Basic Electronic Components
Showing 169–192 of 295 results
-
Basic Electronic Components
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
Introducing our 6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle, a vital component for precise timer control in home automation and various applications. This module includes a digital LED display for straightforward monitoring and timing adjustments.
Operating smoothly within a voltage range of 6-30V, it also supports a micro USB 5.0V power supply for added convenience. With its impressive output capability, this relay can control devices up to DC 30V 5A or AC 220V 5A, making it versatile for a wide array of tasks.
SKU: n/a -
Basic Electronic Components
7 x 5cm PCB Prototyping Printed Circuit Board Prototype Breadboard
Description:
Material: Bakelite
Color: Like the picture show
Quantity: 1 pc
Each measures 5 x 7cm with 2520 through holes (0.1 inch industrial standard spacing) for mounting components
Referencing numbers printed on both sides for easy reference of individual holesSpecification:
Dimension: 5 x 7cm
Thickness: 1.5mm
Hole pitch: 2.54mm
Hole inner diameter: 1.0mmPackage included:
1 x 12 x 18cm PCB prototyping printed circuit experimental board
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
7447060 toroid coil inductor
-23%
Basic Electronic Components, Electronic Components, Wire Wound Inductors7447060 toroid coil inductor
The KEMET PHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Ni dust cores and are useful in various
fields such as DC/DC converters and differential noise countermeasures.A toroid is a coil of insulated or enameled wire wound on a donut-shaped form made of powdered iron. A toroid is used as an inductor in electronic circuits, especially at low frequencies where comparatively large inductances are necessary
A toroid works as an inductor, which boosts the frequency to appropriate levels. Inductors are electronic components that are passive so that they can store energy in the form of magnetic fields. A toroid turns, and those turns induce a higher frequency. Toroids are more economical and efficient than solenoids.
Applications:Â
- Switching power supply outlet
- DC-DC converter
- Phase compensation
- Boost converter
- Normal mode noise solution countermeasure
Features:Â
- Fe-Ni dust core material
- Most suitable for big current applications
- Low core loss
- High saturation magnetic flux density
- Good DC superposition characteristics
- Wide variety of sizes and specifications
SKU: n/a -
Basic Electronic Components
7x9cm Prototyping PCB printed circuit experimental board
This is a Universal PCB Prototype Board single-Side 7 X 9 CM High-quality universal prototyping board with standard 0.1″ spacing through holes.
Specification:
Material: Bakelite
Dimension: 7 x 9cm
Thickness: 1.5mm
Hole pitch: 2.54mm
Hole inner diameter: 1.0mmPackage included:
1 XÂ 7x9cm Prototyping PCB printed circuit experimental boardSKU: n/a -
Basic Electronic Components
9 x 15cm PCB Prototyping Printed Circuit Board Breadboard
Specification:
Material: Bakelite
Dimension: 9 x 15cm
Thickness: 1.5mm
Hole pitch: 2.54mm
Hole inner diameter: 1.0mmNote:
Each measures 9 x 15cm with 1440 through holes (0.1 inch industrial standard spacing) for mounting components
Referencing numbers printed on both sides for easy reference of individual holesPackage included:
1 X 9x15cm Prototyping PCB printed circuit experimental board
SKU: n/a -
Basic Electronic Components
A86 JSN-SR04T Waterproof Ultrasonic Rangefinder Module Version 3.0
3mm Clear Yellow DIP LED
A yellow light-emitting diode (LED) is a semiconductor light source commonly used as an indicator in various devices, with increasing applications in general lighting. These LEDs appear transparent and emit a bright yellow light.
Engineered for applications that require high brightness, this LED series is available in different colors and intensities to meet a wide range of needs.
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
AIAC-1512C-12N5J-T Wire Wound Inductor
-25%
Basic Electronic Components, Electronic Components, Wire Wound InductorsAIAC-1512C-12N5J-T Wire Wound Inductor
AIAC-1512C-12N5J-T Wire Wound Inductor
Note:
- Product Images are shown for illustrative purposes only and may differ from the actual product.
- For Technical Specifications about the IC go through the Datasheet in the Attachment section.
SKU: n/a -
Basic Electronic Components
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino
-58%
Basic Electronic ComponentsAPDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino
The APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino is a compact and powerful board featuring the APDS-9960 sensor. This versatile sensor can measure ambient light and color, detect proximity, and recognize touchless gestures, enabling effortless control of computers, microcontrollers, robots, and more with simple hand motions. It’s the same sensor used in the Samsung Galaxy S5, making it one of the most affordable and accessible gesture sensors available.
The APDS9960 is a high-performance device, equipped with UV and IR blocking filters, four diodes sensitive to multiple directions, and an I2C-compatible interface for easy integration into your projects.
