Basic Electronic Components
Showing 793–816 of 919 results
-
Basic Electronic Components
TIP32C PNP Bipolar Power Transistor 100V 3A TO-220 Package (Pack of 5)
-39%
Basic Electronic ComponentsTIP32C PNP Bipolar Power Transistor 100V 3A TO-220 Package (Pack of 5)
TIP32C PNP Bipolar Power Transistor 100V 3A TO-220 Package (Pack of 5)
Meet the TIP32C PNP Bipolar Power Transistor, a reliable choice for power amplification and control in electronic circuits. Designed for optimal efficiency and performance, this transistor is suitable for a variety of applications, including low-distortion complementary designs and general-purpose amplification.
Features:
- Low Saturation Voltage: Ensures minimal power loss and efficient operation, ideal for high-performance applications.
- Simple Drive Requirements: With straightforward drive requirements, this transistor is easy to integrate into your circuit designs, saving you time and effort.
- High Safe Operating Area: Designed to withstand demanding operating conditions, ensuring reliability and longevity in your electronic systems.
- Complementary Designs: Suitable for use in low distortion complementary designs, allowing for versatile circuit configurations and applications.
- Easy Handling: Compact and lightweight, making it convenient to carry and handle during installation and assembly.
SKU: n/a -
Basic Electronic Components
TMC2208 Stepper Motor Driver Module
TMC2208 Stepper Motor Driver Module
The TMC2208 V1.2 is the latest version that uses the UART function directly and eliminates the need for extra wiring.
It has a flexible micro-Plyer interpolation unit that can provide up to 256 micro steps per step resolution. This allows for smooth sinusoidal control even in systems with limited pulse rates. As a stealth chip, it uses fine music technology that is widely used in 3D printing. Therefore, it is compatible with existing 3D printer electronics and does not require costly redesign. It has pulse/direction input and can operate independently. The configuration is done through a digital input.
SKU: n/a -
Basic Electronic Components
TNY280PN Power Integrations AC/DC Converter IC DIP-8 Package
The TNY280PN is a high-efficiency AC/DC Converter IC from Power Integrations, designed for compact and energy-efficient power supply solutions. It features Tiny Switch-III technology, integrating a high-voltage power MOSFET, oscillator, and control logic into a DIP-8 package, reducing component count and simplifying circuit design.
Features:
- Integrated High-Voltage Power MOSFET: Reduces external components and simplifies circuit design.
- Wide Input Voltage Range: Supports 85V to 265V AC, making it ideal for universal power applications.
- TinySwitch-III Technology: Enhances energy efficiency, reduces switching losses, and improves thermal performance.
- High Efficiency: Lowers power dissipation, minimizing heat generation.
- Ultra-Low Standby Power Consumption: Meets modern energy-saving standards with minimal power draw in standby mode.
SKU: n/a -
Basic Electronic Components
Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)
-57%
Basic Electronic ComponentsTower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)
Tower Pro MG996R Digital Metal Gear High Torque Servo Motor
The Tower Pro MG996R Digital Metal Gear High Torque Servo Motor offers impressive performance with its metal gears and high 10kg stalling torque in a compact design. This updated version of the popular MG995 servo features enhanced shock resistance, a redesigned PCB, and a new IC control system, improving precision and reliability. The motor and gears have also been optimized to reduce dead band width and improve centering accuracy.
This servo comes equipped with a 30cm wire and a 3-pin ‘S’ type female header connector, making it compatible with a wide range of receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum, and Hitec. It provides an excellent solution for projects requiring precise and high-torque motion control.
Wire Configuration of Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation): –
- RED – Positive
- Brown – Negative
- Orange – Signal (PWM)
SKU: n/a -
Basic Electronic Components
Towerpro MG90S Micro Digital Servo Motor (360° Continuous Rotation)
Towerpro MG90S Micro Digital Servo Motor (360° Continuous Rotation)
Presenting the Towerpro MG90S Micro Digital Servo Motor featuring 360° Continuous Rotation, an affordable and high-quality servo motor for diverse applications. Ideal for RC aircraft, automobiles, robotics, or any inventive project, these servo motors deliver dependable performance without breaking the bank.
