Basic Electronic Components
Showing 193–216 of 295 results
-
Basic Electronic Components
Cell Holder 32650 1X2 (Pack of 2)
Cell Holder 32650 1X2
This holder is designed to store two 32650 cells in a single row. Made from durable, flame-retardant ABS+PC materials, it offers excellent resistance to high temperatures and cracking.
The holder features edge slots, allowing you to easily combine multiple units and create custom battery packs in various sizes and configurations.
Please note, the 32650 cells are sold separately but are fully compatible with this holder.
Note!! Every Single battery cell needs 2 Spacer for one up and one down buy it accordingly.
Features:
There are slots on the edge of the holder to combine them into many different sizes and shapes of the battery pack.
Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
CM453232-4R7KL wire wound Inductor
-25%
Basic Electronic Components, Electronic Components, Wire Wound InductorsCM453232-4R7KL wire wound Inductor
CM453232-4R7KL
Wirewound Inductor, 4.7 µH, 1 ohm, 35 MHz, 315 mA, 1812 [4532 Metric], CM453232
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
SKU: n/a -
Basic Electronic Components
CNHL 8000mAh 11.1V 3S 30C Lipo Battery with XT90 Plug
The CNHL 8000mAh 11.1V 3S 30C LiPo battery with XT90 plug is a high-capacity battery suitable for a wide range of RC applications, particularly those requiring extended flight or operation times. Here are its specifications:
- Capacity: 8000mAh (milliampere-hour) indicates the amount of charge the battery can hold. With its high capacity, this battery is well-suited for powering large drones, RC airplanes, boats, and other hobby-grade vehicles that require long run times.
- Voltage: 11.1V (volts) refers to the nominal voltage of the battery. This is a 3-cell battery pack, with each cell having a nominal voltage of 3.7V. When combined in series, they sum up to 11.1V.
- Discharge Rate (C-Rating): 30C indicates the discharge rate of the battery. The “C” rating represents the maximum continuous discharge rate relative to the capacity of the battery. In this case, it can provide a continuous discharge rate of up to 30 times its capacity (8000mAh), which is 240A (amps). While not as high as some other batteries, this C-rating is still sufficient for many applications, especially those that prioritize capacity over instantaneous power delivery.
- Plug Type: XT90 plug is a common and reliable connector used in RC applications. It’s known for its ability to handle high currents without overheating and is widely compatible with various RC models and accessories.
SKU: n/a -
Basic Electronic Components
CNHL Black Series 5000mAh 11.1V 3S 40C Lipo Battery with XT60 Plug
The CNHL Black Series 5000mAh 11.1V 3S 40C LiPo battery with XT60 plug is a popular choice among RC enthusiasts, particularly for use in drones, RC cars, boats, and other hobby-grade vehicles. Here’s some information about this battery:
- Capacity: 5000mAh (milliampere-hour) indicates the amount of charge the battery can hold. In practical terms, this means it can deliver a higher amount of current over a longer period compared to lower-capacity batteries.
- Voltage: 11.1V (volts) refers to the nominal voltage of the battery. This is a 3-cell battery pack, with each cell having a nominal voltage of 3.7V. When combined in series, they sum up to 11.1V.
- Discharge Rate (C-Rating): 40C indicates the discharge rate of the battery. The “C” rating is a measure of how much current the battery can deliver in relation to its capacity. In this case, it can provide a continuous discharge rate of up to 40 times its capacity (5000mAh), which is 200A (amps).
- Plug Type: XT60 plug is a common type of connector used in RC applications. It’s known for its reliability and ability to handle high currents without overheating.
SKU: n/a -
-
Basic Electronic Components
DC – DC 6-24V to 5V USB Output Step Down Power Charger with Adjustable Buck Converter
-58%
Basic Electronic ComponentsDC – DC 6-24V to 5V USB Output Step Down Power Charger with Adjustable Buck Converter
DC – DC 6-24V to 5V USB Output Step Down Power Charger with Adjustable Buck Converter
This USB Output Step Down Power Charger accommodates a 6-24V voltage input and delivers a 5V 3A output, complete with input polarity reverse protection, output overvoltage protection, and short circuit protection.
