The 4S 30A BMS for Battery of LifePO4 chemistry is a high quality, reliable BMS. It comes in use with LifePO4 batteries. Its a high current protection circuit board but it has no balancing circuit. It has continuous discharge current of 30A (Max). The BMS provides overcharge protection, over discharge protection, and over current detection.
This 4S 30A BMS module is usable with LifePO4 Battery with 4S (4 Series) Design
₹1,611.00 ₹4,833.00
The 4S 30A BMS for Battery of LifePO4 chemistry is a high quality, reliable BMS. It comes in use with LifePO4 batteries. Its a high current protection circuit board but it has no balancing circuit. It has continuous discharge current of 30A (Max). The BMS provides overcharge protection, over discharge protection, and over current detection.
This 4S 30A BMS module is usable with LifePO4 Battery with 4S (4 Series) Design
The piezo buzzer works on the principle of the piezoelectric effect and produces sound based on the reverse of the piezoelectric effect. the electric potentials difference across piezo material is a reason to generate pressure variations. Piezo buzzer is most famous among other types of buzzers because of the higher sound generation using less current. Other names of buzzers are an audio alarm beepers audio indicator audio transducer audible alarm.
Specification
Operating voltage: 4v to 8v
Rated voltage: 6v
Rated current: 25mA
Operating current: 30mA
Oscillator frequency: 3.2kHz
Sound level: 85dB
Sound tone: continuous
Product Details :
breadboard friendly
Works as beeper and alarm
| Buzzer type | Piezoelectric |
| Diameter | 25mm |
| Height | 35mm |
| Weight | 20gm |
| Polarity | marked on surface |
| Number of pins | 2 |
| Pin type | through holes |
| Package contains | big piezo buzzer |
| color | black |
This is a Universal PCB Prototype Board Double-Side 12 x 18 CM High-quality universal prototyping board with standard 0.1″ spacing through holes.
High-quality 12 x 18 CM FR4 material, Double-sided, HASL, NC CNC drilled.
Package Includes :
1 x Universal PCB Prototype Board Double-Side 12 x 18 CM
1 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications.
We made it available in the form of a bunch of different values as required for the project to provide convenience, so you need not find a differently required value resistor at different places while working on your project.
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Notice that you do not need to use limiting resistors since they are already included on the board.
Features:
Package included:
1xRGB 3 Color LED Module
There are no reviews yet.