Drone Parts
Showing 553–576 of 1044 results
-
Flight Controller & Accessories
KK2.1.5 LCD Flight Controll Board for FPV Racing Drone | e | kk flight controller
-54%
Flight Controller & AccessoriesKK2.1.5 LCD Flight Controll Board for FPV Racing Drone | e | kk flight controller
The kk 2.1.5 flight controller is next big evolution of the first generation KK flight controller boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!The KK2.1.5 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.Description:
Item number: KK2.1.5Size: 51mm x 51mm x 12mmWeight: 21 gram (Inc Piezo buzzer)IC: AtmegaGyro/Acc: InvenSense Inc.Auto-level: YesInput Voltage: 4.8-6.0VAVR interface: standard 6 pinSignal from Receiver: 1520us (5 channels)Signal to ESC: 1520usSKU: n/a -
-
-
-
-
-
-
-
Drone Frame and Accessories, Drone Parts, Propellers
MADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India
-28%
Drone Frame and Accessories, Drone Parts, PropellersMADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India
1. 10-inch Diameter with 5 Pitch for optimal balance between thrust and efficiency
2. Tri-Blade Design for increased thrust, stability and rigidity
3. Made from Glass Fibre Reinforced Nylon for superior durability and performance
4. Lightweight Build – only 23 gm +- 5%, reduces load on motors
5. 18 mm Hub Diameter, 9 mm Hub Thickness and 5 mm Shaft CompatibilitySKU: n/a -
Drone Frame and Accessories, Drone Parts, Propellers
MADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India (Copy)
-28%Drone Frame and Accessories, Drone Parts, PropellersMADE IN INDIA 10X5X3(CCW-CW) Black-Glass Fiber Reinforced Nylon for FPV in India (Copy)
1. 10-inch Diameter with 5 Pitch for optimal balance between thrust and efficiency
2. Tri-Blade Design for increased thrust, stability and rigidity
3. Made from Glass Fibre Reinforced Nylon for superior durability and performance
4. Lightweight Build – only 23 gm +- 5%, reduces load on motors
5. 18 mm Hub Diameter, 9 mm Hub Thickness and 5 mm Shaft CompatibilitySKU: n/a -
Drone Accessories, Drone Kit, Drone Parts
Made in india AURAA Power Distribution Board 60
🔌 Plug-and-Play Quadcopter PDB – No Soldering Required!
🔧 Hassle-free setup with zero soldering – truly plug & play🔋 Supports up to 6S batteries – for high-performance quadcopters!
⚡ Flexible Power Options: 5V & 12V outputs + 4 adjustable ports (5V–24V)
🛠️ Manual Voltage Control: Tune each port manually to match your device requirements.
🎯 Precision Powering: Ideal for cameras, GPS, LEDs, and flight systems.
♻️ Fully Reusable Design – no waste, no hassle!
🛠️ Replace Only What’s Needed – no need to swap the entire board; just replace the faulty voltage output module.
🇮🇳 Proudly Made in India – designed, developed, and manufactured with excellence.
🚁 Perfect for Custom Drones, Educational Kits & Rapid Prototyping – built for creators, learners, and innovators
SKU: n/a -
Flight Controller & Accessories, Uncategorized
Made in India Daspilot flight controller
- Radio Input : PPM Signal
- 4 x Motor Out 1000-2000us 250hz Refresh Rate
- Dedicated Radio Calibration button
- Dedicated ESC Calibration Button
- Dedicated Accelerometer Calibration Button
- RGB LED Indicator
- Flight mode: self level
- Input Voltage: 5V (ch1)
- Max Roll Angle: 28 deg, Max Pitch Angle: 28 deg, Max Yaw Rate: 150 deg/s
- Weight : 25 grams
SKU: n/a -
Drone Motor
Made In India RD 5008 UAV BLDC Motor 6S 370KV
Specification:- Motor Type – Outrunner
- KV Rating – 370 KV
- Maximum Thrust – 4.2 KG
- Stator Poles / Magnet Poles – 24 / 28
- No load current – 1.5A
- Motor Efficiency – 90.99%
- Weight (Including Cable) – 1359 grams
- Voltage Range – 6S
- Maximum Current (15Sec) – 51A
- Maximum Power (15Sec) – 1224W
- Motor Dimensions – Ø55.6mm x 27mm
- Motor Torque Constant (9m.cm/A) – 294.15
- Cable Type / Length – 15AWG / 180mm
- Copper wire Temperature Rating – 90 ℃
- Winding material – 100% Copper
- IP Rating – IP34
- Maximum Operating Temperature – 150 ℃
- Recommended Propeller – 17*60 (Folding)
SKU: n/a -
Drone Kit, Drone Motor
Made In India RD MI X8 8015 UAV BLDC Motor 12S 125KV
Specification:- Motor Type – Outrunner
- KV Rating – 125 KV
- Maximum Thrust – 14 KG
- Stator Poles / Magnet Poles – 36 / 42
- No load current – 3.2A
- Motor Efficiency – 90.99%
- Weight (Including Cable) – 509 grams
- Voltage Range – 48 V (12S LIPO – 4.2V/ pc)
- Peak Current (30 Sec) – 90 A
- Peak Power (30 Sec) – 3996 W
- Motor Dimensions – Ø90mm x 33.25mm
- Cable length – 100 mm
- Shaft Diameter (Internal) – Ø6mm
- Magnet Temperature Rating – 150 ℃
- Cable Type / Length – 14AWG / 100mm
- Copper wire Temperature Rating – 150 ℃
- Winding material – 100% Copper
- IP Rating – IP34
- Maximum Operating Temperature – 60 ℃
- Recommended Propeller – 30*95 (Folding)
SKU: n/a -
Drone Parts, Drone Transmitter and Receiver
Made in india Remote Controller
-
Display7-inch LCD touch screen
-
Resolution1024 x 600
-
Memory8GB
-
Storage64GB – extendable
-
NetworkWLAN
-
External InterfaceUSB, LAN port, 3.5mm Audio jack
-
Serial InterfaceUSB x 2
-
Industrial Protection GradeIP4
-
Temperature-10°C – 55°C
-
N.W930 Grams
-
Battery Life3 Hours
-
Battery Capacity2000mAh(3 Cell)
-
AntennaDual Antenna 2.4Ghz
-
Working Frequency2.4GHZ
-
RF Power30dBM@CE/FCC
-
Remote Control Range15 KM
-
Channel16
-
ProcessorIntel N5105
-
Operating SystemAXLDOS secure O/S
-
ExtendabilityN+1 configuration and realtime broadcasting
SKU: n/a -
-
Flight Controller & Accessories
Made in india zerodrag warp f7 flight controller
Product Name: ZERODRAG WARP F7
• Power Input: 3-6S LiPo
• Mounting: 30.5 x 30.5mm (4mm hole size)
• Dimension: 37 x 38.5 x 7.1 mm
• Weight: 9.35g
• MCU: STM32F722
• GYRO (IMU): ICM42688P / MPU6000
• Barometer: BMP280 • OSD Chip: AT7456E
• USB Port: Type-C
• BlackBox-Flash: 32MB
• Camera Control: Pad • 5V Bec: 3 Amp
• 10V Bec: 2.5 Amp • 3.3V Regulator: 500 mA
• USB 4.5V: For Receiver and GPS module
• ESC Signal Pads: M1 – M6 on top side and M7-M8 as T6 & R6
• UARTs: 6 UARTs with 6 motor pads / 5 UARTs with 8 motor pads
SKU: n/a -