Utilizing synchronous rectification technology, it achieves an ultra-high power conversion efficiency of up to 97.5%, maximizing the use of the input power. The onboard female type A USB port, equipped with an identification circuit, is ideally suited for iPhones, iPads, and Android smartphones. It is also capable of powering or recharging any electronic device that requires a 5V input power at currents up to 3A.
SKU: n/a -
Basic Electronic Components
DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
-59%
Basic Electronic ComponentsDC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
The DC 12V Switch Delay Relay Module features an adjustable delay time of 0 to 25 seconds and is based on the NE555 Timer IC, designed for high-performance timing applications. It includes a power indicator LED and timing indication LEDs for clear visual feedback.
This versatile module is suitable for various applications, including vehicle equipment, where it can delay ignition to prevent high surge currents that may damage components.
Operating as a monostable generator, the NE555 integrated circuit allows for adjustable delay times from 0 to 10 seconds, which can be configured using a potentiometer or by changing the capacitor values. It can control devices up to 220V and 10A.
The NE555 is renowned for its stability in generating accurate time delays and oscillations. It provides terminals for triggering or resetting as needed. In delay mode, timing is precisely managed by an external resistor and capacitor. For stable oscillation, the free-running frequency and duty cycle are controlled by two external resistors and one capacitor. The circuit can be triggered and reset with falling waveforms, and the output can source or sink up to 200mA, making it compatible with TTL circuits.
SKU: n/a -
Basic Electronic Components
Desoldering Wick
Solder wick is composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process.We tried a lot of cheaper solder wick before finding this supplier. This is a cheaper version of the wick we use. We may start using it actually. It works great and the price is awesome.Features:
- Material: 100% Copper
- Useful for Faster and Cleaner electronics Desoldering work
- Thickness: Comfortable for Desoldering
- RMA Coated Wick
- length : 1feet
Package Includes:1 x Desoldering WickSKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012F-1R0M=P2 Wire Wound Inductors
-33%
Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012F-1R0M=P2 Wire Wound Inductors
DFE252012F-1R0M=P2 Wire Wound Inductors
Features:
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012PD-1R0M P2 Wire Wound Inductors
-33%Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012PD-1R0M P2 Wire Wound Inductors
Wirewound Inductor, 1 µH, 0.042 ohm, 3.2 A, DFE252012P_D
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012PD-R47M P2 Wire Wound Inductors
-33%Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012PD-R47M P2 Wire Wound Inductors
DFE252012PD-R47M P2 Wire Wound Inductors 470 nH, 0.027 ohm, 4 A, DFE252012P_D
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components
DHT22 Digital Temperature and Humidity Sensor-Standard Quality
DHT22 Digital Temperature and Humidity Sensor-Standard Quality
The DHT22 Digital Temperature and Humidity Sensor (Standard Quality) is an affordable, easy-to-use sensor that measures both temperature and humidity. It utilizes a capacitive humidity sensor and a thermistor to detect environmental conditions, outputting a digital signal on the data pin—no need for analog input.
While the sensor is straightforward to use, it requires careful timing to read the data. One limitation is that you can only retrieve new data every 2 seconds, meaning sensor readings may be up to 2 seconds old when using the provided library.
To use the DHT22, simply connect the leftmost pin to a 3-5V power source, the middle pin to your data input, and the rightmost pin to ground. Although it sends data via a single-wire connection, it is not compatible with Dallas One Wire protocol. If you plan to use multiple sensors, each one must have its own dedicated data pin.
SKU: n/a -
Basic Electronic Components, Uncategorized
Digital LDR Module – 4Pin
Digital LDR Module – 4Pin
Introducing the Digital LDR Module – 4Pin, a reliable and versatile solution for light-dependent applications and ambient light detection in a variety of projects. Designed for accurate and rapid light intensity sensing, this module is ideal for automated lighting systems, environmental monitoring, and more.