Though not original TowerPro products, these motors have undergone extensive testing and are proven to be of commendable quality for their cost. They offer high resolution, precise positioning, swift control response, and consistent torque across the servo’s range of motion, guaranteeing superior performance for various uses.
Specifications include: Model: MG90S, Weight: 13g, Operating Voltage: 4.8V~6.6V, Servo Plug: JR, Stall Torque at 4.8V: 1.8kg-cm, Stall Torque at 6.6V: 2.2kg-cm.
Lightweight at only 13g and compatible with JR servo plugs, these motors are a breeze to incorporate into your projects. The Towerpro MG90S servo motors are an excellent choice for both hobbyists and professionals, offering robust performance and impressive holding power, a stellar addition to any toolkit.
SKU: n/a -
Basic Electronic Components
TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
-56%
Basic Electronic ComponentsTP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
The TP4056 1A Li-Ion Lithium Battery Charging Module with Micro B USB is a 3.7V lithium battery charger that features an onboard Micro USB interface. You can directly connect it to a computer’s USB port for battery charging. If a USB port is not available, you can use an external voltage source at the IN+/IN- pads, which is ideal for DIY projects. The module is compact and lightweight.
Additionally, the TP4056 module includes a current monitor, under-voltage lockout, automatic recharge, and two status pins to indicate charge termination and the presence of an input voltage.
SKU: n/a -
Basic Electronic Components
TPS5430DDAR original IC SO-PowerPad-8 Step-Down Converter IC
The TPS5430DDAR is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an Undervoltage lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents, and a voltage feedforward circuit to improve the transient response.
Using the ENA pin, the shutdown supply current is reduced to 18 μA typically. Other features include an active-high enable, overcurrent limiting, over-voltage protection, and thermal shutdown. To reduce design complexity and external component count, theTPS543x feedback loop is internally compensated. The TPS5431 is intended to operate from power rails up to 23 V. The TPS5430 regulates a wide variety of power sources including 24 V bus. The TPS543x device is available in a thermally enhanced, easy-to-use 8-pin SOIC PowerPAD package. TI provides evaluation modules and the
A designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
TQFP32/44/64/80/100 to DIP PCB Board Converter Adapter-1Pcs.
-31%
Basic Electronic Components, Electronic Components, PCB AdapterTQFP32/44/64/80/100 to DIP PCB Board Converter Adapter-1Pcs.
This is a Double-Side TQFP32/44/64/80/100 to DIP PCB Board Converter Adapter. A side for pin pitch size 0.8mm, it can be used for most of the QFP, TQFP, LQFP, FQFP (compatible with 32pin~64pin) to 2.54mm DIP. B side for pin pitch size 0.5mm, it can be used for most of the QFP, TQFP, LQFP, FQFP (compatible with 32pin~100pin) to 2.54mm DIP.
This TQFP32/44/64/80/100 to DIP PCB Board Converter Adapter also suitable for STC89C, ATmega, STM32F, MSP430 series of MCU or other compatibles.
Features:
- QFP/TQFP/LQFP/FQFP 32/44/64/80/100 pin switch over DIP double-sided pinboard
- Double-sided FR-4PCB, unique design makes the board compatible with more models of IC packages QFP
- A side of the patch 32 pin -100 pin turn DIP, 0.5mm spacing
- The other side is 32 pin -64 pin, pitch 0.8mm pitch.
- High-quality PCB FR4 Grade with FPT Certified.
Package Includes:
1 x TQFP32/44/64/80/100 to DIP PCB Board Converter Adapter-1Pcs.
SKU: n/a -
Basic Electronic Components
TTL FTDI Transmitter USB For 3.3V/5V Dual Power FT232RL MWC Programmer
-63%
Basic Electronic ComponentsTTL FTDI Transmitter USB For 3.3V/5V Dual Power FT232RL MWC Programmer
By using the TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multiview 2.5 is the same as the GPS in the APM pack and any other.
