Basic Electronic Components
Showing 121–144 of 919 results
-
Basic Electronic Components, Capacitor, Electronic Components
2.2uF 450V Electrolytic Capacitor – -(pack of 5)
-17%
Basic Electronic Components, Capacitor, Electronic Components2.2uF 450V Electrolytic Capacitor – -(pack of 5)
An aluminum electrolytic capacitor, often only called an electrolytic capacitor, uses aluminum metal as one electrode, covered with a very thin layer of aluminum oxide as dielectric, and which has an electrolyte as its second electrode.
Aluminum electrolytic capacitors are typically used in power supplies and DC-DC converters for smoothing and buffering rectified DC voltages in many electronic devices. They are also used in industrial power supplies. Aluminum electrolytic capacitors are polarized capacitors because of their anodization principle. They can only be operated with DC voltage applied with the correct polarity.
Typical applications of aluminum electrolytic capacitors with non-solid electrolytes are
- Input and output decoupling capacitors for smoothing and filtering.
- DC-link capacitors in AC/AC converters for variable-frequency drive and frequency
changers - Correction capacitors for power factor correction
SKU: n/a -
Basic Electronic Components
2.54mm Single Row Male 1X40 Pin Header Strip black (Pack of 10)
It is a 2.54mm 1×40 Pin Male Single Row Straight Long Header Strip. It has one row of 40 pins. Ideal for through-hole mounting. It has 20mm long pins and the plastic spacer can be adjusted according to the application.
Specification:
SKU: n/a -
Basic Electronic Components, Electronic Components
2000W 220V SCR Voltage Regulator Dimmers Speed Controller Thermostat
-63%
Basic Electronic Components, Electronic Components2000W 220V SCR Voltage Regulator Dimmers Speed Controller Thermostat
2000W 220V SCR Voltage Regulator Dimmers Speed Controller Thermostat is a speed controller used to control AC supply and suitable for electric furnace, water heater, lamps, small motor, electric iron. etc. You can play a brightness adjustment, speed, pressure, temperature control effect, very convenient to use.
Specification:
- Input voltage: 90-220V AC
- Maximum power: 2000W2000W 220V SCR Voltage Regulator Dimmers Speed Controller Thermostat is a speed controller used to control AC supply and suitable for electric furnace, water heater, lamps, small motor, electric iron. etc. You can play a brightness adjustment, speed, pressure, temperature control effect, very convenient to use.
Specification:
- Input voltage: 90-220V AC
- Maximum power: 2000W
- Adjustable voltage: 50-220V AC
- Material: plastic, metal
- The chip is 25A. If you use this for voltage adjustment, 1000W, under 5A is nice. If you use this for an electrical machine, under 3A is nice.
- Size: 4.8cm x 5.5cm x 2.7cm.
- Weight:41 g
- Adjustable voltage: 50-220V AC
- Material: plastic, metal
- The chip is 25A. If you use this for voltage adjustment, 1000W, under 5A is nice. If you use this for an electrical machine, under 3A is nice.
- Size: 4.8cm x 5.5cm x 2.7cm.
- Weight:41 g
SKU: n/a -
Basic Electronic Components
200mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
-57%
Basic Electronic Components200mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
200mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
This product is a 200mm trapezoidal lead screw with a copper nut and four threads. It has a 2mm pitch and an 8mm thread diameter. It is suitable for general machine tools, such as 3D printers.
This lead screw is durable, accurate, and resistant to rust. It has low friction and long service life. It is a new type of screw that can be used with stepper motors, machine tool rails, and other equipment.
To know more about the pitch, please refer to the schematic below.
Features :
- 4 Start Lead Screw
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
- Fine producing and practical.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor
20mm GL20528 Light Sensitive Photoresistor LDR
-22%
Basic Electronic Components, Electronic Components, Resistor20mm GL20528 Light Sensitive Photoresistor LDR
The resistance of 20mm GL20528 Light Sensitive Photoresistor LDR changes with the change in the ambient light exposed on the surface of the sensor. As the light on the sensor increases then the resistance across the two leads decreases. Light Dependent Resistor is a type of photocell which finds excellent use in light sensing device application, whether it is automatic outdoor light ON/OFF switch or indoor automatic light switch; moreover, the 12mm LDR or photoresistor sensor works best in both light and dark regions. The photo-resistor is a staple of electronics. If you need a way to sense the level of ambient light, then there is no easier way to do it without an LDR/photo-resistor.
Two Cadmium Sulphide PhotoConductive Cells with spectral responses similar to that of the human eye. Cell resistance falls with increasing light intensity. Applications of this product include smoke detection, automatic lighting control, batch counting, and burglar alarm systems. Furthermore, some of the applications are given below.
Analog Applications:
- Camera exposure control
- Auto slide focus – dual cell
- Photocopy machines – the density of the toner
- Colorimetric test equipment
- Densitometer
- Electronics scales – dual cell
- Automatic gain control – modulated light source
- Automated rear view mirror
Digital Applications:
- Automatic headlight dimmer
- Nightlight control
- Oil burner flame out
- Streetlight control
- Absence/presence (beam breaker)
- Position sensor
Other applications:
- Annunciator
- Camera automatic photometry
- Electronic toy
- Industrial control
- Light control
- Light control lamp
- Photoelectric control
- Switch
To know more about photo-resistor, click here. What is photo-resistor?
