Basic Electronic Components
Showing 169–192 of 225 results
-
-
Basic Electronic Components, Electronic Components, Wire Wound Inductors
BRC2012T2R2MD wire wound Inductor
-25%
Basic Electronic Components, Electronic Components, Wire Wound InductorsBRC2012T2R2MD wire wound Inductor
BRC2012T2R2MD
INDUCTOR, 2.2UH, 1A, 20%, 350MHZ
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
SKU: n/a -
Basic Electronic Components, Electronic Components
BREADBOARD GL-12 840 TIE POINTS SOLDERLESS DIY PROJECT CIRCUIT
-34%
Basic Electronic Components, Electronic ComponentsBREADBOARD GL-12 840 TIE POINTS SOLDERLESS DIY PROJECT CIRCUIT
Description:
- Tie-point 840
- Solderless breadboard (GL-12)
- Wire size: Suitable for 29-20 AWG wires
- Size: About 16.5*5.6*1cm
Package Includes:
1 X GL-12 Breadboard 830 Point Solderless PCB
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
BRL3225T2R2M wire wound Inductor
-25%
Basic Electronic Components, Electronic Components, Wire Wound InductorsBRL3225T2R2M wire wound Inductor
BRL3225T2R2M
WW INDUCTOR, 2.2UH 1.85A 20% 150MHZ
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
CM453232-4R7KL wire wound Inductor
-25%
Basic Electronic Components, Electronic Components, Wire Wound InductorsCM453232-4R7KL wire wound Inductor
CM453232-4R7KL
Wirewound Inductor, 4.7 µH, 1 ohm, 35 MHz, 315 mA, 1812 [4532 Metric], CM453232
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
SKU: n/a -
-
Basic Electronic Components
Desoldering Wick
Solder wick is composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process.We tried a lot of cheaper solder wick before finding this supplier. This is a cheaper version of the wick we use. We may start using it actually. It works great and the price is awesome.Features:
- Material: 100% Copper
- Useful for Faster and Cleaner electronics Desoldering work
- Thickness: Comfortable for Desoldering
- RMA Coated Wick
- length : 1feet
Package Includes:1 x Desoldering WickSKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012F-1R0M=P2 Wire Wound Inductors
-33%
Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012F-1R0M=P2 Wire Wound Inductors
DFE252012F-1R0M=P2 Wire Wound Inductors
Features:
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012PD-1R0M P2 Wire Wound Inductors
-33%Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012PD-1R0M P2 Wire Wound Inductors
Wirewound Inductor, 1 µH, 0.042 ohm, 3.2 A, DFE252012P_D
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
DFE252012PD-R47M P2 Wire Wound Inductors
-33%Basic Electronic Components, Electronic Components, Wire Wound InductorsDFE252012PD-R47M P2 Wire Wound Inductors
DFE252012PD-R47M P2 Wire Wound Inductors 470 nH, 0.027 ohm, 4 A, DFE252012P_D
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
SKU: n/a -
Basic Electronic Components, Sensors
Eye Blink Sensor Project Kit
The Eye-Blink sensor works by illuminating the eye and eyelid area with infrared light, then monitoring the changes in the reflected light using a phototransistor and differentiator circuit.
This includes Arduino Nano, Eye Blink sensor, Buzzer, Battery, Clip Connector, and Switch.
Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
A Standard Active Buzzer Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.
This is a general 9v Battery for all your project and application needs.
A clip Connector is used to connect a 9V battery to the application. This snap power cable to DC 9V clip male line battery adapter for mostly used to power Arduino boards.
Rocker switch is Rocker Switch SPST ON/OFF Microswitch.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor
GL3547-1 3mm LDR (Pack of 10)
This LDR 3mm changes resistance with the change in the ambient light exposure on the surface of the sensor. LDR (Light Dependent Resistor) is a type of photocell which finds excellent use in light sensing device application, whether it is automatic outdoor light ON/OFF switch or Indoor automatic light switch.
The LDR 3mm sensor works best in both Light and dark regions. Light-dependent resistors or photoresistors are a staple of electronics. If you need a way to sense the level of ambient light then there is no easier way to do it. As the light on the sensor increases then the resistance across the two leads decreases.
Two Cadmium Sulphide (CDs) PhotoConductive Cells with spectral responses similar to that of the human eye. Cell resistance falls with increasing light intensity. Applications of this product include smoke detection, Automatic lighting control, batch counting, and burglar alarm systems.
To know more about photo-resistor, click here. WHAT IS PHOTO-RESISTOR??
