Electronic Modules and Displays
Showing all 11 results
-
Electronic Modules, Electronic Modules and Displays
1Pcs 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V
-34%
Electronic Modules, Electronic Modules and Displays1Pcs 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V
- Can be used for multimeter, converted to lithium battery charging
- Note: The OUT+Port can output an adjustable voltage
- Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC,Charging voltage: 4.2V DC
- Charging current: Max. 1A Discharging current: Max. 2A
- Package Includes: 1x Step Up Boost Module
SKU: n/a -
Batteries | Chargers and Accessories, Electronic Modules, Electronic Modules and Displays
3S 11.1V 12V 12.6V Lithium Battery Capacity Indicator Module
-15%
Batteries | Chargers and Accessories, Electronic Modules, Electronic Modules and Displays3S 11.1V 12V 12.6V Lithium Battery Capacity Indicator Module
This is 3S 11.1V 12V 12.6V Lithium Battery Capacity Indicator Module, Lipo Li-ion Power Level Display Board 3 Series 9-26V.
Features:
Type: Voltage regulator
Input voltage range: 9-26 V
Package Includes:1 x 3S 11.1V 12V 12.6V Lithium Battery Capacity Indicator Module
SKU: n/a -
Electronic Modules, Uncategorized
AEROKART INDIA 3.3V/5V Breadboard power module+MB-102 830 points Solderless Prototype Bread board kit +40 Male to Male Jumper wires
-42%
Electronic Modules, UncategorizedAEROKART INDIA 3.3V/5V Breadboard power module+MB-102 830 points Solderless Prototype Bread board kit +40 Male to Male Jumper wires
- Solderless breadboard (MB-102)
- Jumper wire size: 20 CM
- Input Voltage : 6.5-12V (DC)
- Maximum Output Current: < 700ma
- Can be switched to 0V, 3.3V, 5V
SKU: n/a -
DIY Learning and Robot Kits, Electronic Modules, Sensors
Arduino Uno with LCD and Keypad
Arduino UNO-based kit provides an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It contains all of the essential components required to start programming with the Arduino Uno board.
This combo includes Arduino Uno with cable, 4×4 membrane keypad, 16×2 LCD Display, 3 types of Jumper Wires.
Arduino Uno R3 Compatible Board is a microcontroller board that is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has everything needed to support the microcontroller, you need to simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
LCD1602 Parallel LCD Display provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast.
Matrix Keypad 4 X 4 has 16 buttons, arranged in a telephone-line 3×4 grid with a column of 4 characters (A, B, C, and D). The keys are connected into a matrix, hence only 8 microcontroller pins (4-columns and 4-rows) are required to scan the pad.
Applications:
- Security System
- Calculator
- Device Control
SKU: n/a -
-
Electronic Modules
Chip Antenna 2400MHz
This is PCB Antenna having a frequency of 24002483 MHz and 1.8 dBi gain. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.
Application: Wi-fi, Bluetooth, Zig-bee, ISM.
Features:
- Compact Size
- High quality
- Low cost
- 3M high-quality adhesive
- Masking for corrosion-free
Package Includes:
1 x Chip Antenna 2400MHz
Specifications :-
Model LWC-2400-CHIP-03 (V1.0) Frequency Range 2400 ~ 2483 MHz Gain ~1.8 dBi Impedance () 50 VSWR < 2.0 Polarization Linear Power Handling (W) 10 HPBW H: 3600 / V: 30 Cable 0.81 or 1.13mm Mini Coaxial Connector MHF1 Operating Temperature (C) -30 to 60 Humidity 5 95% Length (mm) 27 Width (mm) 7 Height (mm) 2 Weight (gm) 5 SKU: n/a -
Electronic Modules, Electronic Modules and Displays, Uncategorized
Hot Glue Gun 40W
Hot Melt Easy To Use Multi-Purpose Glue Gun for Almost All Bonding Jobs of Any Office and House. Trigger-feed For Even Glue Flow Perfect for Home Repairs, Hobbies And Crafts Lower Temperature For Delicate Materials And Safety Two Finger Trigger For Better Control.
Package Content:
1 x Glue Gun 40W
SKU: n/a -
Electronic Modules, Electronic Modules and Displays
IOT Combo for Home Automation
NodeMCU ESP-8266 WIFI Board CP2102. The Development Kit based on ESP8266 integrates GPIO, PWM, IIC, 1-Wire, and ADC all in one board. Power your development in the fastest way combines with NodeMCU Firmware! R2 version had CP2102 USB-TTL instead, larger current support, the slim board can put on a breadboard.
This is a 5V single Channel Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on can control it. The module is triggered with, high trigger current of less than 5mA. it Can be used for microcontroller development board module or home appliance control.
