Special Offer
1.4 MKS Gen L V1.0- Mega2560 R3 RAMPS 3D Printer Controller Board
₹4,900.00-
-
Raspberry Pi
Raspberry Pi 4 Model-B with 8 GB RAM
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port
- Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: n/a -
-
Basic Electronic Components
0 to 600 °C Surface Thermocouple K Type High Temperature Resistance Probe
-49%
Basic Electronic Components0 to 600 °C Surface Thermocouple K Type High Temperature Resistance Probe
The surface thermocouple is designed with k type connector with an insulated wire. It can be used with k type digital thermometer to measure the temperature with 0 to 600 °C Range of air and gas.
Features:
- Connector Type: K Type
- Measuring range: 0 to 600 °C
- Cable length: 1M
- Interface Type: flat plug-in
- Interface Length: 12.5MM
- Color: Yellow
- Accuracy : ±2.5%/0.75%
- Material: Plastic
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
0.001 Ohm 3W Surface Mount Sense Resistor
-17%
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor0.001 Ohm 3W Surface Mount Sense Resistor
It is a 0.001 Ohm 3W Surface Mount Sense Resistor. This is, in general, a low-value, high-power resistor. Ideal for all types of current sensing and pulse applications including switching and linear power supplies, instruments, power
amplifiers, shunts, power inverters, and battery management.
Package Include:
3 x 0.001 Ohm 3W Surface Mount Sense Resistor.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
0.002 Ohm 3W Surface Mount Sense Resistor (Pack of 3)
-36%
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor0.002 Ohm 3W Surface Mount Sense Resistor (Pack of 3)
It is a 0.002 Ohm 3W Surface Mount Sense Resistor. This is, in general, a low-value, high-power resistor. Ideal for all types of current sensing and pulse applications including switching and linear power supplies, instruments, power amplifiers, shunts, power inverters, and battery management.
Package Include:
3 x 0.002 Ohm 3W Surface Mount Sense Resistor.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
0.003 Ohm 3W Surface Mount Sense Resistor
-25%Basic Electronic Components, Electronic Components, Resistor, SMD Resistor0.003 Ohm 3W Surface Mount Sense Resistor
It is a 0.003 Ohm 3W Surface Mount Sense Resistor. This is, in general, a low-value, high-power resistor. Ideal for all types of current sensing and pulse applications including switching and linear power supplies, instruments, power amplifiers, shunts, power inverters, and battery management.
Package Include:
1 x 0.003 Ohm 3W Surface Mount Sense Resistor.
SKU: n/a
-
Drone Accessories, DRONE COMBO, Drone Frame and Accessories, Drone Gimbal Accessories, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & Accessories, FPV Antennas and Trans-Receivers, FPV Cameras, GPS Modules, Propellers
AEROKART INDIA UAV FULL CARBON FIBRE FRAME V650 V.22
-31%
Drone Accessories, DRONE COMBO, Drone Frame and Accessories, Drone Gimbal Accessories, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & Accessories, FPV Antennas and Trans-Receivers, FPV Cameras, GPS Modules, PropellersAEROKART INDIA UAV FULL CARBON FIBRE FRAME V650 V.22
AEROKART INDIA UAV FRAME V650 V.22 is being discontinued and will be replaced with the improved hexacopter drone, the Aurelia X4 Standard. Please read further on this page about all product upgrades.
- Built, Tested, and Configured Tarot 650 v2.2
- Carry Specialized Payloads With Ease
- Carry Up To 3.3 lb (1.5 kg) Payload UPTO.
- Up To 2 mi (3.2 km) Range & 25 Minute Flight Time
- Powered By Open-Source Pixhawk & Ardupilot / PX4
- Can Be Customized Depending On Customer Requirements – Ask Us!
- Global International Shipping!
Looking for a larger option that carries more weight? Check out our Aurelia X6 Standard Ready To Fly, Aurelia X6 Pro Ready To Fly, or the largest drone with the largest payload capacity.
