- nRF52840 Cortex M4
- 2 MB of SPI Flash storage
- VDC-3-6
- MicroUSB port bootloader and serial port debugging
IoT and Wireless, Wearable Electronic
Adafruit Circuit Playground Bluefruit – Bluetooth Low Energy
- nRF52840 Cortex M4
- 2 MB of SPI Flash storage
- VDC-3-6
- MicroUSB port bootloader and serial port debugging
₹2,566.00 ₹3,099.00
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “Adafruit Circuit Playground Bluefruit – Bluetooth Low Energy” Cancel reply
Related products
-
Cameras, IoT and Wireless
AEROKART INDIA 3 Pack ESP32-CAM WiFi + Bluetooth Module Development Board with OV2640 Camera Module
-50%Cameras, IoT and WirelessAEROKART INDIA 3 Pack ESP32-CAM WiFi + Bluetooth Module Development Board with OV2640 Camera Module
0 out of 5(0)- ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
- ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
SKU: n/a -
IoT and Wireless
AEROKART INDIA 2 pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module(Pack of 2PCS)
-21%IoT and WirelessAEROKART INDIA 2 pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module(Pack of 2PCS)
0 out of 5(0)- This board features the ESP8266 ESP-12E but has all of its pins broken out. This enables the ESP8266 to be breadboard compatible. It also has an integrated micro-usb port which makes powering and programming the chip far easier compared to having to use a usb-to-serial adapter.
- The NodeMcu firmware can be loaded easily if you want to develop programs in Lua. It is also compatible when other leading micro-controller development platforms.
- You may need the CP2102 driver available from the Silabs website. It is free and easy to install.
- This board has a female Micro-USB port on the board for power and program uploading. This port type is very common on many consumer electronics and on smartphones.
- Flashing this device is easy. To flash, just hold the flash button and perform the flash using firmware programming software.
SKU: n/a -
Arducam Cameras and Accessories, IoT and Wireless
Arducam 5MP OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi
-10%Arducam Cameras and Accessories, IoT and WirelessArducam 5MP OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi
0 out of 5(0)- Comes With LS-40180 Fisheye Lens and M12 Lens Mount
- Focal Length: 4mm
- Field of View: 56°
- Compatible With Raspberry Pi
- Sensor Size: 1/4″ (OV5647)
SKU: n/a -
Cameras, IoT and Wireless
AEROKART INDIA 2 Pack ESP32-CAM WiFi Bluetooth Camera Module evelopment Board ESP32 with Camera Module OV2640
-30%Cameras, IoT and WirelessAEROKART INDIA 2 Pack ESP32-CAM WiFi Bluetooth Camera Module evelopment Board ESP32 with Camera Module OV2640
0 out of 5(0)- The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core
- The ESP32CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
- ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
- Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
- ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
SKU: n/a
There are no reviews yet.