A device that has a TTL port provides the computer with a USB port. By connecting this converter to the computer and installing the driver program, which adds a virtual serial port to the computer ports, which is capable of working with Windows operating systems, MAC, Linux. On the output of this converter, in addition to the TXD, RXD and GND pins, the output voltage is also 5v and 3.3v.
A USB/TTL converter based on FT232RL high quality, high-performance USB-to-Serial Bridge Controller. The famous manufacturer of USB/TTL converter products produced this chip. The FTDI TTL USB is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices.
This TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RL FTDI MWC Programmer board decrease the cost of Arduino development and increases ease of use. The jumper on the back of the board allows the board’s power output and IO level to be configured to either 3.3V or 5V. You can cut the default 5V trace and add a solder jumper to switch to 3.3V.
SKU: n/a -
Basic Electronic Components
TUL PYNQ-Z2 1M1-M000127DEV FPGA Board
The TUL PYNQ-Z2 1M1-M000127DEV FPGA Board is a development platform designed primarily for embedded systems and digital design applications, particularly in educational and research settings. It is based on the Xilinx Zynq-7000 SoC (System on Chip), which combines a dual-core ARM Cortex-A9 processor with programmable logic, enabling seamless hardware-software integration. The board supports Python productivity through the PYNQ framework, allowing users to program the FPGA using Python instead of traditional hardware description languages.
Equipped with features like HDMI input/output, audio codec, Arduino and Raspberry Pi-compatible headers, and a variety of PMOD connectors, the PYNQ-Z2 is ideal for multimedia projects, computer vision, and IoT prototyping. Its affordability and open-source ecosystem make it a popular choice for students, hobbyists, and professionals alike.
SKU: n/a -
Basic Electronic Components
TXB0104D Voltage Level Translator Bidirectional, 0.02 mA ns 100 Mbps
-53%
Basic Electronic ComponentsTXB0104D Voltage Level Translator Bidirectional, 0.02 mA ns 100 Mbps
This TXB0104D 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5- V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA must not exceed VCCB. When the OE input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE must be tied to GND through a pulldown resistor The current sourcing capability of the driver determines the minimum value of the resistor. The TXB0104D device is designed so the OE input circuit is supplied by VCCA. This device is fully specified for partial power- down applications using I OFF. The I OFF circuitry disables the outputs, which prevents damaging current back-flow through the device when the device
is powered down.SKU: n/a -
Basic Electronic Components
Uno R3 Beginners Kit for Arduino Uno- SECONDRY KIT
The Uno R3 Beginners Kit for Arduino Uno, often referred to as the “Secondary Kit,” is a comprehensive collection designed for Arduino enthusiasts, hobbyists, and beginners eager to delve deeper into electronics and programming with the Arduino Uno board. This kit expands on the basic Arduino Uno starter kit, offering a wider variety of components and modules for more complex projects.
Key features and components typically included in the Uno R3 Secondary Kit are:
Arduino Uno R3 Board: At the heart of the kit is the Arduino Uno R3 board, a versatile microcontroller platform based on the ATmega328P chip. It features numerous GPIO pins, analog inputs, and digital interfaces for connecting a wide range of sensors, actuators, and peripherals.
Breadboard: The kit includes a solderless breadboard for easy and quick prototyping, allowing you to build circuits without the need for soldering.
SKU: n/a -
Basic Electronic Components
USB Blaster ALTERA CPLD/FPGA Programmer
SKU: 498537
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS and JTAG.
SKU: n/a -
Basic Electronic Components
USB Fast Charging Module
USB Fast Charging Module
This buck module is designed to charge phones through a USB port. It is compatible with Quick Charge 3.0 and can handle input voltages from 12V to 24VDC. The module utilizes the IC IP6505, a step-down converter that includes an integrated synchronous switch.
Application:
- Car Charger
- Fast Charger Adaptor
- Intelligent Power Strip
Features:
- Supports multiple fast charging protocols.
