- Step Angle: 1.8°
- Current: 0.31 A /Phase.
- Holding Torque: 1.6 kg-cm.
- Voltage: 12~24VDC.
- No of Leads: 6.
- Weight: 220 gm.
- Type: Bi-Polar
-6%
Motors | Drivers | Pumps | Actuators
JK42HS34-0406-01 NEMA17 1.5 kg-cm Stepper Motor – Round Type Shaft
- Step Angle: 1.8°
- Current: 0.31 A /Phase.
- Holding Torque: 1.6 kg-cm.
- Voltage: 12~24VDC.
- No of Leads: 6.
- Weight: 220 gm.
- Type: Bi-Polar
₹1,580.00 ₹1,680.00
Based on 0 reviews
Be the first to review “JK42HS34-0406-01 NEMA17 1.5 kg-cm Stepper Motor – Round Type Shaft”
Related products
-
Motors | Drivers | Pumps | Actuators
12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
-38%
Motors | Drivers | Pumps | Actuators12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA 3 Pcs MG90S Mini Digital Servo Motor With Metal Gears-180° Rotation-For RC Airplanes,Helicopters
-60%
Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 3 Pcs MG90S Mini Digital Servo Motor With Metal Gears-180° Rotation-For RC Airplanes,Helicopters
- Tiny and lightweight with high output power, this tiny MG90S servo is perfect for RC Airplane, Helicopter, Quadcopter or Robot.
- This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware.
- Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller.
- You can use any servo code, hardware or library to control these servos. Suit for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
-51%
Motors | Drivers | Pumps | Actuators100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
The 100RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a
There are no reviews yet.