 272
- Shaft Diameter (mm): 6-(round side), 5-(flat side)
-20%
Motors | Drivers | Pumps | Actuators
28HS51-0674JX5.18 NEMA11 1.2 Kg-cm Stepper Motor with Planetary Gearbox – D-Type Shaft
- Step Angle: 1.8°
- Holding Torque: 1.2 kg-cm
- Supply Current (A): 0.67
- Winding Type: Bipolar
- No. of Leads: 4
- Inductance: 7.3 mH/Phase
- Resistance: 9.2 Ω/phase
- Rotor Inertia: 18 gm-cm2
- Weight (gm): 272
- Shaft Diameter (mm): 6-(round side), 5-(flat side)
₹8,034.00 ₹10,034.00
Based on 0 reviews
Be the first to review “28HS51-0674JX5.18 NEMA11 1.2 Kg-cm Stepper Motor with Planetary Gearbox – D-Type Shaft”
Related products
-
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 100RPM Dual Shaft BO Motor – Yellow – Pack Of 8
-38%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 100RPM Dual Shaft BO Motor – Yellow – Pack Of 8
- The 100 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a geared DC Motor. It is an alternative to metal gear DC motors.
- Low density | Lightweight | Low inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Inherent lubricity | Relatively low coefficient of friction
- Shaft length : 7 mm Motor Design : L-Shaped Shaft Diameter : 5.5 mm Size : 55 x 48 x 23 mm
- The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car.
- Operating Voltage : 3 to 12V Current (without loading) : 40-180mA RPM : 100 Output Torque : 0.8 kg cm
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
-40%
Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
-30%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
- DC Motor – Voltage: 6V to 12V; RPM : 200; Torque Range: 5 Kg-cm
- Input supply voltage: 10V – 40VDC ; Max. Current: 10A
- 1. Connect your DC motor (or DC load) to the motor terminals as indicated. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer.
- Control power: 0.01~400W; Static current: 0.02 A (standby) PWM duty ratio:10%~100%; PWM frequency: 13 KHz
- Package include: 1 x 200 RPM DC Motor, 1 x 10A PWM
SKU: n/a
There are no reviews yet.