Features:
- Coated with epoxy
- Good reliability
- High sensitivity
- Small volume
- Fast response
- Good spectrum characteristic
- Model: GL20528 ( GM20528 )
- Size: 20mm
- Max. voltage: 500 VDC
- Max. power: 500 mW
- Spectrum Peak Value (nm): 560
- Light resistance ( KΩ) : 10–20 kΩ
- Dark resistance ( KΩ): 2 kΩ.
- Υ value : 0.6.
- Increase response time: 30 mS.
- Decrease response time: 30 mS.
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100HT-101-V-RC 2111 High Current Toroid Inductors
-20%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2100HT-101-V-RC 2111 High Current Toroid Inductors
2100HT-101-V-RC 2111 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Applications:
- Tuning circuits.
- Sensors.
- Store energy in a device.
- Induction motors.
- Transformers.
- Filters.
- Chokes.
- Ferrite beads
Note: Actual product can vary from the shown image
Features:
- High-temperature rating up to +200 °C
- Low magnetic radiation
- High current capacity
- Horizontal or vertical mount available
- Low cost
- Operating temperature: -55 to +200 °C
Packages Includes:
1 x 2100HT-101-V-RC 2111 High Current Toroid Inductors
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100HT-101H-RC 2011 High Temperature, High Current Toroid Inductors
-20%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2100HT-101H-RC 2011 High Temperature, High Current Toroid Inductors
2100HT-101H-RC 2011 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- High-temperature rating up to +200 °C
- Low magnetic radiation
- High current capacity
- Horizontal or vertical mount available
- Low cost
- Operating temperature: -55 to +200 °C
Packages Includes:
1 x High Current Toroid Inductors
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100HT-102V-H-RC 2045 High Current Toroid Inductors
-17%Basic Electronic Components, Electronic Components, Wire Wound Inductors2100HT-102V-H-RC 2045 High Current Toroid Inductors
2100HT-102V-H-RC 2045 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Applications:
- Tuning circuits.
- Sensors.
- Store energy in a device.
- Induction motors.
- Transformers.
- Filters.
- Chokes.
- Ferrite beads
Note: Actual product can vary from the shown image
Features:
- High-temperature rating up to +200 °C
- Low magnetic radiation
- High current capacity
- Horizontal or vertical mount available
- Low cost
- Operating temperature: -55 to +200 °C
Packages Includes:
1 x 2100HT-102V-H-RC 2045 High Current Toroid Inductors
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100HT-221V-RC 2138 High Current Toroid Inductors
-14%Basic Electronic Components, Electronic Components, Wire Wound Inductors2100HT-221V-RC 2138 High Current Toroid Inductors
2100HT-221V-RC 2138 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Applications:
- Tuning circuits.
- Sensors.
- Store energy in a device.
- Induction motors.
- Transformers.
- Filters.
- Chokes.
- Ferrite beads
Note: Actual product can vary from the shown image
Features:
- High-temperature rating up to +200 °C
- Low magnetic radiation
- High current capacity
- Horizontal or vertical mount available
- Low cost
- Operating temperature: -55 to +200 °C
Packages Includes:
1 x 2100HT-221V-RC 2138 High Current Toroid Inductors
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100LL-101-H-RC Low Core Loss, High Current Toroid Inductors
-5%Basic Electronic Components, Electronic Components, Wire Wound Inductors2100LL-101-H-RC Low Core Loss, High Current Toroid Inductors
2100LL-101-H-RC High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
Packages Includes:
1 x Low Core Loss, High Current Toroid Inductors
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100LL-151-H-RC toroid coil inductor
-8%Basic Electronic Components, Electronic Components, Wire Wound Inductors2100LL-151-H-RC toroid coil inductor
The KEMET PHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Ni dust cores and are useful in various
fields such as DC/DC converters and differential noise countermeasures.A toroid is a coil of insulated or enameled wire wound on a donut-shaped form made of powdered iron. A toroid is used as an inductor in electronic circuits, especially at low frequencies where comparatively large inductances are necessary
A toroid works as an inductor, which boosts the frequency to appropriate levels. Inductors are electronic components that are passive so that they can store energy in the form of magnetic fields. A toroid turns, and those turns induce a higher frequency. Toroids are more economical and efficient than solenoids.
Applications:
- Switching power supply outlet
- DC-DC converter
- Phase compensation
- Boost converter
- Normal mode noise solution countermeasure
Features:
- Fe-Ni dust core material
- Most suitable for big current applications
- Low core loss
- High saturation magnetic flux density
- Good DC superposition characteristics
- Wide variety of sizes and specifications
Packags Includes:
1 x 2100LL-151-H-RC toroid coil inductor PHBC Series (Fe-Ni)
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100LL-390H-RC toroid coil inductor
-8%Basic Electronic Components, Electronic Components, Wire Wound Inductors2100LL-390H-RC toroid coil inductor
The KEMET PHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Ni dust cores and are useful in various
fields such as DC/DC converters and differential noise countermeasures.A toroid is a coil of insulated or enameled wire wound on a donut-shaped form made of powdered iron. A toroid is used as an inductor in electronic circuits, especially at low frequencies where comparatively large inductances are necessary
A toroid works as an inductor, which boosts the frequency to appropriate levels. Inductors are electronic components that are passive so that they can store energy in the form of magnetic fields. A toroid turns, and those turns induce a higher frequency. Toroids are more economical and efficient than solenoids.
