For hobbyists, robot competitions, kids etc.
Size:40cm(H) x 23cm(W)
Containing the 17DOF:
1DOF of the head
4DOF of the arm
2DOF of the shoulder
2DOF of the hip
6DOF of the legs
2DOF of the feet
-60%
DIY Kits
Full Set of 17DOF Biped Robot Educational Robotic Kit+(17pcs) MG995+Servo Horn
For hobbyists, robot competitions, kids etc.
Size:40cm(H) x 23cm(W)
Containing the 17DOF:
1DOF of the head
4DOF of the arm
2DOF of the shoulder
2DOF of the hip
6DOF of the legs
2DOF of the feet
₹9,999.00 ₹25,000.00
Based on 0 reviews
Be the first to review “Full Set of 17DOF Biped Robot Educational Robotic Kit+(17pcs) MG995+Servo Horn”
Related products
-
Flight Controller & Accessories
Pixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality
-41%
Flight Controller & AccessoriesPixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality
Characteristics:
- Compatible with Alexmos2.2 or firmware below, compatible with the newest firmware BruGi_050 German, standard Russian2.2 firmwareTips
- A new generation of strong input control 32-bit processor, a circuit board with PX4FMU + PX4IO
Specifications:
- 32-bit Pixhawk PX4 Autopilot Open Code Flight Controller V2.4.8
- 2 bit 1.32 STM32F427 flash Cortex M4, with the floating-point hardware processing unit
- 2 main frequency: 256 K, RAM 168 MHZ
- 32-bit processor STM32F103 backup co
Sensors:
- Â L3GD20 3-axis 16-bit digital gyroscope
- Â LSM303D 14/3 Axis Accelerometer Magnetometer
- MPU6000 6-axis accelerometer / magnetometer
- Â MS5611 high precision barometer
Interface:
- 5 UART 1 High Voltage compatible, 2 with hardware flow control
- 2 CAN
- DSM / DSM-XÂ Spektrum compatible satellite receiver input
- SBUSÂ input and output compatible
- PPM signal input
- RSSI (PWM or input voltage)
- I2C
- SPI
- 3.3 and 6.6 VADC inputs
- external US MICRO
Package includes:
1 XÂ 2.4.8 Pixhawk main control with shell
1 XÂ Â Safety switch
1 XÂ Buzzer
1 XÂ Memory Card
Connection Wire
SKU: n/a -
Drone Accessories, Propellers
1045 Propeller 10in 10×4.5 For Drone
2 x 1045 Propellers in a set. One propeller that rotates clockwise and one that rotates anticlockwise are included in the kit, along with two propeller shaft adapters. The propeller can be used with motors of various shaft diameters thanks to the adapters. With a rating of 800-2200 kV, this 1045 propeller can be utilised with brushless motors. This propeller provides smooth flights with longer flying periods ideal for FPV and aerial photography with a low kV motor (800–1400 kV). This propeller’s high kV motor (more than 1200 kV) provides swift flights ideal for acrobatic performances. With our A2212 1000KV, 1400KV, 1800KV, and 2200KV motors and our 30A ESC, this propeller is compatible.
Item name: 1045 PropellerDiameter: 10inPitch: 4.5inPropeller diameter: 25.4cmCentre bore diameter : 6mm front and 9mm reverse side.Centre seat TH: 6mmWeight: about 14g/pairColor: black, red, yellow, green, orange.Usage: for quadcopter and multirotorPackage included:1 x CW Propeller1 x CCW PropellerSKU: n/a -
Flight Controller & Accessories
ARDUCOPTER APM 2.8 Flight Control Board for RC Multi Rotor Drone
-49%
Flight Controller & AccessoriesARDUCOPTER APM 2.8 Flight Control Board for RC Multi Rotor Drone
This is the new APM 2.8Â module. The sensors are exactly the same as with APM2.6, this version is ideal for use with multi-copters and rovers. The APM 2.8 is a complete open source autopilot system and the bestselling technology on the prestigious 2012 Outback Challenge UAV competition.
It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors. This revision of the board is designed for vehicles (especially multi-copters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. On fixed-wing aircraft, it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference.
APM 2.8 has an onboard compass so this is designed to be used with the 3DR uBlox GPS with Compass so that the GPS/Compass unit can be mounted further from noise sources than APM itself.
Features:
- Arduino Compatible
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
- Built-in compass
- Includes 3-axis gyro, accelerometer, and magnetometer, along with a high-performance barometer
- Straight Needle
- One of the first open-source autopilot systems to use Invensense’s 6 DOF Accelerometer/Gyro MPU-6000.
- Onboard 4 MegaByte Data flash chip for automatic data logging
- Optional off-board GPS, uBlox LEA-6H module with Compass.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
Package Include:
- 1 x APM 2.8 Flight Control Board
- 1 x Set of Female to Female jumper Cables
Note: Ardupilot and Arducopter Both identical.
SKU: n/a -
Batteries | Chargers and Accessories, Drone Accessories
11.1V 2200MAH LiPo Battery With IMax B3 Lipo balance Charger
-20%
Batteries | Chargers and Accessories, Drone Accessories11.1V 2200MAH LiPo Battery With IMax B3 Lipo balance Charger
11.1V 2200mAH Lipo battery is Capable of maximum continuous discharge rates up to 30C, placing this battery among the most powerful Li-Po battery packs in its class! It offers an excellent blend of weight, power, and performance. Imax B3 AC Compact Charger is a simple and compact LiPoly balance charger for 2~3s batteries. Imax B3AC makes an ideal pocket-sized charger to keep in your field box.
Applications:
It is applicable from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models
Safety Precautions:
- Avoid over-charging or over-discharging the batteries.
- Do not put it beside the high-temperature condition.
- Don’t throw it into the fire or Water
SKU: n/a
There are no reviews yet.