Features:
- High-Quality Components: Utilizes an LM393 voltage comparator for reliable performance and precise light detection.
- Adjustable Sensitivity: Features an adjustable potentiometer that allows you to fine-tune the sensitivity of the module, providing flexibility in different light conditions.
- Digital and Analog Output: Offers both digital and analog output signals, allowing for versatile integration into your projects. The digital output (D0) provides a switch output, while the analog output (A0) enables more precise light intensity measurement.
- Easy Installation: Simple to install and operate, making it suitable for both beginners and experienced users alike.
- Wide Operating Voltage Range: Supports an operating voltage range of 3.3V to 5V, ensuring compatibility with a variety of power sources and microcontrollers.
SKU: n/a -
Basic Electronic Components
DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266
-65%
Basic Electronic ComponentsDOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266
DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266
The WiFi module ESP-1 utilizes the high-performance ESP8285 chip. This compact chip integrates an enhanced Tensilica L106 Diamond series 32-bit kernel CPU with SRAM, endowing the ESP8285 with full Wi-Fi functionality. It can operate independently or as a subordinate to another host CPU. As a subordinate, it boots from the onboard Flash.
The embedded high-speed buffer not only boosts system performance but also optimizes storage management. Moreover, the ESP8285 can serve as a Wi-Fi adapter via SPI/SDIO or I2C/UART interfaces when incorporated into other MCU designs.
SKU: n/a -
Basic Electronic Components
DRV8825 Stepper Motor Driver with Aluminum Heat Sink(High current limiting resistance).
-48%
Basic Electronic ComponentsDRV8825 Stepper Motor Driver with Aluminum Heat Sink(High current limiting resistance).
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
This product is a breakout board for Texas Instruments’ DRV8825 microstepping bipolar stepper motor driver with R100. It features adjustable current limiting, overcurrent and overtemperature protection, and supports six microstep resolutions (up to 1/32-step). Operating on a power supply range of 8.2 to 45 V, it can deliver around 1.5 A per phase without cooling, and up to 2.2 A with adequate cooling. The pinout and interface are similar to those of the A4988 stepper motor driver, making it a high-performance replacement for many applications.
Additionally, the board comes with an aluminum heat sink to improve heat dissipation.
SKU: n/a -
Basic Electronic Components
DS18B20 Temperature Sensor Module DS18B20 Temperature Sensor Module
DS18B20 Temperature Sensor Module
The DS18B20 Temperature Sensor Module is a digital temperature sensor that can be easily connected to an Arduino using just one 4.7kΩ resistor. The connections are simple: connect pin 1 to ground, pin 2 to the output, and pin 3 to the positive voltage source, with the resistor linked to pin 2.
This sensor utilizes the 1-wire protocol, allowing multiple sensors to be connected using a single common wire to the Arduino. The output is digitally accurate to 12 bits, enabling temperature measurements with a precision of 0.0625 ºC.
Pin Configuration
- Base 1 – GND
- Base 2 – 5V [VCC]
- Base 3 – ARDUINO
SKU: n/a -
Basic Electronic Components
DS3231 RTC Memory Module Precise Real Time Clock I2C-AT24C32
DS3231 RTC Memory Module Precise Real Time Clock I2C-AT24C32
The DS3231 RTC Memory Module with I2C interface and integrated AT24C32 offers a low-cost, highly accurate real-time clock (RTC) solution. Equipped with a temperature-compensated crystal oscillator (TCXO) and a crystal, this module ensures precise timekeeping and improves long-term accuracy by minimizing component count during production.
This RTC module keeps track of seconds, minutes, hours, days, dates, months, and years. It automatically adjusts for months with fewer than 31 days and accounts for leap years. The clock can operate in either 24-hour format or 12-hour format with AM/PM indication. It also features two configurable alarm clocks and a calendar with a square wave output. Data is transferred via a bidirectional I2C bus, providing efficient communication with the system.
