Development Boards
Showing 1–24 of 269 results
-
Development Boards
10A Motor Driver Shield – MD10
- Bi-directional control of 1 brushed DC motor.
- Support motor voltage ranges from 7V to 25V, .
- Maximum current up to 10A continuous and 15A peak (10 seconds).
- Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 10KHz.
- Selectable digital pins for PWM and DIR.
SKU: n/a -
-
-
Development Boards
2.4″ Inch Touch Screen TFT Display Shield for Arduino UNO Mega
- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
SKU: n/a -
-
Development Boards
3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno
- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
SKU: n/a -
Development Boards
A203 (Version 2) Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (Wi-fi, Bluetooth, SSD supported etc.)
-8%
Development BoardsA203 (Version 2) Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (Wi-fi, Bluetooth, SSD supported etc.)
- Product: A203 (Version 2) Carrier Board
- Brand: Seeed Studio
- NVIDIA Gigabit Ethernet: RJ45 Gigabit Ethernet Connector (10/100/1000)
- DC Power: DC Input Power TE Connector
- Compact size (87mm x 52mm x 26mm) saves precious space
- Compact & all-in-one design
SKU: n/a -
-
Development Boards
A205 Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (6 CSI Camera, 2 HDMI, 5 SATA, M.2 key E supported etc.)
-2%
Development BoardsA205 Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (6 CSI Camera, 2 HDMI, 5 SATA, M.2 key E supported etc.)
- Brand: Seeed Studio
- Product: A205 Carrier Board
- Ethernet: 2x Gigabit Ethernet (10/100/1000M)
- PCB Size / Overall Size: 170mm x 100mm
- SATA: 1 x 5 SATA
SKU: n/a -
-
Development Boards
Adafruit ESP32 Feather V2 – 8MB Flash + 2 MB PSRAM – STEMMA QT
- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual-mode Bluetooth (classic and BLE)
- On-board PCB antenna
- Ultra-low noise analog amplifier
SKU: n/a -
-
Development Boards
Adafruit Feather RP2040
- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
SKU: n/a -
