- Push-in Tubing O.D: 8mm
- Thread Size: R, PT, BSPT 1/8
- Fluid Admitted: Air, Vaccum, Water(no freezing)
- Body Material: PBT
- Thread Material: Nickle Plated Brass
- Thread Sealing: Teflon
- Seal, O-ring: NBR
-31%
Motors | Drivers | Pumps | Actuators
PU CONNECTOR PLL 08-01 (8mm OD X 1/8″ BSPT Male Extended Elbow)
- Push-in Tubing O.D: 8mm
- Thread Size: R, PT, BSPT 1/8
- Fluid Admitted: Air, Vaccum, Water(no freezing)
- Body Material: PBT
- Thread Material: Nickle Plated Brass
- Thread Sealing: Teflon
- Seal, O-ring: NBR
₹219.00 ₹319.00
Based on 0 reviews
Be the first to review “PU CONNECTOR PLL 08-01 (8mm OD X 1/8″ BSPT Male Extended Elbow)”
Related products
-
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 4 Pieces DC 3V-5V Micro Submersible Mini Water Pump
-20%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 4 Pieces DC 3V-5V Micro Submersible Mini Water Pump
- Rated voltage: DC3V or 4.5V, Tube size: 6mm ID x 8mm OD
- Load rated current: 0.18A, Use: diving type
- Package Included: 4x Water Pump
- Only suitable for experiments, not recommended for continuous use, if the product has any problem, please contact Gikfun customer service, we will help you to solve the problem.
- No load of water discharge capacity: 100L / H
SKU: n/a -
Motors | Drivers | Pumps | Actuators
200RPM DC 3-12V Dual Shaft BO Gear Motor For Arduino Smart Car
-27%
Motors | Drivers | Pumps | Actuators200RPM DC 3-12V Dual Shaft BO Gear Motor For Arduino Smart Car
The 200 RPM Dual Shaft BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA 3 Pcs MG90S Mini Digital Servo Motor With Metal Gears-180° Rotation-For RC Airplanes,Helicopters
-60%
Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 3 Pcs MG90S Mini Digital Servo Motor With Metal Gears-180° Rotation-For RC Airplanes,Helicopters
- Tiny and lightweight with high output power, this tiny MG90S servo is perfect for RC Airplane, Helicopter, Quadcopter or Robot.
- This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware.
- Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller.
- You can use any servo code, hardware or library to control these servos. Suit for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
-38%
Motors | Drivers | Pumps | Actuators12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)
SKU: n/a
There are no reviews yet.