Analog Applications:
- Camera Exposure control
- Auto slide focus – dual cell
- Photocopy machines – the density of the toner
- Colorimetric Test Equipment
- Densitometer
- Electronics scales – dual cell
- Automatic gain control – modulated light source
- Automated Rear View Mirror
Digital Applications:
- Automatic Headlight Dimmer
- Nightlight control
- Oil burner flame out
- Streetlight control
- Absence / Presence (Beam breaker)
- Position sensor
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor
GL7539 7 mm LDR (Pack of 10)
This LDR 7mm changes resistance with the change in the ambient light exposure on the surface of the sensor. LDR (Light Dependent Resistor) is a type of photocell which finds excellent use in light sensing device application, whether it is automatic outdoor light ON/OFF switch or Indoor automatic light switch.
The LDR 7mm sensor works best in both Light and dark regions. Light-dependent resistors or photoresistors are a staple of electronics. If you need a way to sense the level of ambient light then there is no easier way to do it. As the light on the sensor increases then the resistance across the two leads decreases.
Two Cadmium Sulphide (CDs) PhotoConductive Cells with spectral responses similar to that of the human eye. Cell resistance falls with increasing light intensity. Applications of this product include smoke detection, Automatic lighting control, batch counting, and burglar alarm systems.
To know more about photo-resistor, click here. WHAT IS PHOTO-RESISTOR??
Analog Applications:
- Camera Exposure control
- Auto slide focus – dual cell
- Photocopy machines – the density of the toner
- Colorimetric Test Equipment
- Densitometer
- Electronics scales – dual cell
- Automatic gain control – modulated light source
- Automated Rear View Mirror
Digital Applications:
- Automatic Headlight Dimmer
- Nightlight control
- Oil burner flame out
- Streetlight control
- Absence / Presence (Beam breaker)
- Position sensor
SKU: n/a -
Basic Electronic Components, Electronic Components
GY-9833 AD9833 Programmable Sine Square Wave DDS Signal Generator
-0%
Basic Electronic Components, Electronic ComponentsGY-9833 AD9833 Programmable Sine Square Wave DDS Signal Generator
The AD9833 is a low power, programmable waveform generator capable of producing sine, triangular, and square wave outputs. Waveform generation is required in various types of sensing, actuation, and time domain reflectometry (TDR) applications. The output frequency and phase are software programmable, allowing easy tuning. No external components are needed.
The AD9833 has a standard serial interface that allows the part to interface directly with several microprocessors. The device uses an external serial clock to write the data or control information into the device.
The AD9833 is written to via a 3-wire serial interface. This serial interface operates at clock rates up to 40 MHz and is compatible with DSP and microcontroller standards. The device operates with a power supply from 2.3 V to 5.5 V.
The AD9833 has a power-down function (SLEEP). This allows sections of the device that are not being used to be powered down, thus minimizing the current consumption of the part, e.g., the DAC can be powered down when a clock output is being generated.
Features:
- Digitally programmable frequency and phase
- 12.65 mW power consumption at 3 V
- 0 MHz to 12.5 MHz output frequency range
- 28-bit resolution: 0.1 Hz at 25 MHz reference clock
- Sinusoidal, triangular, and square wave outputs
- 2.3 V to 5.5 V power supply
- No external components required
- 3-wire SPI interface
Package Includes:
1 x GY-9833 AD9833 Programmable Sine Square Wave DDS Signal Generator
Specifications :-
Power Supply 2.3 V to 5.5 V Temperature Range 40C to +105C Input Current 10A Input Capacitance 3pF Output Frequency Range 0 MHz to 12.5 MHz Length(mm) 18 Width(mm) 13 Height(mm) 8 Weight(g) 1(approx) Shipment Weight 0.01 kg Shipment Dimensions 7 4 2 cm * Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
HHBC12-1R0A0028V Differential Mode Coils
-23%
Basic Electronic Components, Electronic Components, Wire Wound InductorsHHBC12-1R0A0028V Differential Mode Coils
The KEMET HHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Si dust cores and are useful in various
fields, such as DC/DC converters and differential noise countermeasures.Applications:
- Switching power supply outlet
- DC-DC converter
- Phase compensation
- Boost converter
- Normal mode noise countermeasure
Features:
- Fe-Si dust core material
- Available for noise countermeasure as well as general use
- Good balance of core loss and DC superposition characteristics
- Wide variety of sizes and specifications
