Aerokart India

Pixhawk 2.4.8 32bit ARM Flight Controller x 1

Safety button x 1

Buzzer x 1

Micro SD TF card x1

M7N GPS with GPS holder× 1

Cables

power module x 1

DRONE COMBO, Flight Controller & Accessories

Pixhawk PX4 Autopilot 2.4.8 32 Bit Flight Controller kit With Telemetry and GPSv

-32%

DRONE COMBO, Flight Controller & Accessories

Pixhawk PX4 Autopilot 2.4.8 32 Bit Flight Controller kit With Telemetry and GPSv

1 x Pixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality

1 x GPS Module Ublox NEO-7M With Electronic Compass for Apm/Pixhawk

1 x 3DR 100mW Radio Telemetry 433MHZ For APM PX4 Pixhawk

1 x Plastic GPS stand Antenna Foldable Mount Holder

Drone Frame and Accessories, Drone Parts, Propellers

MADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India

-28%

Drone Frame and Accessories, Drone Parts, Propellers

MADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India

1.⁠ ⁠10-inch Diameter with 5 Pitch for optimal balance between thrust and efficiency
2.⁠ ⁠Tri-Blade Design for increased thrust, stability and rigidity
3.⁠ ⁠Made from Glass Fibre Reinforced Nylon for superior durability and performance
4.⁠ ⁠Lightweight Build – only 23 gm +- 5%, reduces load on motors
5.⁠ ⁠18 mm Hub Diameter, 9 mm Hub Thickness and 5 mm Shaft Compatibility

DIY Kits, DIY Learning and Robot Kits

Combo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino

-24%

DIY Kits, DIY Learning and Robot Kits

Combo of Power Supply Module with Jumper Wire and Battery Clip, 830 & 400 tie-Points Breadboard Kit for Arduino

Wire Type: 40 pin Male to Male Jumper Wire

Breadboard Power Supply Module

Module: Compatible with 5V, 3.3V

9V battery clip connector

Clip connector with 3.5mm jack

400 & 830-point half-size Solderless breadboard

Intel® RealSense™ Depth Camera D435IF

-18%

Intel® RealSense™ Depth Camera D435IF

	Model	Depth Camera D435if
Features	Use environment:	Indoor/Outdoor
Features	Ideal Range:	.3 m to 3 m
Depth	Depth technology:	Stereoscopic
	Minimum Depth Distance (Min-Z) at Max Resolution:	~28 cm
	Depth Accuracy:	<2% at 2 m⁽²⁾
	Image sensor technology:	Global Shutter
	Depth Field of View (FOV):	87° × 58°⁽¹⁾
	Depth output resolution:	Up to 1280 × 720
	Depth frame rate:	Up to 90 fps
Filter	Depth Filter	IR Pass
Filter	RGB Filter	IR Cut
RGB	RGB frame resolution:	Up to 1920 × 1080
	RGB frame rate:	30 fps
	RGB sensor technology:	Rolling Shutter
	RGB sensor FOV (H × V):	69 × 42°⁽¹⁾
	RGB sensor resolution	2 MP
Major Components	Camera module:	Intel RealSense Module D430 + RGB Camera
Major Components	Vision Processor Board:	Intel RealSense Vision Processor D4
Physical	Form factor:	Camera Peripheral
	Connectors:	USB‑C* 3.1 Gen 1*
	Length × Depth × Height:	90 mm × 25.8 mm × 25 mm
	Mounting mechanism:	One 1/4‑20 UNC thread mounting point Two M4 thread mounting points

Batteries | Chargers and Accessories

Bonka 1000 mah 2s 7.4v 35c xt60

-15%

Batteries | Chargers and Accessories

Bonka 1000 mah 2s 7.4v 35c xt60

Model No: Bonka 1000 2S 10002s

Voltage: 11.1V

Max Continuous Discharge: 35C

Balance Plug: JST-XH

Discharge Plug: XT-60

Dimensions: 12 x 34 x 72mm

Weigt: 50g

ARM Microcontroller, AVR Development Board, Development Boards

Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development

-69%

ARM Microcontroller, AVR Development Board, Development Boards

Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development

The Cora Z7 is our most cost-optimized SoC development board featuring the power and flexibility of AMD’s Zynq^®-7000 SoC family.

Featuring Arduino™ headers, 1Gbps Ethernet, an onboard analog-to-digital converter, and Pmod ports, the Cora Z7 can be used in a variety of embedded applications. The Zynq-7000(S) SoC family integrates the software programmability of an ARM®-based processor with the hardware programmability of an FPGA, delivering cost-optimized system integration. At such a friendly price point, the Cora Z7 is a great development board to get started with Zynq-based designs.

The Cora Z7 is supported by AMD’s Vivado ML, including the free Vivado ML Standard Edition. You can also interact with the processing system (PS) with AMD Vitis Unified Software Platform and PetaLinux Tools.