Applications:
- Switching power supply outlet
- DC-DC converter
- Phase compensation
- Boost converter
- Normal mode noise solution countermeasure
Features:
- Fe-Ni dust core material
- Most suitable for big current applications
- Low core loss
- High saturation magnetic flux density
- Good DC superposition characteristics
- Wide variety of sizes and specifications
Packags Includes:
1 x 2100LL-390H-RC toroid coil inductor PHBC Series (Fe-Ni)
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100LL-470-H-RC Toroidal Inductor
-8%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2100LL-470-H-RC Toroidal Inductor
2100LL-470-H-RC
Toroidal Inductor 2100LL, 47 µH, 5.2 A, 0.024 ohms, ± 15%
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
Package Includes:
1 x 2100LL-470-H-RC Toroidal Inductor
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2100LL-471-H-RC toroid coil inductor
-8%Basic Electronic Components, Electronic Components, Wire Wound Inductors2100LL-471-H-RC toroid coil inductor
The KEMET PHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Ni dust cores and are useful in various
fields such as DC/DC converters and differential noise countermeasures.A toroid is a coil of insulated or enameled wire wound on a donut-shaped form made of powdered iron. A toroid is used as an inductor in electronic circuits, especially at low frequencies where comparatively large inductances are necessary
A toroid works as an inductor, which boosts the frequency to appropriate levels. Inductors are electronic components that are passive so that they can store energy in the form of magnetic fields. A toroid turns, and those turns induce a higher frequency. Toroids are more economical and efficient than solenoids.
Applications:
- Switching power supply outlet
- DC-DC converter
- Phase compensation
- Boost converter
- Normal mode noise solution countermeasure
Features:
- Fe-Ni dust core material
- Most suitable for big current applications
- Low core loss
- High saturation magnetic flux density
- Good DC superposition characteristics
- Wide variety of sizes and specifications
Packags Includes:
1 x 2100LL-471-H-RC toroid coil inductor PHBC Series (Fe-Ni)
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2101-H-RC 2205 High Current Toroid Inductors
-19%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2101-H-RC 2205 High Current Toroid Inductors
2101-H-RC 2205 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
High CurrentToroid Inductors 2100 Series Table
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
Packages Includes:
1 x 2101-H-RC 2205 High Current Toroid Inductors
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2101-V-RC 2206 High Current Toroid Inductors
-11%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2101-V-RC 2206 High Current Toroid Inductors
2101-V-RC 2206 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Applications:
- Tuning circuits.
- Sensors.
- Store energy in a device.
- Induction motors.
- Transformers.
- Filters.
- Chokes.
- Ferrite beads
Note: Actual product can vary from the shown image
Features:
- High-temperature rating up to +200 °C
- Low magnetic radiation
- High current capacity
- Horizontal or vertical mount available
- Low cost
- Operating temperature: -55 to +200 °C
Packages Includes:
1 x 2101-V-RC 2206 High Current Toroid Inductors
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2105-V-RC 2146 High Current Toroid Inductors
-17%Basic Electronic Components, Electronic Components, Wire Wound Inductors2105-V-RC 2146 High Current Toroid Inductors
2105-V-RC 2146 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
High CurrentToroid Inductors 2100 Series Table
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
Packages Includes:
1 x 2105-V-RC 2146 High Current Toroid Inductors
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2107-H-RC 2117 High Current Toroid Inductors
-25%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2107-H-RC 2117 High Current Toroid Inductors
2107-H-RC 2117 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2109-V-RC 1742 High Current Toroid Inductors
-20%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2109-V-RC 1742 High Current Toroid Inductors
2109-V-RC 1742 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2109-V-RC 2037 High Current Toroid Inductors
-21%Basic Electronic Components, Electronic Components, Wire Wound Inductors2109-V-RC 2037 High Current Toroid Inductors
2109-V-RC 2037 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2114-V-RC 2149 High Current Toroid Inductors
-22%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2114-V-RC 2149 High Current Toroid Inductors
2114-V-RC 2149 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Applications:
- Tuning circuits.
- Sensors.
- Store energy in a device.
- Induction motors.
- Transformers.
- Filters.
- Chokes.
- Ferrite beads
Note: Actual product can vary from the shown image
Features:
- High-temperature rating up to +200 °C
- Low magnetic radiation
- High current capacity
- Horizontal or vertical mount available
- Low cost
- Operating temperature: -55 to +200 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2115-H-RC 1704 High Current Toroid Inductor
-25%Basic Electronic Components, Electronic Components, Wire Wound Inductors2115-H-RC 1704 High Current Toroid Inductor
2115-H-RC 1704 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a