- Operating temperature range from −40°C to +125°C
Specifications:
- Model: HHBC12-1R0A0028V
- Rated Current: 5A
- Inductance (µH): 28 , 26.5
- DC Resistance/ Line (mΩ) Maximum: 21.1
- Temperature Rise1 (K) Maximum: 25
- Wire Diameter (mm): 1.0
- Weight: 13g
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
HHBC8S-0R6A0024V High Current Toroidal Inductor
-23%Basic Electronic Components, Electronic Components, Wire Wound InductorsHHBC8S-0R6A0024V High Current Toroidal Inductor
The KEMET HHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Si dust cores and are useful in various
fields, such as DC/DC converters and differential noise countermeasures.Applications:
- Switching power supply outlet
- DC-DC converter
- Phase compensation
- Boost converter
- Normal mode noise countermeasure
Features:
- Fe-Si dust core material
- Available for noise countermeasure as well as general use
- Good balance of core loss and DC superposition characteristics
- Wide variety of sizes and specifications
- Operating temperature range from −40°C to +125°C
Specifications:
- Rated Current Range: 2 – 30 A
- Rated Inductance Range: 24 – 311 µH at 0 A ±20%
- Inductance Measurement Condition: 100 kHz, 1 mA
- Wire Type: 1 UEW & 1 PEW
- Operating Temperature Range: −40°C to +125°C (include self temperature rise)
Packages Includes:
1 x High Current Toroidal Inductor
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
HHBC8S-0R6A0043V toroid coil inductor PHBC Series (Fe-Ni)
-23%Basic Electronic Components, Electronic Components, Wire Wound InductorsHHBC8S-0R6A0043V toroid coil inductor PHBC Series (Fe-Ni)
The KEMET PHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Ni dust cores and are useful in various
fields such as DC/DC converters and differential noise countermeasures.A toroid is a coil of insulated or enameled wire wound on a donut-shaped form made of powdered iron. A toroid is used as an inductor in electronic circuits, especially at low frequencies where comparatively large inductances are necessary
A toroid works as an inductor, which boosts the frequency to appropriate levels. Inductors are electronic components that are passive so that they can store energy in the form of magnetic fields. A toroid turns, and those turns induce a higher frequency. Toroids are more economical and efficient than solenoids.
Applications:
- Switching power supply outlet
- DC-DC converter
- Phase compensation
- Boost converter
- Normal mode noise solution countermeasure
Features:
- Fe-Ni dust core material
- Most suitable for big current applications
- Low core loss
- High saturation magnetic flux density
- Good DC superposition characteristics
- Wide variety of sizes and specifications
Packags Includes:
1 x HHBC8S-0R6A0043V toroid coil inductor PHBC Series (Fe-Ni)
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
HHBC8S-0R6A0067V High Current Toroidal Inductor
-28%Basic Electronic Components, Electronic Components, Wire Wound InductorsHHBC8S-0R6A0067V High Current Toroidal Inductor
The KEMET HHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Si dust cores and are useful in various
fields, such as DC/DC converters and differential noise countermeasures.Applications:
- Switching power supply outlet
- DC-DC converter
- Phase compensation
- Boost converter
- Normal mode noise countermeasure
Features:
- Fe-Si dust core material
- Available for noise countermeasure as well as general use
- Good balance of core loss and DC superposition characteristics
- Wide variety of sizes and specifications
- Operating temperature range from −40°C to +125°C
Specifications:
- Rated Current Range: 2 – 30 A
- Rated Inductance Range: 24 – 311 µH at 0 A ±20%
- Inductance Measurement Condition: 100 kHz, 1 mA
- Wire Type: 1 UEW & 1 PEW
- Operating Temperature Range: −40°C to +125°C (include self temperature rise)
Packages Includes:
1 x High Current Toroidal Inductor
SKU: n/a -
Basic Electronic Components, Electronic Components, Uncategorized
Hot Glue Gun 100W
Hot Melt Easy To Use Multi-Purpose Glue Gun for Almost All Bonding Jobs of Any Office and House. Trigger-feed For Even Glue Flow Perfect for Home Repairs, Hobbies And Crafts Lower Temperature For Delicate Materials And Safety Two Finger Trigger For Better Control.
Package Content:
1 x Glue Gun 100W
SKU: n/a -
Basic Electronic Components, Electronic Components, Uncategorized
Hot Glue Gun 60W
Hot Melt Easy To Use Multi-Purpose Glue Gun for Almost All Bonding Jobs of Any Office and House. Trigger-feed For Even Glue Flow Perfect for Home Repairs, Hobbies And Crafts Lower Temperature For Delicate Materials And Safety Two Finger Trigger For Better Control.
Package Content:
1 x Glue Gun 60W
SKU: n/a