SKU: n/a

Premium Hexacopter Drone Combo Set with Pixhawk For Flower Dropping Drone

-38%

Premium Hexacopter Drone Combo Set with Pixhawk For Flower Dropping Drone

1 x Set Of Radiolink Pixhawk 2.4.8 Flight controller with accessories
1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver for RC FPV Drone
1 x DJI F550 Frame
1 x Landing Gear
6 x Readytosky 920kv motor(3cw + 3ccw)
6 x BLHeli LittleBee 30A ESC (OPTO) 2-6SLipo
1 x power module for Pixhawk
1 x Ubolx neo M8N gps
1 x GPS stand|
3 x 1045 Carbon fiber propeller
1 x Mg996 metal gear servo
1 x Lm2596 power supply for servo
1 x Shock absorber

FPV DRONE KIT Kit with Crossflight

-15%

FPV DRONE KIT Kit with Crossflight

1 x QAV250 V2 Carbon Fiber Frame

1 xFlySky FS-i6 Transmitter

4 x BLHeli LittleBee 30A ESC

4 x Readytosky 2205 2300KV Brushless Motors ( 2 CW – 2 CCW )

4 x 5045 3-Blade Propellers

1 x Radiolink crossflight Flight Controller

1 x Readytosky 20cm Nylon Strap Belt for RC Lipo Battery

1 x Shock Absorber Set

Quadcopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)

-15%

Quadcopter Drone Combo with Pixhawk Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX Flysky FSi6+ Power module + Belt)

1 x Pixhawk Flight controller board

1 x DJI F450 Quadcopter Frame Kit

4 x A2212 1000KV Brushless Motor For RC Airplane / Quadcopter

4 x 30A Brushless ESC

2 x 1045 Propeller 10in 10×4.5 For Drone

1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver

1 x APM Pixhawk Power Module with XT60

1 x Nylon Strap Belt for RC Lipo Battery

1 x 3D printed Shock Absorber Anti-vibration Set for APM Pixhawk

Batteries, Batteries | Chargers and Accessories, DIY Kits

MADE IN INDIA 18000MAH 14.8 VOLT LI-ION PRODUCT

-41%

Batteries, Batteries | Chargers and Accessories, DIY Kits

MADE IN INDIA 18000MAH 14.8 VOLT LI-ION PRODUCT

PRODUCT DETAILS :-

MAH -18000MAH

TYPE -LI ION

BMS INCLUDED

VOLT -14.8

BIS CERTIFIED CELL

ADS1231IDR – 24-Bit 80SPS 1-Ch Delta-Sigma ADC IC

-62%

ADS1231IDR – 24-Bit 80SPS 1-Ch Delta-Sigma ADC IC

The ADS1231IDR – 24-Bit 80SPS 1-Ch Delta-Sigma ADC IC in an SOIC package offers precise analog-to-digital conversion with a resolution of 24 bits and a sampling rate of 80 samples per second (S/s). It operates with an input range of 3V to 5.3V, providing low power consumption of just 5mW. This ADC features a bipolar polarity and interfaces via SPI. It is designed for use in applications requiring high-resolution conversion, such as in measurement and control systems. The device is lead-free, RoHS compliant, and has a maximum operating temperature of 85°C and a minimum operating temperature of -40°C.
Features :
Resolution: 24 bits for high-precision conversion.
Sampling Rate: 80 samples per second (S/s).
Interface: SPI (Serial Peripheral Interface).
Operating Voltage: 3V to 5.3V, with a nominal supply of 5V.
Low Power: Power consumption of 5 mW.
Temperature Range: -40°C to 85°C.

MCP3208-CI/P-MICROCHIP-MCP3208-CI/P-Analogue to Digital Converter, 12 bit, 100 kSPS, Pseudo Differential, Single Ended, Serial, SPI

-57%

MCP3208-CI/P-MICROCHIP-MCP3208-CI/P-Analogue to Digital Converter, 12 bit, 100 kSPS, Pseudo Differential, Single Ended, Serial, SPI

The MCP3208-CI/P is an 8 channel, 12bit Analogue to Digital Converter (ADC) with SPI interface in 16 pin DIP package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3208 features successive approximation register (SAR) architecture with onboard sample and hold circuitry allowing 12bit ADC capability to be added to any PIC microcontroller. It is programmable to provide four pseudo differential input pairs or eight single ended inputs. Differential nonlinearity (DNL) is specified at ±1LSB and integral nonlinearity (INL) is ±2LSB. Communication with devices is accomplished using simple serial interface compatible with SPI protocol. Low current design permits operation with typical standby and active currents of only 500nA (2μA maximum) and 320μA (400μA maximum) respectively.