The DS3231 includes a precision temperature-compensated voltage reference and comparator circuit that monitors the VCC status, detecting power failures and triggering a reset output if necessary. It can also automatically switch to backup power in the event of a failure. Additionally, a /RST pin allows for manual reset generation.
SKU: n/a -
Basic Electronic Components
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
-60%
Basic Electronic ComponentsESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
The ESP8266/ESP-12F WiFi Module (Witty Cloud Development Board + Mini NodeMCU) is an affordable, compact WiFi transceiver that offers an ideal solution for Home Automation and IoT applications. It serves as a great alternative to the NRF24L01, providing direct communication with your WiFi router via UART (Rx, Tx) from an MCU.
The ESP-12F module is one of the most feature-rich in the ESP family, offering a wide range of available pins for versatile project designs. It can be programmed to run standalone using the Arduino IDE or with LUA scripting through NodeMCU. The board comes equipped with an LDR (Light Dependent Resistor) and an onboard WS2812 RGB LED, making it ready for various projects. Additionally, it includes a CH340 micro USB module for easy programming.
The ESP8266 chip is highly integrated, incorporating an onboard antenna and power management converter. It is optimized for energy-efficient VoIP applications, with fast switching between sleep and wake modes, adaptive radio bias, and front-end signal processing for low-power operation.
SKU: n/a -
Basic Electronic Components
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
-47%
Basic Electronic ComponentsESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
The ESP8266/ESP-12F WiFi Module (Witty Cloud Development Board + Mini NodeMCU) is an affordable, compact WiFi transceiver that offers an ideal solution for Home Automation and IoT applications. It serves as a great alternative to the NRF24L01, providing direct communication with your WiFi router via UART (Rx, Tx) from an MCU.
The ESP-12F module is one of the most feature-rich in the ESP family, offering a wide range of available pins for versatile project designs. It can be programmed to run standalone using the Arduino IDE or with LUA scripting through NodeMCU. The board comes equipped with an LDR (Light Dependent Resistor) and an onboard WS2812 RGB LED, making it ready for various projects. Additionally, it includes a CH340 micro USB module for easy programming.
SKU: n/a -
Basic Electronic Components
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
-58%
Basic Electronic ComponentsEthernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
The Arduino Ethernet Shield enables your Arduino board to connect to the internet, leveraging the Wiznet W5100 Ethernet chip. This chip provides a complete network (IP) stack that supports both TCP and UDP protocols, making it ideal for internet-based projects. The Ethernet W5100 Shield also features a Micro SD card slot, allowing you to store or retrieve files over the network, and supports up to four simultaneous socket connections.
To get started, you can use the Ethernet library to write sketches that connect your Arduino to the internet. The shield is designed to connect to your Arduino board via long wire-wrap headers, ensuring the pin layout remains intact, and it allows you to stack additional shields on top without interference.
This shield is compatible with the latest Arduino UNO R3 and Mega boards. It includes a standard RJ-45 Ethernet port, with an integrated line transformer, and supports Power over Ethernet (PoE). The onboard Micro SD card slot is accessible through the SD library, and the SS pin is located on Pin 4. Please note that the shield no longer supports the full-size SD card slot available in earlier revisions.
The updated version of this Ethernet Shield also includes a reset controller, ensuring the W5100 Ethernet module resets correctly on power-up—a feature that was not available in earlier versions, which required manual resetting when used with the Mega board.
SKU: n/a -
Basic Electronic Components, Sensors
Eye Blink Sensor Project Kit
The Eye-Blink sensor works by illuminating the eye and eyelid area with infrared light, then monitoring the changes in the reflected light using a phototransistor and differentiator circuit.
This includes Arduino Nano, Eye Blink sensor, Buzzer, Battery, Clip Connector, and Switch.
Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
A Standard Active Buzzer Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.
This is a general 9v Battery for all your project and application needs.
A clip Connector is used to connect a 9V battery to the application. This snap power cable to DC 9V clip male line battery adapter for mostly used to power Arduino boards.
Rocker switch is Rocker Switch SPST ON/OFF Microswitch.
SKU: n/a
