- Step Angle:1.8°
- No. of Leads: 4
- Keyway Type
- Shaft Length (mm): 37
- Shaft Diameter (mm): 14
- Holding Torque (kg-cm): 122
- Temperature Rise: 80ºCmax
-24%
Motors | Drivers | Pumps | Actuators
86HS155-6204 NEMA34 122Kg-cm Stepper Motor- Keyway Type
- Step Angle:1.8°
- No. of Leads: 4
- Keyway Type
- Shaft Length (mm): 37
- Shaft Diameter (mm): 14
- Holding Torque (kg-cm): 122
- Temperature Rise: 80ºCmax
₹9,399.00 ₹12,399.00
Based on 0 reviews
Be the first to review “86HS155-6204 NEMA34 122Kg-cm Stepper Motor- Keyway Type”
Related products
-
Motors | Drivers | Pumps | Actuators
TOWER PRO 9G MICRO SERVO MOTOR
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck useFeatures:- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -10 to +60 Degree C
- Operating Speed (4.8V): 0.12sec/60 degrees at no load
- Operating Speed (6.0V): 0.10sec/60 degrees at no load
- Stall Torque (4.8V): 1.8kg/cm
- Stall Torque (6.0V): 2.4kg/cm
- 360 Modifiable: Yes
- Bearing Type:Â Ball Bearing
- Gear Type: Nylon Gears
- Connector Wire Length: 12″
- Dimensions:Â 22×11.5x27mm
- Weight: 11g
Package Content:
1 x TOWER PRO SG90 9G MICRO SERVO MOTOR
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 100RPM Dual Shaft BO Motor – Yellow – Pack Of 8
-38%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 100RPM Dual Shaft BO Motor – Yellow – Pack Of 8
- The 100 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a geared DC Motor. It is an alternative to metal gear DC motors.
- Low density | Lightweight | Low inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Inherent lubricity | Relatively low coefficient of friction
- Shaft length : 7 mm Motor Design : L-Shaped Shaft Diameter : 5.5 mm Size : 55 x 48 x 23 mm
- The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car.
- Operating Voltage : 3 to 12V Current (without loading) : 40-180mA RPM : 100 Output Torque : 0.8 kg cm
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
-30%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
- DC Motor – Voltage: 6V to 12V; RPM : 200; Torque Range: 5 Kg-cm
- Input supply voltage: 10V – 40VDC ; Max. Current: 10A
- 1. Connect your DC motor (or DC load) to the motor terminals as indicated. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer.
- Control power: 0.01~400W; Static current: 0.02 A (standby) PWM duty ratio:10%~100%; PWM frequency: 13 KHz
- Package include: 1 x 200 RPM DC Motor, 1 x 10A PWM
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
-40%
Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
SKU: n/a
There are no reviews yet.