SKU: n/a -
Basic Electronic Components
Arduino Mega 2560 R3 Board
Arduino Mega 2560 R3 Board
The Arduino Mega 2560 R3 is a celebrated open-source microcontroller board, valued for its precision and versatility. Building on the Arduino Mega’s legacy, it employs the ATmega2560 SMD chip. Enhancements include SDA and SCL pins next to the AREF pin and two additional pins by the RESET pin. The IOREF pin allows shields to match the board’s voltage, and another reserved pin is provided for future upgrades.
With 54 digital input/output pins (15 supporting PWM output), 16 analog inputs, and 4 UARTs (hardware serial ports), the Mega 2560 R3 boasts a wide array of connectivity options. It also features a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button, offering full support for the microcontroller.
SKU: n/a -
Basic Electronic Components, Development Boards, DIY Learning and Robot Kits
Arduino Uno R3 CH340G version compatible Arduino Development Board
-30%
Basic Electronic Components, Development Boards, DIY Learning and Robot KitsArduino Uno R3 CH340G version compatible Arduino Development Board
This is the Arduino Ch340G version which uses CH340 Chip instead of Atmega16U2. This is an economical version with a price lower than that of the Arduino Uno R3 Board with Atmega 16U2.
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
ATCA-01-101M-V Toroidal Inductor
-19%
Basic Electronic Components, Electronic Components, Wire Wound InductorsATCA-01-101M-V Toroidal Inductor
Toroidal Inductor, Low EMI, ATCA, 100 µH, 2 A, 0.081 ohm, ± 20%
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
SKU: n/a -
Basic Electronic Components
ATMEGA8515-16PU MICROCHIP
The ATMEGA8515 is a high-performance, low-power microcontroller based on the Atmel 8-bit AVR RISC architecture. It features 8KB of programmable flash memory, 544B of internal SRAM, and supports up to 64KB of external SRAM, along with 512B of EEPROM. Operating within a voltage range of 2.7 to 5.5 volts, it delivers a throughput of 16 MIPS at 16MHz.
With its single-cycle instruction execution, the ATMEGA8515 achieves a throughput of nearly 1 MIPS per MHz, offering an optimal balance of processing power and energy efficiency.
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
B82442T1105K000 Wire wound Inductor
-12%
Basic Electronic Components, Electronic Components, Wire Wound InductorsB82442T1105K000 Wire wound Inductor
B82442T1105K000
Wirewound Inductor, AEC-Q200, 1 mH, 9.5 ohm, 1.8 MHz, 150 mA, 2220 [5650 Metric], B82442T
Specifications:
- Inductance: 1mH
- DC Resistance Max: 9.5ohm
- Self Resonant Frequency: 1.8MHz
- DC Current Rating: 150mA
- Inductor Case / Package: 2220 [5650 Metric]
- Inductor Case Style: 2220 [5650 Metric]
- Product Range: B82442T
- Inductance Tolerance: ± 10%
- Inductor Construction: Unshielded
- Core Material:Â Ferrite
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
SKU: n/a -
-
Basic Electronic Components
Blog Mechanical Bearings Search SC10UU 10mm Linear Ball Bearing Slider
-63%
Basic Electronic ComponentsBlog Mechanical Bearings Search SC10UU 10mm Linear Ball Bearing Slider
SC10UU Linear Bearing slider has a 10mm shaft diameter and comes with a metal housing. It is used on hardened steel shafts. Linear bearing is great for 3D printers small routers, CNC, and robotics.
Features:
- Model: SC10UU
- Economical, easy to maintain and replace.
- It provides smooth moving, low friction, high rigidity, and long life.
Applications:
- It is widely used in construction machinery, CNC 3D Printers, automotive components, home appliances, industrial, low noise, and high-speed electric motors, pumps, and machinery.
Package Includes:
1 x SC10UU 10mm Linear Ball Bearing Slider.
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
BRC2012T2R2MD wire wound Inductor
-25%Basic Electronic Components, Electronic Components, Wire Wound InductorsBRC2012T2R2MD wire wound Inductor
BRC2012T2R2MD
INDUCTOR, 2.2UH, 1A, 20%, 350MHZ
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
SKU: n/a -
Basic Electronic Components, Electronic Components
BREADBOARD GL-12 840 TIE POINTS SOLDERLESS DIY PROJECT CIRCUIT
-34%
Basic Electronic Components, Electronic ComponentsBREADBOARD GL-12 840 TIE POINTS SOLDERLESS DIY PROJECT CIRCUIT
Description:
- Tie-point 840
- Solderless breadboard (GL-12)
- Wire size: Suitable for 29-20 AWG wires
- Size: About 16.5*5.6*1cm
Package Includes:
1 XÂ GL-12 Breadboard 830 Point Solderless PCB
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
BRL3225T2R2M wire wound Inductor
-25%
Basic Electronic Components, Electronic Components, Wire Wound InductorsBRL3225T2R2M wire wound Inductor
BRL3225T2R2M
WW INDUCTOR, 2.2UH 1.85A 20% 150MHZ
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
SKU: n/a