- Input over-voltage, over current, under-voltage protection.
- Output overcurrent, short circuit protection
- Module over-temperature protection.
- Long lifespan.
SKU: n/a -
Basic Electronic Components
USB LED Book Lights
Buy the new USB LED Book Light. It is Lightweight, compact and makes it easy to carry and handle. It is best Suitable for notebook computers, desktops, computers, mobile power supplies, etc. It’s small in size and is very easy to install.
Features:
- Lightweight and compact making it easy to carry and handle.
- Light Source: LED Bulbs, Portable and easy to carry
- Suitable for notebook computers, desktops, computers, mobile power supplies, etc.
- Mini size, taking little room, easy to install, convenient to use.
- Portable and easy to carry.
- Adopting high technology, show excellent performance.
- Current: 500mah LED quantity
SKU: n/a -
-
Basic Electronic Components
V5 V6 Nozzle 1.75+0.6 for 3D printer
The nozzle is the component of a 3D printer that deposits the molten filament into the build area. There are many different types of 3D printer nozzles available and leveraging their different strengths is important. Standard brass nozzles are great for general-purpose 3D printing but abrasive filament like NylonX requires a high-performance nozzle. Copper-plated and Clean Tip specialty nozzles are built to stay clean and not let filament stick to them.
0.6 mm 3D Printer Extruder Brass Nozzle which has outstanding quality and the best performance for DIY and professional systems. By simply adding a holder, you can assemble your own dual-head extrusion.
Features:
- Light Weight
- high-quality Brass
- Small in size
- Easy to install.
- Easy to use.
SKU: n/a -
Basic Electronic Components
V5 V6 Nozzle 1.75+0.8 for 3D Printer
PRODUCT DESCRIPTION
V5 V6 Nozzle 1.75 0.8 for 3D Printer
A 3D printer nozzle is the part that lays down the melted filament on the build area. You can choose from various kinds of 3D printer nozzles, depending on your needs. Brass nozzles are good for general 3D printing, but you need a high-performance nozzle for abrasive filaments like NylonX. Copper-plated and CleanTip nozzles are designed to prevent filament from sticking to them.
0.6 mm 3D Printer Extruder Brass Nozzle is a high-quality and reliable nozzle for DIY and professional systems. You can make your own dual-head extrusion by adding a holder.
Features:
- Light Weight
- high-quality Brass
- Small in size
- Easy to install.
- Easy to use.
SKU: n/a -
Basic Electronic Components
V6 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament
V6 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament. This heat break is compatible with E3D v6 1.75mm hot ends.
This tube is made of stainless steel and coated with TwinClad XT, a low-friction Electroless Nickel composite coating. TwinClad XT is often used in injection molding for its release properties. This coating reduces clogging in the hotend zone where the filament melts. It is also hard and resistant to corrosion. It works well with abrasive filaments like Carbon Fiber, Metal-filled, Aluminates, etc.
This part replaces the PTFE liner and provides reliable and long-lasting performance with PLA.
SKU: n/a -
Basic Electronic Components
V6 Volcano Brass Length Extruder Nozzle – 1.75mm x 0.60mm
V6 Volcano Brass Length Extruder Nozzle – 1.75mm x 0.60mm
V6 Brass Volcano Nozzles are high-performance nozzles made of brass for your Volcano Hot End. They allow you to print with a wide range of layer heights, from super-fine to super-fat, and achieve stronger, faster and bigger prints with the Volcano Hot End Powerup! These nozzles work seamlessly with the LulzBot Moars ruder, and can also upgrade many RepRap 3D printers, such as the Prusa i3, with a Volcano.
Volcano nozzles enable super-fast printing with the Volcano block and packs, as they have extra-long melt zones that heat up the filament at very high speeds.
Note: It only matches to V6 type Extruder
Specifications and Features:
- Input: 1.75mm
- output: 0.60mm
- Weight: 3g
- Material: Brass Alloy
- Compatible with V6
SKU: n/a