SKU: n/a -
Flight Controller & Accessories
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
-57%
Flight Controller & AccessoriesPixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
SKU: n/a -
-
Electronic Components
140 RPM BO Motor-Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 140 RPM
- Rated Torque: 0.35 Kgcm
SKU: n/a
Products Grid
-
Motors | Drivers | Pumps | Actuators
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: n/a -
-
Basic Electronic Components
0 to 600 °C Surface Thermocouple K Type High Temperature Resistance Probe
Basic Electronic Components0 to 600 °C Surface Thermocouple K Type High Temperature Resistance Probe
The surface thermocouple is designed with k type connector with an insulated wire. It can be used with k type digital thermometer to measure the temperature with 0 to 600 °C Range of air and gas.
Features:
- Connector Type: K Type
- Measuring range: 0 to 600 °C
- Cable length: 1M
- Interface Type: flat plug-in
- Interface Length: 12.5MM
- Color: Yellow
- Accuracy : ±2.5%/0.75%
- Material: Plastic
SKU: n/a
-
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
0.001 Ohm 3W Surface Mount Sense Resistor
-17%Basic Electronic Components, Electronic Components, Resistor, SMD Resistor0.001 Ohm 3W Surface Mount Sense Resistor
It is a 0.001 Ohm 3W Surface Mount Sense Resistor. This is, in general, a low-value, high-power resistor. Ideal for all types of current sensing and pulse applications including switching and linear power supplies, instruments, power
amplifiers, shunts, power inverters, and battery management.
Package Include:
3 x 0.001 Ohm 3W Surface Mount Sense Resistor.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
0.002 Ohm 3W Surface Mount Sense Resistor (Pack of 3)
-36%Basic Electronic Components, Electronic Components, Resistor, SMD Resistor0.002 Ohm 3W Surface Mount Sense Resistor (Pack of 3)
It is a 0.002 Ohm 3W Surface Mount Sense Resistor. This is, in general, a low-value, high-power resistor. Ideal for all types of current sensing and pulse applications including switching and linear power supplies, instruments, power amplifiers, shunts, power inverters, and battery management.
Package Include:
3 x 0.002 Ohm 3W Surface Mount Sense Resistor.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
0.003 Ohm 3W Surface Mount Sense Resistor
-25%Basic Electronic Components, Electronic Components, Resistor, SMD Resistor0.003 Ohm 3W Surface Mount Sense Resistor
It is a 0.003 Ohm 3W Surface Mount Sense Resistor. This is, in general, a low-value, high-power resistor. Ideal for all types of current sensing and pulse applications including switching and linear power supplies, instruments, power amplifiers, shunts, power inverters, and battery management.
Package Include:
1 x 0.003 Ohm 3W Surface Mount Sense Resistor.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
0.005 Ohm 3W Surface Mount Sense Resistor (Pack of 3)
-36%Basic Electronic Components, Electronic Components, Resistor, SMD Resistor0.005 Ohm 3W Surface Mount Sense Resistor (Pack of 3)
It is a 0.005 Ohm 3W Surface Mount Sense Resistor. This is, in general, a low-value, high-power resistor.
Package Include:
3 x 0.005 Ohm 3W Surface Mount Sense Resistor.
SKU: n/a
Best Sellers
Added
RunCam Phoenix 2 SP 1500TVL Starlight Night Camera 128 FOV Freestyle Camera Wide Dynamic Camera FPV
RunCam Phoenix 2 SP 1500TVL Starlight Night Camera 128 FOV Freestyle Camera Wide Dynamic Camera FPV
DIY F450 Carbon Fiber Quadcopter Frame Kit With APM2.8 Flight Control M7N GPS 30A ESC 2212 920KV Motor RC Training Drones
DIY F450 Carbon Fiber Quadcopter Frame Kit With APM2.8 Flight Control M7N GPS 30A ESC 2212 920KV Motor RC Training Drones
1.model number F450
Made in India Daspilot flight controller
Pixhawk PX4 Autopilot 2.4.8 32 Bit Flight Controller kit With Telemetry and GPSv
Pixhawk PX4 Autopilot 2.4.8 32 Bit Flight Controller kit With Telemetry and GPSv
1 x Pixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality
1 x GPS Module Ublox NEO-7M With Electronic Compass for Apm/Pixhawk
1 x 3DR 100mW Radio Telemetry 433MHZ For APM PX4 Pixhawk
1 x Plastic GPS stand Antenna Foldable Mount Holder
MADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India
MADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India
1. 10-inch Diameter with 5 Pitch for optimal balance between thrust and efficiency
2. Tri-Blade Design for increased thrust, stability and rigidity