Specifications:

Operating Temperature Min: -40°C
No. of Pins: 16Pins
Product Range: Octal 12-Bit SAR ADCs
Operating Temperature Max: 85°C
Supply Voltage Min: 2.7V
Supply Voltage Max: 5.5V
ADC / DAC Case Style: DIP
Data Interface: Serial, SPI
Sampling Rate: 100kSPS
Supply Voltage Type: Single
Resolution (Bits): 12bit
Input Channel Type: Pseudo Differential, Single Ended

MIC2288YD5-TR-MICROCHIP-DC-DC Switching Boost (Step Up) Regulator, Adjustable, 2.5V-10Vin, 3.6V-34Vout, 1Aout, SOT-23-5

-61%

MIC2288YD5-TR-MICROCHIP-DC-DC Switching Boost (Step Up) Regulator, Adjustable, 2.5V-10Vin, 3.6V-34Vout, 1Aout, SOT-23-5

Stable with ceramic capacitors

The MIC2288YD5 TR is a 1A 1.2MHz PWM Boost Converter in low-profile. It implements a constant frequency, current mode control scheme with internal compensation that offers excellent transient response and output regulation performance. The high frequency operation saves board space by allowing small and external components. The fixed frequency PWM topology also reduces spurious switching noise and ripple to the input power source.

Features:

High efficiency

low input and output ripple

Output over voltage protection

Over-temperature shutdown

-40 to 125°C Junction temperature range

MCP3202-BI/P 12-Bit Dual Channel A/D Converter (ADC) with SPI Interface IC DIP-8 Package

-60%

MCP3202-BI/P 12-Bit Dual Channel A/D Converter (ADC) with SPI Interface IC DIP-8 Package

Single-ended or pseudo-differential inputs

The MCP3202-BI/P 12-Bit P is a 12-bit analog-to-digital converter (ADC) with SPI serial interface and on-board sample-and-hold circuitry. It is designed for applications such as sensor interface, process control, and data acquisition, especially in battery-operated systems. The MCP3202-BI/P 12-Bit offers programmable analog inputs, allowing for either single-ended or pseudo-differential pairs. It operates over a wide voltage range and offers a low-power design for efficient performance.

Features :

On-chip sample-and-hold

Low power consumption: Standby current 0.5µA

Operating voltage range: 2.7V to 5.5V

Throughput rate: Up to 100 ksps

Gain error: ±1.25 LSB (typical)

Operating temperature: -40°C to +85°C

TLC7135CDWR 1/2-Digit Precision Analog-to-Digital Converters IC SMD-28 Package

-58%

TLC7135CDWR 1/2-Digit Precision Analog-to-Digital Converters IC SMD-28 Package

TLC7135CDWR 1/2-Digit Precision Analog-to-Digital Converters IC

MCP3421A0T-E/CH – 18-Bit Analog-to-Digital Converter I2C Interface On-Board Reference 6pin SOT-23 Microchip Technology

-51%

MCP3421A0T-E/CH – 18-Bit Analog-to-Digital Converter I2C Interface On-Board Reference 6pin SOT-23 Microchip Technology

the Microchip Technology MCP3421A0T ADC in an SOT-23 package is an 18-bit analog-to-digital converter designed for low-power applications. With a single channel and 3.75 S/s sampling rate, this device operates with a reference voltage of 2.048 V and supports I2C/serial/2-wire interfaces. It operates within a 2.7V to 5.5V supply range, consumes only 155 µA of current, and has an operating temperature range from -40°C to 125°C.
Features :
Resolution: 18 bits
Channels: 1
Interface: I2C, Serial, 2-Wire
Supply Voltage: 2.7V to 5.5V
Reference Voltage: 2.048V
Power Consumption: 155 µA
Sampling Rate: 3.75 S/s
Operating Temp Range: -40°C to 125°C

TC7660SCOA-MICROCHIP-DC/DC Inductorless Adjustable Inverter, 1.5 V to 12 V in, -12 V to -1.5 V/20 mA out, SOIC-8

-46%

TC7660SCOA-MICROCHIP-DC/DC Inductorless Adjustable Inverter, 1.5 V to 12 V in, -12 V to -1.5 V/20 mA out, SOIC-8

RS-232 Negative Power Supply

The TC7660S device is a pin-compatible replacement for the industry standard 7660 charge pump voltage converter. It converts a +1.5V to +12V input to a corresponding -1.5V to -12V output using only two low-cost capacitors, eliminating inductors and their associated cost, size, and electromagnetic interference (EMI). Added features include an extended supply range to 12V, and a frequency boost pin for higher operating frequency, allowing the use of smaller external capacitors.
The onboard oscillator operates at a nominal frequency of 10 kHz. Frequency is increased to 45 kHz when pin 1 is connected to V+. Operation below 10 kHz (for lower supply current applications) is possible by connecting an external capacitor from OSC to the ground (with pin 1 open). The TC7660S is available in 8-pin PDIP and 8-pin Small Outline (SOIC) packages in commercial and extended temperature ranges.

Applications:

Simple Conversion of +5V to ±5V Supplies

Voltage Multiplication VOUT = ± n V+

Negative Supplies for Data Acquisition Systems
and Instrumentation

MAX31855KASA+T – 1-Ch 14bits Thermocouple-to-Digital Converter SPI Remote Sensor IC SMD-8 Package

-62%

MAX31855KASA+T – 1-Ch 14bits Thermocouple-to-Digital Converter SPI Remote Sensor IC SMD-8 Package