This is the combo of 20CM Wire Color Jumper Cable, M-M, M-F, F-F 10PCS of wire in each strip of cable. It is very flexible and easily detachable to no. of wires to your requirement. Mostly it can be used for Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini PC and development boards. It is very useful in PCB project, PC motherboard, as well as Breadboard connections.
Breadboard GL-12 840 Tie Points is a construction base for prototyping electronics. The term “breadboard” is commonly used to refer to a solder-less breadboard.
SKU: n/a -
Batteries | Chargers and Accessories, Electronic Modules, Electronic Modules and Displays
Li-Ion 18650 3.7V 2500MAH Battery-1C
Batteries | Chargers and Accessories, Electronic Modules, Electronic Modules and DisplaysLi-Ion 18650 3.7V 2500MAH Battery-1C
This Li-Ion 18650 3.7V 2500MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with 2500 mAh capacity. It is very convenient to install in your project to fulfill a 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible battery adapter/holder or it can be permanently soldered to your application’s power source wires.
Features:
- High performance and capacity
- High energy density.
- Excellent storage performance and low self-discharge rate
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Flat top to suit many devices fitting.
- High energy density
- High working voltage for single battery cells.
- Pollution-free, Long cycle life
- No memory effect
- Lightweight, small size
- Shape: Cylindrical Battery
- Battery Type: Lithium-Ion Battery
Application:
- Portable equipment: POS, Portable printer, handset.
- Medical instrument: B ultrasound, Ecg monitoring instrument
- Military equipment: IR telescope
- Consumer electronics:PDA,MID,laptop,emergency light power source
- power tool e-bicycle
- Industrial and commercial instrument: light power meter, Gas testing instruments, fusion splicer, flaw detector
- Electric toy:RC car/ boat/helicopter
Package includes:
Li-Ion 18650 3.7V 2500MAH Battery-1C
SKU: n/a -
Basic Electronic Components, DIY Kits, DIY Learning and Robot Kits, Electronic Components, Electronic Hobby Kit, Electronic Modules and Displays
Plusivo Hook Up Wire Kit Plusivo 20AWG Hook Up Wire Kit – 600V Pre-Tinned Stranded Silicon Wire of 6 Colours x 7M
-50%
Basic Electronic Components, DIY Kits, DIY Learning and Robot Kits, Electronic Components, Electronic Hobby Kit, Electronic Modules and DisplaysPlusivo Hook Up Wire Kit Plusivo 20AWG Hook Up Wire Kit – 600V Pre-Tinned Stranded Silicon Wire of 6 Colours x 7M
Package Included:
- 1 x Black Wire (23ft)
- 1 x Yellow Wire (23ft)
- 1 x Green Wire (23ft)
- 1 x Blue Wire (23ft)
- 1 x White Wire (23ft)
- 1 x Heatshrink Tubes for each color
- 1 x Colored Wire Ties for each color
- 1 x Mini Wire Stripper Tool
SKU: n/a -
Electronic Hobby Kit, Electronic Modules and Displays, Wire Wound Inductors
Plusivo Hook Up Wire Kit Plusivo 24AWG Hook up Wire Kit – 600V Pre-Tinned Stranded Silicon Wire of 6 Colors x 9M
-50%Electronic Hobby Kit, Electronic Modules and Displays, Wire Wound InductorsPlusivo Hook Up Wire Kit Plusivo 24AWG Hook up Wire Kit – 600V Pre-Tinned Stranded Silicon Wire of 6 Colors x 9M
Description:
Plusivo Hook Up Wire Kit includes super flexible and high-quality assorted coloured stranded wires (Black, Red, Yellow, Green, Blue, and White). This Plusivo Hook Up Wire Kit has a wide scope of applications like wiring appliances, DIY projects, 3D printers, and other electronic projects for electrical use.
This Plusivo Hook Up Wire Kit contains 6 spools of gauge 24 high-quality and highly flexible single solid core tinned copper wire of different colours (Black, Red, Yellow, Green, Blue, and White), perfect for colour-coding your circuit wires.
This Plusivo Hook Up Wire Kit also includes a heat shrink tube kit, a mini wire stripper tool, and coloured cable ties. Wire Kit is in a durable colour-coded dispensing box that keeps the spools organized.
Specifications:
- Voltage Rating: 600V
- Core Type: Stranded
- Cable Length: 9M
Features:
- Soft and Flexible Silicone Insulation
- 200°C Temperature Rating
Package Included:
- 1 x Black Wire (30 ft)
- 1 x Yellow Wire (30 ft)
- 1 x Green Wire (30 ft)
- 1 x Blue Wire (30 ft)
- 1 x White Wire (30 ft)
- 1 x Heatshrink Tubes for each color
- 1 x Colored Wire Ties for each color
- 1 x Mini Wire Stripper Tool
SKU: n/a