3. Made from Glass Fibre Reinforced Nylon for superior durability and performance
4. Lightweight Build – only 23 gm +- 5%, reduces load on motors
5. 18 mm Hub Diameter, 9 mm Hub Thickness and 5 mm Shaft Compatibility
Combo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino
Combo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino
Intel® RealSense™ Depth Camera D435IF
| Model | Depth Camera D435if | |
| Features | Use environment: | Indoor/Outdoor |
| Ideal Range: | .3 m to 3 m | |
| Depth | Depth technology: | Stereoscopic |
| Minimum Depth Distance (Min-Z) at Max Resolution: | ~28 cm | |
| Depth Accuracy: | <2% at 2 m(2) | |
| Image sensor technology: | Global Shutter | |
| Depth Field of View (FOV): | 87° × 58°(1) | |
| Depth output resolution: | Up to 1280 × 720 | |
| Depth frame rate: | Up to 90 fps | |
| Filter | Depth Filter | IR Pass |
| RGB Filter | IR Cut | |
| RGB | RGB frame resolution: | Up to 1920 × 1080 |
| RGB frame rate: | 30 fps | |
| RGB sensor technology: | Rolling Shutter | |
| RGB sensor FOV (H × V): | 69 × 42°(1) | |
| RGB sensor resolution | 2 MP | |
| Major Components | Camera module: | Intel RealSense Module D430 + RGB Camera |
| Vision Processor Board: | Intel RealSense Vision Processor D4 | |
| Physical | Form factor: | Camera Peripheral |
| Connectors: | USB‑C* 3.1 Gen 1* | |
| Length × Depth × Height: | 90 mm × 25.8 mm × 25 mm | |
| Mounting mechanism: |
One 1/4‑20 UNC thread mounting point
Two M4 thread mounting points
|
Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development
Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development
The Cora Z7 is our most cost-optimized SoC development board featuring the power and flexibility of AMD’s Zynq®-7000 SoC family.
Featuring Arduino™ headers, 1Gbps Ethernet, an onboard analog-to-digital converter, and Pmod ports, the Cora Z7 can be used in a variety of embedded applications. The Zynq-7000(S) SoC family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, delivering cost-optimized system integration. At such a friendly price point, the Cora Z7 is a great development board to get started with Zynq-based designs.
The Cora Z7 is supported by AMD’s Vivado ML, including the free Vivado ML Standard Edition. You can also interact with the processing system (PS) with AMD Vitis Unified Software Platform and PetaLinux Tools.
Premium Hexacopter Drone Combo Set with Pixhawk For Flower Dropping Drone
Premium Hexacopter Drone Combo Set with Pixhawk For Flower Dropping Drone
1 x Set Of Radiolink Pixhawk 2.4.8 Flight controller with accessories
1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver for RC FPV Drone
1 x DJI F550 Frame
1 x Landing Gear
6 x Readytosky 920kv motor(3cw + 3ccw)
6 x BLHeli LittleBee 30A ESC (OPTO) 2-6SLipo
1 x power module for Pixhawk
1 x Ubolx neo M8N gps
1 x GPS stand|
3 x 1045 Carbon fiber propeller
1 x Mg996 metal gear servo
1 x Lm2596 power supply for servo
1 x Shock absorber
FPV DRONE KIT Kit with Crossflight
1 x QAV250 V2 Carbon Fiber Frame
1 xFlySky FS-i6 Transmitter
4 x BLHeli LittleBee 30A ESC
4 x Readytosky 2205 2300KV Brushless Motors ( 2 CW – 2 CCW )
4 x 5045 3-Blade Propellers
1 x Radiolink crossflight Flight Controller
1 x Readytosky 20cm Nylon Strap Belt for RC Lipo Battery
1 x Shock Absorber Set
Quadcopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
Quadcopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)
1 x Pixhawk Flight controller board
1 x DJI F450 Quadcopter Frame Kit
4 x A2212 1000KV Brushless Motor For RC Airplane / Quadcopter
4 x 30A Brushless ESC
2 x 1045 Propeller 10in 10×4.5 For Drone
1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver
1 x APM Pixhawk Power Module with XT60
1 x Nylon Strap Belt for RC Lipo Battery
1 x 3D printed Shock Absorber Anti-vibration Set for APM Pixhawk
ADS1231IDR – 24-Bit 80SPS 1-Ch Delta-Sigma ADC IC
The ADS1231IDR – 24-Bit 80SPS 1-Ch Delta-Sigma ADC IC in an SOIC package offers precise analog-to-digital conversion with a resolution of 24 bits and a sampling rate of 80 samples per second (S/s). It operates with an input range of 3V to 5.3V, providing low power consumption of just 5mW. This ADC features a bipolar polarity and interfaces via SPI. It is designed for use in applications requiring high-resolution conversion, such as in measurement and control systems. The device is lead-free, RoHS compliant, and has a maximum operating temperature of 85°C and a minimum operating temperature of -40°C.
