F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC

Related products

• Flight Controller & Accessories

  OpenPilot CC3D EVO Flight Controller STM32 for RC Drone FPV Racing

  -30%

  Flight Controller & Accessories

  OpenPilot CC3D EVO Flight Controller STM32 for RC Drone FPV Racing

  0 out of 5

  (0)

  CC3D Flight Controller Hardware Features
  Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
  3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
  Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
  Software support for Windows, Mac, and Linux.
  Direct high-speed USB support with no drivers required, a truly plug-and-play device.
  Spektrum satellite receiver support.
  Futaba S-BUS hardware support.
  Innovative Flexi-port technology for superior port flexibility.
  4Mbits on-board EEPROM for configuration storage.

  Note: Please don’t flash/Update the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.

  Software for configuration: Openpilot

  You can also use Software for configuration: Librepilot

   

  Flexiport
  CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C
  and a single serial port or dual serial ports, according to your connectivity needs.

  Superior user experience
  OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally, for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with a bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.

  The OpenPilot project, whist still young, it trying to make Open Source much more user-friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!

  Sensors and Components
  3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,
  Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
  Simultaneous support for multiple receivers.
  ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
  MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
  FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
  10 PWM outputs to servos or ESC’s, or for camera stabilization
  Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
  Onboard USB connectivity for easy configuration.
  USB and serial telemetry and configuration
  Supported by powerful OpenPilot GCS
  4 Mbit onboard memory
  3C Quaternion based complementary filter running at 500Hz

  Package included:
  1 x CC3D EVO Flight Controller And Cables

  SKU: n/a

  ₹3,500.00 ₹4,999.00

  Add to cart

  Add to wishlist

  Compare
• Drone Kit, Drone Parts

  RC Aeroplane Kit ( Motor + ESC + Propeller + Servo + TX-RX (FSI6))

  -64%

  Drone Kit, Drone Parts

  RC Aeroplane Kit ( Motor + ESC + Propeller + Servo + TX-RX (FSI6))

  0 out of 5

  (0)

  This RC Aeroplane Kit includes almost all parts for the basic RC Aeroplane with 6ch RX TX. It includes everything to make and fly your own RC Aeroplane. This Kit Provides a FlySky FS-i6 RC Transmitter with Receiver,1000kv Brushless motor,30A Simonk ESC, TowerPro SG90 Servo Motor, and a 1045 Propeller pair(CW+CCW).

  FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter with FS-iA6 Receiver is a great low-cost entry-level 6-channel 2.4 GHz Transmitter and Receiver that uses solid and reliable Automatic Frequency Hopping Digital System spread spectrum technology. It also comes with an FS-iA6 6-channel receiver. Suitable for controlling Quadcopters, Multirotor, Heli, and Airplane.

  1000KV Brushless DC Motor is a brushless motor specifically made for RC planes, quadcopters, and multi-rotors. It is a 1000kV motor. It provides high performance, superpower, and brilliant efficiency.

  30A Simonk ESC Electronic Speed Controller can drive motors that consume up to 30A current. It can be used to control our brushless motors with a 2S-3S LiPo. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules.

  TowerPro SG90 Servo Motor is lightweight, high-quality, and lightning-fast. The servo is designed to work with almost all radio control systems. It is with excellent performance and high torque of 1.5 kg-cm gives you the freedom to use it for a variety of projects.

  The 10×4.5 inch Propeller Pair (CW+CCW) is a set of counter-rotating RC aircraft propellers perfect for use in twin and multiple motor RC airplanes or coaxial RC helicopters.  The length is 10 inches and the pitch is 4.5 inches per revolution.

  SKU: n/a

  ₹5,199.00 ₹14,500.00

  Add to cart

  Add to wishlist

  Compare
• Flight Controller & Accessories

  ARDUCOPTER APM 2.8 Flight Control Board for RC Multi Rotor Drone

  -49%

  Flight Controller & Accessories

  ARDUCOPTER APM 2.8 Flight Control Board for RC Multi Rotor Drone

  0 out of 5

  (0)

  This is the new APM 2.8  module. The sensors are exactly the same as with APM2.6, this version is ideal for use with multi-copters and rovers. The APM 2.8 is a complete open source autopilot system and the bestselling technology on the prestigious 2012 Outback Challenge UAV competition.

  It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors. This revision of the board is designed for vehicles (especially multi-copters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. On fixed-wing aircraft, it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference.

  APM 2.8 has an onboard compass so this is designed to be used with the 3DR uBlox GPS with Compass so that the GPS/Compass unit can be mounted further from noise sources than APM itself.

  Features:

   

  • Arduino Compatible

   

  • Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
  • Built-in compass

   

  • Includes 3-axis gyro, accelerometer, and magnetometer, along with a high-performance barometer
  • Straight Needle

   

  • One of the first open-source autopilot systems to use Invensense’s 6 DOF Accelerometer/Gyro MPU-6000.
  • Onboard 4 MegaByte Data flash chip for automatic data logging

   

  • Optional off-board GPS, uBlox LEA-6H module with Compass.

   

  • Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.

   

  Package Include:

   

  • 1 x APM 2.8 Flight Control Board

   

  • 1 x Set of Female to Female jumper Cables

   

  Note: Ardupilot and Arducopter Both identical.

  SKU: n/a

  ₹4,100.00 ₹8,000.00

  Add to cart

  Add to wishlist

  Compare
• DRONE COMBO

  Combo of 1000KV Brushless Motor + 30A SimonK ESC + 1045 Propeller Pair

  -20%

  DRONE COMBO

  Combo of 1000KV Brushless Motor + 30A SimonK ESC + 1045 Propeller Pair

  0 out of 5

  (0)

  This Kit Provides a 1000kv Brushless motor and 30A Simonk ESC  with a 1045 Propeller pair(CW+CCW).

  1000KV Brushless DC Motor is a brushless motor specifically made for RC planes, quadcopters, and multi-rotors. It is a 1000kV motor. It provides high performance, superpower, and brilliant efficiency. 

  30A Simonk ESC Electronic Speed Controller can drive motors that consume up to 30A current. It can be used to control our brushless motors with a 2S-3S LiPo. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules.

  The 10×4.5 inch Propeller Pair (CW+CCW) is a set of counter-rotating RC aircraft propellers perfect for use in twin and multiple motor RC airplanes or coaxial RC helicopters.  The length is 10 inches and the pitch is 4.5 inches per revolution.

  FEATURES:

  • Comes in compact sizes.
  • ESC used has an On-Board BEC.
  • Offers great performance and value for money.
  • This particular combination of motor and ESC with props gives you a smooth throttle response for the best RC experience.
  • Lightweight design makes them suitable for a wide range of Multirotor Frames.
  • Faster and Better speed control…
  • Suitable for airplanes, aircraft, quadcopter.

  SKU: n/a

  ₹1,200.00 ₹1,500.00

  Add to cart

  Add to wishlist

  Compare