SBR10UU Open Block Linear Bearing slider has a 10mm shaft diameter and comes with a metal housing. The Bearing is made up of Chrome Steel, Carbon Steel, and Nylon.
Features:
Package Includes:
1 x SBR10UU 10mm Open Block Linear Bearing Slider.
₹280.00 ₹837.00
SBR10UU Open Block Linear Bearing slider has a 10mm shaft diameter and comes with a metal housing. The Bearing is made up of Chrome Steel, Carbon Steel, and Nylon.
Features:
Package Includes:
1 x SBR10UU 10mm Open Block Linear Bearing Slider.
The Eye-Blink sensor works by illuminating the eye and eyelid area with infrared light, then monitoring the changes in the reflected light using a phototransistor and differentiator circuit.
This includes Arduino Nano, Eye Blink sensor, Buzzer, Battery, Clip Connector, and Switch.
Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
A Standard Active Buzzer Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.
This is a general 9v Battery for all your project and application needs.
A clip Connector is used to connect a 9V battery to the application. This snap power cable to DC 9V clip male line battery adapter for mostly used to power Arduino boards.
Rocker switch is Rocker Switch SPST ON/OFF Microswitch.
1 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications.
We made it available in the form of a bunch of different values as required for the project to provide convenience, so you need not find a differently required value resistor at different places while working on your project.
Description:
Material: Bakelite
Color: Like the picture show
Quantity: 1 pc
Each measures 5 x 7cm with 2520 through holes (0.1 inch industrial standard spacing) for mounting components
Referencing numbers printed on both sides for easy reference of individual holes
Specification:
Dimension: 5 x 7cm
Thickness: 1.5mm
Hole pitch: 2.54mm
Hole inner diameter: 1.0mm
Package included:
1 x 12 x 18cm PCB prototyping printed circuit experimental board
Select at least 2 products
to compare
There are no reviews yet.