Features :
Resolution: 24 bits for high-precision conversion.
Sampling Rate: 80 samples per second (S/s).
Interface: SPI (Serial Peripheral Interface).
Operating Voltage: 3V to 5.3V, with a nominal supply of 5V.
Low Power: Power consumption of 5 mW.
Temperature Range: -40°C to 85°C.
MCP3208-CI/P-MICROCHIP-MCP3208-CI/P-Analogue to Digital Converter, 12 bit, 100 kSPS, Pseudo Differential, Single Ended, Serial, SPI
MCP3208-CI/P-MICROCHIP-MCP3208-CI/P-Analogue to Digital Converter, 12 bit, 100 kSPS, Pseudo Differential, Single Ended, Serial, SPI
The MCP3208-CI/P is an 8 channel, 12bit Analogue to Digital Converter (ADC) with SPI interface in 16 pin DIP package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3208 features successive approximation register (SAR) architecture with onboard sample and hold circuitry allowing 12bit ADC capability to be added to any PIC microcontroller. It is programmable to provide four pseudo differential input pairs or eight single ended inputs. Differential nonlinearity (DNL) is specified at ±1LSB and integral nonlinearity (INL) is ±2LSB. Communication with devices is accomplished using simple serial interface compatible with SPI protocol. Low current design permits operation with typical standby and active currents of only 500nA (2μA maximum) and 320μA (400μA maximum) respectively.
Specifications:
Operating Temperature Min: -40°C
No. of Pins: 16Pins
Product Range: Octal 12-Bit SAR ADCs
Operating Temperature Max: 85°C
Supply Voltage Min: 2.7V
Supply Voltage Max: 5.5V
ADC / DAC Case Style: DIP
Data Interface: Serial, SPI
Sampling Rate: 100kSPS
Supply Voltage Type: Single
Resolution (Bits): 12bit
Input Channel Type: Pseudo Differential, Single Ended
MIC2288YD5-TR-MICROCHIP-DC-DC Switching Boost (Step Up) Regulator, Adjustable, 2.5V-10Vin, 3.6V-34Vout, 1Aout, SOT-23-5
MIC2288YD5-TR-MICROCHIP-DC-DC Switching Boost (Step Up) Regulator, Adjustable, 2.5V-10Vin, 3.6V-34Vout, 1Aout, SOT-23-5
The MIC2288YD5 TR is a 1A 1.2MHz PWM Boost Converter in low-profile. It implements a constant frequency, current mode control scheme with internal compensation that offers excellent transient response and output regulation performance. The high frequency operation saves board space by allowing small and external components. The fixed frequency PWM topology also reduces spurious switching noise and ripple to the input power source.
Features:
MCP3202-BI/P 12-Bit Dual Channel A/D Converter (ADC) with SPI Interface IC DIP-8 Package
MCP3202-BI/P 12-Bit Dual Channel A/D Converter (ADC) with SPI Interface IC DIP-8 Package
The MCP3202-BI/P 12-Bit P is a 12-bit analog-to-digital converter (ADC) with SPI serial interface and on-board sample-and-hold circuitry. It is designed for applications such as sensor interface, process control, and data acquisition, especially in battery-operated systems. The MCP3202-BI/P 12-Bit offers programmable analog inputs, allowing for either single-ended or pseudo-differential pairs. It operates over a wide voltage range and offers a low-power design for efficient performance.
